Saved

Press the star next to a tool's name to save it.

All my tools

Damping Ratio Calculator

Use this damping ratio calculator to find the damping ratio of a mass-spring-damper from its mass, damping and stiffness, or from a logarithmic decrement or Q, with the overshoot.

Restored your last values ·

Enter a mass, a damping coefficient and a spring stiffness, or a logarithmic decrement, or a quality factor. You get the damping ratio, whether the system is underdamped, critically damped or overdamped, and related values.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you know and fill in the boxes, then press Calculate.

See full result

A damping ratio calculator finds the damping ratio of a vibrating system from its mass, damping and stiffness, or from a measured logarithmic decrement or quality factor. It tells you whether the system is underdamped, critically damped or overdamped, and gives the natural and damped frequencies and the overshoot.

How to use the damping ratio calculator

  1. Choose what you know.
  2. Enter the mass, damping and stiffness, or the other value.
  3. Press Calculate.

The damping ratio

The damping ratio ζ is a dimensionless parameter, the ratio of the actual damping to the critical damping: ζ = c ÷ c_c, with c_c = 2√(k m) [1]. For a mass of 1 kilogram, a damper of 2 newton seconds per metre and a spring of 100 newtons per metre, ζ = 2 ÷ (2 × 10) = 0.1. The calculator finds it from the three values.

The three regimes

The page gives the ranges. A system with ζ = 0 is undamped. With 0 < ζ < 1, it is underdamped and oscillates with decaying amplitude. With ζ = 1, it is critically damped and returns to rest in the shortest time without oscillating. With ζ > 1 it is overdamped, and it returns to rest slowly without oscillating [1]. The calculator names the regime.

The equation of motion

The motion of the mass follows m ẍ + c ẋ + k x = 0, which can be rewritten as ẍ + 2ζ ω_n ẋ + ω_n² x = 0, with the natural frequency ω_n = √(k ÷ m) [1]. For the example, ω_n is 10 radians per second, or 1.59 hertz. The natural frequency is the frequency at which the system would oscillate without damping.

The damped frequency

For an underdamped system, the page gives the roots of the equation as s = −ω_n (ζ ± i √(1 − ζ²)), so the oscillating part has a frequency of ω_n √(1 − ζ²) [1]. The page does not name it, but it is usually called the damped natural frequency. For ζ = 0.1, it is 9.9499 radians per second, only half a percent below ω_n. Heavy damping lowers it more.

Logarithmic decrement

The logarithmic decrement is δ = ln(x₀ ÷ x₁) for two successive peaks, and the damping ratio is ζ = δ ÷ √(δ² + (2π)²) [1]. If the peaks fall from 1 to 0.5317, δ = 0.6317 and ζ = 0.1. This is how the damping of a real system is often measured, by recording its free vibration. The reverse relation, δ = 2πζ ÷ √(1 − ζ²), is our own algebra.

Quality factor

The page gives ζ = 1 ÷ (2Q) [1], so Q = 1 ÷ (2ζ). A lightly damped system has a high Q: ζ = 0.1 means Q = 5. The quality factor is used for resonant circuits and for mechanical resonators, where it says how sharp the resonance is. Enter Q in the third mode to find the damping ratio that goes with it.

Percent overshoot

The percent overshoot of the step response of an underdamped system is PO = 100 exp(−ζ π ÷ √(1 − ζ²)) [1]. For ζ = 0.1, it is 72.9 percent: the system overshoots its final value by almost three quarters of the step. For ζ = 0.7 it is only 4.6 percent, which is why a damping ratio of about 0.7 is often chosen for control systems and instruments.

Applications

Damping ratios are used for car suspensions, buildings in earthquakes, door closers, instruments and electrical circuits. A car shock absorber is often designed with a damping ratio of about 0.2 to 0.4 for comfort, our own rough range, while a needle on a meter is damped near critical so that it settles fast without bouncing.

Limits

The calculation is for a linear system with viscous damping, in which the damping force is proportional to the speed. Friction, air drag and other kinds of damping are not exactly of this type. For a system with many parts, each mode has its own damping ratio, which this calculator does not give. It treats a single mass on a spring.

Using the calculator

Pick the mode and enter the data. Read the damping ratio and the regime. For a mass, damper and spring, also read the natural and damped frequencies. To find the damping coefficient for critical damping, set ζ = 1 and solve: c = 2√(k m). You can check it by entering that c in the first mode.

Worked examples

A mass of 2 kilograms on a spring of 200 newtons per metre has a critical damping coefficient of 2√(200 × 2), which is 40 newton seconds per metre. With a damper of 10, the damping ratio is 0.25, the natural frequency is 10 radians per second and the overshoot is 44.4 percent. With 40 it is critically damped, and with 80 it is overdamped, with a ratio of 2. These are our own calculations, and you can check them in the first mode.

Reading a recorded decay

To measure damping, strike the system and record the peaks of its free vibration. Take the ratio of two successive peaks, find its natural logarithm for the decrement and enter it in the second mode. If the peaks fall by 20 percent each cycle, the ratio is 1.25, the decrement is 0.2231 and the damping ratio is 0.0355, so the system is lightly damped, with a Q of 14.1.

Common mistakes

  • Using the logarithmic decrement of two peaks that are not successive. They must be neighbours.
  • Mixing up c and ζ. ζ is dimensionless.
  • Using it for dry friction. The damper must be viscous.
  • Expecting oscillation when ζ ≥ 1. There is none.

What next

Use this often? Add Damping Rati to your Home screen.

Frequently asked questions

What is a damping ratio calculator?

A tool that finds how strongly a vibrating system is damped.

What is the damping ratio formula?

ζ = c ÷ (2√(k m)).

What does ζ = 1 mean?

Critical damping: the system returns to rest fastest without oscillating.

How is ζ related to Q?

ζ = 1 ÷ (2Q).

What is the percent overshoot?

PO = 100 exp(−ζπ ÷ √(1 − ζ²)).

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools