Saved

Press the star next to a tool's name to save it.

All my tools

Volume to Weight Converter

Use this volume to weight calculator to find the mass of water, metal, concrete, wood, sand and more from a volume in litres, gallons, cubic feet and other units.

Restored your last values ·

Pick the volume, its unit and the material. For a material that is not listed, choose Other and enter its density in kg/m³ (multiply g/cm³ by 1,000).

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter a value and press Calculate.

See full result

A volume to weight calculator finds how heavy a given volume of a material is. Enter the volume, choose its unit and the material, and the calculator multiplies by the material's density. It shows the weight in kilograms, pounds, grams and tonnes, with a list of common materials and the option to enter your own density.

The volume to weight formula

mass = density × volume

Wikipedia defines density as mass per unit volume, written ρ = m ÷ V, so mass is density times volume. If the density is in kilograms per cubic metre and the volume in cubic metres, the mass comes out in kilograms. The calculator converts your volume to cubic metres first, so you can enter litres, gallons, cubic feet or any of the other units it offers.

Why you need the material

Volume alone does not tell you weight. A litre of water has a mass of about one kilogram, but a litre of lead has more than eleven kilograms and a litre of pine less than half a kilogram. That is why every volume to weight conversion needs a density. The table below shows the values used by the calculator, from the list of densities on Wikipedia, in kilograms per cubic metre at standard conditions unless noted.

MaterialDensity (kg/m³)
Water (fresh)1,000
Seawater1,030
Ice916.7
Aluminium2,700
Mild steel7,850
Iron7,870
Copper8,940
Brass8,600
Lead11,340
Gold19,320
Silver10,500
Concrete2,400
Glass2,500
Oak710
Pine373
Wood (seasoned, typical)700
Sand1,600
Mercury13,546

How to use the volume to weight calculator

  1. Enter the volume and choose its unit.
  2. Choose the material from the list, or pick Other and type its density in kg/m³.
  3. Press Calculate to see the weight in kilograms, pounds, grams and tonnes.

Worked examples

  • 10 litres of water: 0.01 m³ × 1,000 kg/m³ = 10 kg, or 22.05 lb.
  • 1 cubic metre of concrete: 1 × 2,400 = 2,400 kg, or about 2.4 tonnes.
  • 1 cubic foot of aluminium: 0.02832 m³ × 2,700 = 76.5 kg.
  • 5 US gallons of water: 18.93 litres, which is 18.93 kg or 41.7 lb.
  • 100 mL of mercury: 0.0001 m³ × 13,546 = 1.355 kg.

Weight and mass

Strictly, this calculator gives mass, which is what a scale measures in kilograms or pounds. Weight is the force of gravity on that mass. In everyday use, and on shipping labels, people say weight for mass, and the calculator follows that habit. The values are the same anywhere on Earth for practical purposes.

When densities vary

The values above are typical figures. Concrete mixes differ, wood changes with moisture and species, and sand can range from 1,600 to 2,000 kg/m³ according to Wikipedia. If you have a figure from a supplier or a datasheet, choose Other and use it. For a solid box, you can also try the rectangular cuboid weight calculator, which works from dimensions. To convert between density units use the density converter.

Weight of liquids by the gallon

Liquids are often bought by volume but shipped or lifted by weight. Fresh water is about 1 kg per litre, so a US gallon of 3.785 litres weighs about 3.79 kg, or 8.34 lb. Seawater, with a density of 1,030 kg/m³ listed on Wikipedia for 3 percent salinity, is about 3 percent heavier. Cooking oil, at roughly 910 to 930 kg/m³, floats on water. Entering a volume in gallons and choosing the liquid gives a quick figure for the load on a shelf, a trailer or a floor.

Building materials

For construction jobs the weight of a pour or a pile matters for transport, formwork and structural limits. A cubic yard of concrete is 0.7646 m³, so at 2,400 kg/m³ it weighs about 1,835 kg, or roughly 4,046 lb. A cubic yard of sand at 1,600 kg/m³ weighs about 1,223 kg, though damp sand and the upper end of the range can reach 2,000 kg/m³, which is about 1,529 kg. Use the calculator for a first estimate, then check against the supplier's delivery ticket.

Checking a load before you lift

Before moving a heavy container, tank or pile of material, work out its weight first. Enter the volume of the container, choose what is inside and compare the result with the rating of the shelf, trolley, vehicle or floor that will carry it. If the estimate is close to the limit, split the load into smaller parts.

Metals and solid parts

For a solid metal part, find its volume from the dimensions and enter it in cubic centimetres or cubic inches, then pick the metal. A 100 cm³ block of mild steel weighs 0.785 kg, while the same block in aluminium weighs 0.27 kg and in lead 1.134 kg. This is a handy way to compare materials for a design where weight matters. Remember that alloys vary, so the figures are typical values and not a replacement for a material datasheet. For anything safety-critical, such as lifting or load-bearing parts, use the supplier's data and allow a margin, because small differences in composition or moisture change the weight a little.

Common mistakes

  • Using volume units that do not match the density. The calculator converts the volume for you, but check the unit you chose.
  • Confusing grams per cubic centimetre with kilograms per cubic metre. They differ by a factor of 1,000.
  • Forgetting moisture. Wet sand and green wood weigh more than the typical dry values.
  • Assuming liquids all weigh the same as water. Oil is lighter and mercury much heavier.

What next

Use this often? Add Volume to We to your Home screen.

Frequently asked questions

How does a volume to weight calculator work?

It converts your volume to cubic metres and multiplies by the material's density. Mass equals density times volume.

How do you convert volume to weight?

Multiply the volume by the density of the material. For 10 litres of water, 0.01 m³ × 1,000 kg/m³ gives 10 kg.

How much does a cubic metre of concrete weigh?

About 2,400 kg using the density listed on Wikipedia. Real mixes vary, so check the supplier's figure.

Is one litre always one kilogram?

Only for water, which has a density of about 1,000 kg/m³. Other liquids and materials have different densities.

What if my material is not in the list?

Choose Other and enter its density in kg/m³. To convert from g/cm³, multiply by 1,000.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools