Saved

Press the star next to a tool's name to save it.

All my tools

Baseboard and Trim Calculator

Use this baseboard calculator to find how much baseboard or trim a room needs and how many pieces to buy, after subtracting door openings and adding a waste allowance.

Restored your last values ·

%

Enter the room size, door openings, waste allowance and piece length. You get the wall length, the length with waste, the number of pieces and the leftover.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the room size and the piece length, then press Calculate.

See full result

This baseboard calculator works out how much baseboard or trim you need for a room and how many pieces to buy. Enter the room length and width, the number and width of door openings, a waste allowance and the length of the pieces sold at your store. It returns the wall length, the length after door openings, the length with waste, the number of pieces and the leftover. Baseboard is the trim along the bottom of a wall, typically under 8 inches (0.2 metres) high, about ankle height [1].

How to use the baseboard calculator

  1. Choose US (feet) or Metric (metres).
  2. Enter the length and width of the room, measured along the walls.
  3. Enter how many door openings the trim will skip, and the width of one opening. Leave the width empty to use 3 feet or 0.9 metre.
  4. Enter the waste allowance. Leave it empty to use 10 percent.
  5. Enter the length of one piece, for example 8 feet or 2.4 metres.
  6. Add a price per piece if you want a cost. Press Calculate.

How the numbers are worked out

The steps are plain arithmetic, so this is our own working rather than a published rule.

  • Perimeter = 2 × (length + width).
  • Net length = perimeter − (number of door openings × door width). Baseboard does not run across a doorway.
  • Length with waste = net length × (1 + waste percent ÷ 100).
  • Pieces = length with waste ÷ piece length, rounded up to the next whole piece.
  • Leftover = pieces × piece length − length with waste.
  • Cost = pieces × price per piece.

Worked example

A room is 14 feet by 12 feet. It has two door openings, each 3 feet wide. You add 10 percent for waste and buy 8 foot pieces at 12.50 each.

The perimeter is 2 × (14 + 12) = 52 feet. Take off the doors: 52 − 2 × 3 = 46 feet. Add 10 percent: 46 × 1.10 = 50.6 feet. Divide by 8: 6.325, which rounds up to 7 pieces. The leftover is 7 × 8 − 50.6 = 5.4 feet, and the cost is 7 × 12.50 = 87.50.

Measuring the room

Measure along the base of each wall, from corner to corner, with a tape measure, and write each length down. In a plain rectangular room opposite walls match, so two measurements are enough. If your room is out of square by a little, use the longer reading for each pair. Measure to the wall surface, not to the old trim, and round up to the next inch. Doing this once, carefully, is quicker than a second trip to the store when you come up one piece short.

Check the piece length before you shop. Stock lengths differ between suppliers and between materials. Solid wood may come in lengths such as 8, 12 or 16 feet, while finger-jointed and primed pieces may be shorter. Longer pieces mean fewer joints but are harder to carry and to handle in a small room.

How much waste should I add?

SituationSuggested waste
Simple room, few corners, butt joints or coping done carefully5 to 10 percent
Many corners, bays or angled walls10 to 15 percent
Painted trim where small defects can be caulked5 to 10 percent
Stained trim where grain and colour must match10 to 15 percent

These ranges are common rules of thumb and our own working, not figures from a standard. Every corner and every joint wastes a little wood, and a bad cut needs a spare piece.

Planning cuts to cut waste

The calculator adds up total length, but a piece cannot be bought in fractions, and a joint should fall on a wall stud when possible. Where a wall is longer than one piece, plan the joint with a scarf cut, a long angled cut, so that the seam is less visible. Where a wall is shorter than one piece, use the offcut from another wall. Write down the length of every wall first, then list which piece covers which wall.

For a room where one wall is close to the length of a piece, the count can change by one when waste is added. If the result is just over a whole number, such as 6.05 pieces, think about buying the extra piece, because it is cheaper than a second trip.

Trim types this tool also covers

  • Baseboard along the floor.
  • Shoe or quarter-round along the base of the baseboard, which uses the same wall length.
  • Chair rail or picture rail, which runs the same walls at a different height.
  • Door casing, which you can estimate separately by adding the head and the two legs of each door.

For several rooms, run the calculator once per room and add the piece counts, or pool the leftovers by hand. Leftovers from one room often cover a short wall in another.

Common mistakes

  • Measuring the room by floor area. Use the length of the walls, because baseboard follows them.
  • Forgetting closets. A closet adds walls and its own door opening. Run it as a second room.
  • Not deducting doorways. Over-ordering by a few feet per door adds up over a whole house.
  • Mixing feet and metres. Use the US or Metric switch and keep every length in the same unit.
  • Forgetting alcoves and bay windows. Their extra wall length is not in a simple length-and-width box, so add it by hand.

The calculator assumes a rectangular room. For an L-shaped or irregular room, split it into rectangles and add the wall lengths that are exposed. This is an estimate to help you shop, so measure again before you buy.

What next

Use this often? Add Baseboard an to your Home screen.

Frequently asked questions

How do I use a baseboard calculator?

Enter the room length and width, the number and width of door openings, the waste allowance and the length of each piece. The tool returns the total length, the pieces to buy and the leftover.

How much baseboard do I need for a 12 by 14 room?

The walls add up to 52 feet. With two 3 foot door openings that is 46 feet, and with 10 percent waste 50.6 feet, or 7 pieces of 8 feet.

Should I subtract doors from baseboard?

Yes. Baseboard does not run across a doorway, so subtract the width of each opening from the wall length before adding waste.

How much waste should I allow for trim?

A common rule of thumb is 5 to 10 percent for simple rooms and 10 to 15 percent for rooms with many corners or angled walls.

Does it work for shoe molding or quarter round?

Yes. Shoe and quarter round run along the same walls as the baseboard, so the same wall length applies.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools