Saved

Press the star next to a tool's name to save it.

All my tools

Battery Capacity Calculator

Use this battery capacity calculator to convert amp-hours to watt-hours, find how long a battery runs a load, and work out the battery size that you need.

Restored your last values ·

Enter the capacity and the voltage to convert between ampere-hours and watt-hours. To find a runtime, add the load and the share of the capacity that you can use. To find the size of a battery, enter the load, the hours and the voltage.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you want, enter the capacity or the load and the voltage, then press Calculate.

See full result

A battery capacity calculator converts between ampere-hours and watt-hours, tells you how long a battery will run a load, and finds the size of the battery that you need. Enter the capacity and the voltage, and it gives the energy in watt-hours and kilowatt-hours, the charge in coulombs and the energy in joules. Add a load to get the runtime. It is useful for solar systems, camping, e-bikes, power banks and backup power. It runs in your browser.

How to use the battery capacity calculator

  1. Choose convert, how long it lasts or the size needed.
  2. Enter the capacity with its unit, and the voltage.
  3. For a runtime or a size, enter the load and the usable share of the capacity.
  4. Press Calculate.

Ampere-hours and coulombs

The Wikipedia article on the ampere-hour says that it corresponds to the charge transferred by a steady current of one ampere flowing for one hour, or 3,600 seconds, so that 1 A·h equals 3,600 coulombs, or 3.6 kC.[1] A battery rated at 100 Ah holds 360,000 coulombs. The page notes that the ampere-hour is a unit of charge, and not of energy, so a 1 Ah battery at 1.5 V provides much less energy than a 1 Ah battery at 12 V.[1] Small batteries are rated in milliampere-hours, with 1,000 mAh equal to 1 Ah. A phone battery of 2,500 mAh holds 2.5 Ah.

Watt-hours

Energy is what matters for how long a battery runs a device. The article on the kilowatt-hour gives the watt-hour as 3,600 joules, and says that the capacity of a battery is usually expressed in ampere-hours, and that the energy in watt-hours can be found from it by the voltage.[2] The ampere-hour article says that to calculate power, the current in amperes is multiplied by the voltage in volts to give power in watts.[1] Together, these give the energy in watt-hours as the capacity in ampere-hours times the voltage, which is a short derivation from the two statements. A 12 V battery of 100 Ah stores 1,200 Wh, or 1.2 kWh, and a 3.7 V phone battery of 2,500 mAh stores 9.25 Wh.

How long will a battery last?

The runtime is the usable energy divided by the power of the load. A load of 100 W on the 12 V, 100 Ah battery would run it for 12 hours, if all of the energy could be used. If you can use only 80 percent, which is common for lead-acid batteries that should not be drained fully, the usable energy is 960 Wh and the runtime is 9.6 hours, which is 9 hours and 36 minutes. If the load is given in amperes, the calculator multiplies by the voltage to get the power, so 10 A at 12 V is 120 W.

The size that you need

To choose a battery, start with the load and the time. A device that uses 100 W for 5 hours needs 500 Wh. If only 80 percent of the capacity is usable, the battery must hold 500 ÷ 0.8 = 625 Wh, which is 52.1 Ah at 12 V. The calculator gives the energy in watt-hours and kilowatt-hours, and the capacity in ampere-hours for your voltage. Add a margin of 10 to 20 percent for cold weather and aging.

Why real runtimes are shorter

The ampere-hour article notes that the rated capacity depends on the rate of discharge: a 10 Ah battery can usually deliver 0.5 A for 20 hours, but it might not be able to deliver 20 A for half an hour. As the discharge current increases, the capacity decreases, an effect that is known as Peukert's law.[1] The kilowatt-hour article gives a similar example: a 500 mA USB device on a 2,500 mAh battery runs for about 3.7 hours, not five.[2] The conversion between watt-hours and ampere-hours is approximate, because the voltage of a battery is not constant, and higher discharge rates reduce the usable energy.[2] The calculator uses a simple model, and the usable share lets you allow for these losses.

Examples

An electric car battery of 20,736 Wh, which is 96 cells at 3.6 V and 60 Ah, is the example that the ampere-hour article gives for a car.[1] A power bank of 20,000 mAh at 3.7 V holds 74 Wh, which can charge a 15 Wh phone about four times, allowing for losses. A camping fridge that draws 40 W on average for 24 hours needs 960 Wh, which is a 12 V battery of 80 Ah if the whole capacity is used, or 100 Ah at 80 percent. You can check these numbers in the calculator.

Series and parallel batteries

When you connect batteries in series, the voltages add up and the capacity in ampere-hours stays the same. When you connect them in parallel, the capacity adds and the voltage stays the same. In both cases the total energy in watt-hours is the sum of the energy of the batteries. Four 12 V, 100 Ah batteries hold 4,800 Wh together, whether they are connected as one 48 V bank of 100 Ah or as one 12 V bank of 400 Ah. Use the total voltage of your bank in the calculator.

Battery chemistry and the usable share

The usable share depends on the type of battery. Lead-acid batteries last longest if they are discharged to about half, while lithium iron phosphate batteries can often be used down to 80 percent or more. Check the data sheet of your battery for the recommended depth of discharge, and enter it as the usable share to make the runtime realistic.

Common mistakes

  • Comparing ampere-hours at different voltages. Compare watt-hours.
  • Using the full rated capacity. Many batteries should not be fully discharged.
  • Mixing up watts and watt-hours. Watts are a rate, and watt-hours are an amount.
  • Ignoring the cold. Batteries give less in low temperatures.

What next

Use this often? Add Battery Capa to your Home screen.

Frequently asked questions

What is a battery capacity calculator?

A tool that converts battery capacity between ampere-hours and watt-hours, estimates how long a battery lasts for a load, and finds the size needed.

How do I convert amp-hours to watt-hours?

Multiply the ampere-hours by the voltage. A 12 V, 100 Ah battery holds 1,200 Wh.

How long will a battery last?

Divide its usable energy in watt-hours by the load in watts. 960 Wh of usable energy running 100 W lasts 9.6 hours.

How many coulombs are in an ampere-hour?

3,600. One ampere for one hour transfers 3,600 coulombs of charge.

Why does a battery last less than its rating?

The usable capacity falls at high loads, in the cold and as the battery ages, and some batteries should not be fully discharged.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools