Saved

Press the star next to a tool's name to save it.

All my tools

Battery Charge Time Calculator

Use this battery charge time calculator to find charge time from capacity in mAh or Ah and charging current in mA or A, with an optional overhead and the C-rate.

Restored your last values ·

%

Enter the capacity from the battery label and the charging current from the charger's output. Add an overhead percentage if you want to allow for charging losses and the slower finish of a charge.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter a value and press Calculate.

See full result

A battery charge time calculator estimates how long it takes to charge a battery from empty. Enter the battery capacity in milliamp-hours or amp-hours and the charging current in milliamps or amps, and the calculator divides one by the other. You can add an overhead percentage to allow for charging losses, and it shows the C-rate and the share of the battery charged each hour.

The battery charge time formula

Charge time (hours) = battery capacity (Ah) ÷ charging current (A)
With overhead: time × (1 + overhead ÷ 100)

Capacity is the amount of charge a battery can hold, and current is the rate at which it is added. A 5,000 mAh battery charged at 1,000 mA (1 A) gains 1,000 mAh each hour, so it takes five hours at best. A milliamp-hour is one thousandth of an amp-hour, and the calculator converts the units for you.

What is the C-rate?

Wikipedia defines the C-rate as the charge or discharge current divided by the battery's capacity to store an electrical charge. As an example it gives a 500 mAh battery with a 250 mA charge current, which corresponds to a C-rate of C/2, meaning that the current will increase the state of charge of the battery by 50 percent in one hour. In the same way, a 500 mAh battery discharged at 5,000 mA (5 A) is at 10C. The calculator shows the C-rate so that you can compare the speed of different chargers on the same battery: a higher C-rate means a faster charge.

How to use the battery charge time calculator

  1. Enter the battery capacity and choose mAh or Ah. You can find it on the battery or in its specification.
  2. Enter the charging current and choose mA or A. Use the charger's output current, or the lower of the charger's output and what the battery accepts.
  3. Optionally enter an overhead percentage for losses.
  4. Press Calculate to see the time in hours and minutes.

Worked examples

  • 500 mAh at 250 mA: 0.5 Ah ÷ 0.25 A = 2 hours, a C-rate of C/2, adding 50 percent each hour. This is the example from Wikipedia.
  • 10 Ah at 1 A: 10 hours with no overhead.
  • 5,000 mAh at 2,000 mA with 20 percent overhead: 2.5 hours × 1.2 = 3 hours.
  • 100 Ah at 10 A: 10 hours, a C-rate of 0.1C.

Why real charging takes longer

The formula gives the ideal time for a battery that accepts the full current from empty to full. In practice charging takes longer for several reasons. Some of the energy is lost as heat. Many chargers lower the current as the battery fills, to protect it, so the last part of the charge is slower. Battery capacity also changes with age and temperature. This is why the calculator lets you add an overhead. A figure of 10 to 30 percent is a common starting point, but the right number depends on the battery and the charger, so check the maker's information.

Fast charging

A charger with a higher current charges a battery faster, but the battery must be designed to accept it. Wikipedia notes that smart chargers can fast-charge a battery up to a high percentage of its capacity and then switch to a slower trickle charge. If you use a charger with a higher current than the maker recommends, you can damage the battery or shorten its life. Always match the charger to the battery.

Planning with a power bank or solar panel

The same formula helps you plan with other sources. If a solar panel supplies 0.5 A, a 12 Ah battery takes about 24 hours of full sun to charge, and in practice more. For related electrical calculations see the power converter, the wire size calculator and the voltage drop calculator.

Different battery types

The calculation is the same for any rechargeable battery, but the way a battery should be charged depends on its chemistry. Lithium-ion batteries, nickel-metal hydride batteries and lead-acid batteries each have their own charging method and limits. The calculator gives the time for a constant current, so use it as a guide to the length of a charge, and follow the maker's instructions for the charger and for the maximum current the battery can take.

Using the C-rate to compare chargers

Two chargers can be compared by the C-rate each one gives for the same battery. A current of 1 A into a 2 Ah battery is 0.5C, and a current of 2 A is 1C. A higher C-rate charges faster, but it puts more strain on the battery, and the maker's recommended rate is usually the best choice for a long battery life. If you see a battery listed with a maximum charge rate, such as 1C, you can use the calculator to find the highest current allowed and the shortest ideal charge time.

Common mistakes

  • Mixing mAh and Ah. 1 Ah is 1,000 mAh.
  • Using the charger's maximum rating instead of the actual current. The battery or device may accept less.
  • Forgetting the overhead. The ideal time is a minimum.
  • Charging a battery from a different battery type. Use the charger made for your battery chemistry.

What next

Use this often? Add Battery Char to your Home screen.

Frequently asked questions

How does a battery charge time calculator work?

It divides the battery capacity in amp-hours by the charging current in amps, then multiplies by one plus your overhead to allow for losses.

How do you calculate battery charging time?

Divide the capacity by the current. A 500 mAh battery charged at 250 mA takes 0.5 Ah ÷ 0.25 A = 2 hours at best.

What is the C-rate of a battery?

Wikipedia defines it as the charge or discharge current divided by the battery's capacity. A 250 mA current into a 500 mAh battery is C/2.

Why does charging take longer than the formula says?

Some energy is lost as heat and many chargers slow down near full charge, so real charging takes longer. Add an overhead percentage to allow for it.

Can I use a charger with a higher current?

Only if the battery and device are designed for it. Too high a current can damage a battery, so use the charger made for it.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools