A delta to wye calculator converts a three-resistor delta (Δ) network to the equivalent star (Y) network, and back. Enter the three resistances and choose the direction. It gives the three resistances of the equivalent network, which is useful for simplifying circuits that are neither in series nor in parallel.
How to use the delta to wye calculator
- Choose delta to star or star to delta.
- Enter the three resistances.
- Press Calculate.
The transform
The Y-Δ transform, also called the star-triangle or Kennelly transform, replaces a delta of three resistors with an equivalent star, or the reverse [1]. Arthur Kennelly published it in 1899 [1]. The two circuits behave in the same way when seen from the three terminals, so one can be swapped for the other in a larger circuit to make it easier to solve.
Labelling
The page names the delta resistors R_a, R_b and R_c, and the star resistors R_1, R_2 and R_3 [1]. The sum of the delta resistors is R_T = R_a + R_b + R_c [1]. In the calculator, the first resistor is R_a or R_1, the second R_b or R_2, and the third R_c or R_3. Keep the order the same on the two sides when you apply the result.
Delta to star
Each star resistor is the product of the two adjacent delta resistors divided by the sum of all three: R_1 = R_b R_c ÷ R_T, R_2 = R_a R_c ÷ R_T and R_3 = R_a R_b ÷ R_T [1]. For a delta of 30, 60 and 90 ohms, R_T is 180 ohms, and the star has R_1 = 30, R_2 = 15 and R_3 = 10 ohms. The values are our own example.
Star to delta
For the reverse, each delta resistor is the sum of the products of all pairs of the star resistors, divided by the star resistor that is opposite to it: R_a = R_P ÷ R_1, with R_P = R_1 R_2 + R_2 R_3 + R_3 R_1 [1]. For the star of 30, 15 and 10 ohms, R_P is 450 + 150 + 300 = 900, and the delta is 30, 60 and 90 ohms, which is the original network.
Equal resistors
If all three resistors of a delta are equal, each star resistor is one third of it. A delta of 90 ohms each becomes a star of 30 ohms each. The page gives the same factor for balanced impedances in a three-phase generator, where Z_sY = Z_s ÷ 3 [1]. In the other direction, a balanced star of R becomes a delta of 3R. This is why balanced three-phase loads are easy to convert.
A use: the bridge
A bridge circuit that has no series or parallel combinations cannot be reduced in the usual way. Replacing a delta in it with a star turns the circuit into one that can be solved by series and parallel rules. After you find the resistance, or the current, you can return to the original circuit if you need the currents inside it.
Why it works
The page derives the transform by requiring that the resistance between each pair of terminals is the same in the two networks [1]. For example, between terminals 1 and 2, the star gives R_1 + R_2, and the delta gives R_c in parallel with R_a + R_b. Setting the three pairs equal gives the formulas. You can check any result by computing these three pair resistances.
Units
Enter the resistances in ohms or in kilohms. The result is given in the same unit. The formulas are ratios of products to sums, so they work with any consistent unit. The calculator needs all three resistances to be positive. A resistance of zero or an open circuit has to be handled as a special case, by hand.
Using the calculator
Select the direction, enter the three values in order, and press the button. Check the result with the three pair resistances, or by converting back: a delta converted to a star and then to a delta again gives the starting values. The working line shows the sum or the product that was used.
Checking a conversion
Between any two terminals, the resistance of the delta and of the star must be equal. Take the example of 30, 60 and 90 ohms with the star of 30, 15 and 10 ohms. Between terminals 2 and 3, the delta gives 30 ohms in parallel with 60 + 90, which is 25 ohms, and the star gives 15 + 10 = 25. Between terminals 1 and 2, the delta gives 90 in parallel with 30 + 60, which is 45 ohms, and the star gives 30 + 15 = 45. Between terminals 1 and 3, 60 in parallel with 30 + 90 is 40 ohms, and the star gives 30 + 10 = 40. A quick check like this catches a mislabelled resistor.
Impedances
The same formulas hold for impedances, if the three branches are made of resistors, capacitors or inductors and the signal has one frequency. The calculator takes resistances only. For impedances, use complex numbers in the same formulas, and take care with the signs of the reactances, which the reactance calculator on this site can help with.
Common mistakes
- Mixing the order of the resistors. Keep the labels consistent.
- Using the wrong direction. Check delta and star.
- Forgetting that only the terminals match. Inside voltages differ.
- Entering zero. All resistances must be positive.
What next
Use this often? Add Delta to Wye to your Home screen.
Frequently asked questions
What is a delta to wye calculator?
A tool that converts a delta network of three resistors to a star network, and back.
What is the delta to star formula?
Each star resistor is the product of the two adjacent delta resistors divided by the sum of all three.
What is the star to delta formula?
Each delta resistor is (R₁R₂ + R₂R₃ + R₃R₁) divided by the opposite star resistor.
What happens if all resistors are equal?
The star resistors are one third of the delta resistors.
Who published the transform?
Arthur Kennelly, in 1899.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.