Saved

Press the star next to a tool's name to save it.

All my tools

Rectangular Cuboid Weight Calculator

Use this rectangular cuboid weight calculator to work out the weight of a solid rectangular block, plate or bar from its size and material.

Restored your last values ·

Enter the three dimensions of a solid rectangular block, plate or bar in the same unit.

Everything is worked out in your browser. Nothing you type is sent anywhere.

Weight

–

Enter the material and dimensions, then press Calculate.

See full result

This rectangular cuboid weight calculator works out the weight of a solid rectangular block, plate or bar from its size and material. Choose the material, enter the length, width and height, and the rectangular cuboid weight calculator gives the weight in pounds and kilograms, along with the volume, using typical densities from Wikipedia's list of material densities.

How to use the rectangular cuboid weight calculator

  1. Choose the material, or Other to enter your own density.
  2. Choose the unit for the dimensions: inches, feet, millimeters, centimeters or meters.
  3. Enter the length, width and height.
  4. Enter a quantity if you have several identical pieces, then press Calculate.

The weight formula

A rectangular cuboid is a box shape with six rectangular faces. Its volume is length × width × height. Wikipedia defines density as mass divided by volume (ρ = m ÷ V), so the mass is the volume times the density:

weight = length × width × height × density

The calculator converts your dimensions to meters, multiplies by the density in kilograms per cubic meter, and converts the result to pounds as well.

Densities used

These typical densities come from the list of materials in Wikipedia's article on density, given in kilograms per cubic meter:

MaterialDensity (kg/m³)
Mild steel7,850
Iron7,870
Aluminum2,700
Copper8,940
Brass8,600
Lead11,340
Concrete2,400
Glass2,500
Granite2,700
Wood (seasoned, typical)700
Oak710
Pine373
Water (fresh)1,000

The calculator also includes silver, gold, titanium, zinc, plastic, nylon, ice and cork from the same list.

Worked example

An aluminum plate 12 × 6 × 1 inch has a volume of 72 cubic inches, about 0.00118 cubic meters. At 2,700 kg/m³, it weighs about 3.19 kilograms, or 7.02 pounds. The same size in mild steel, at 7,850 kg/m³, would weigh about 20.4 pounds. In metric, a steel bar 100 × 50 × 20 mm weighs 0.1 × 0.05 × 0.02 × 7,850 = 0.785 kilograms.

Reading the results

The big number is the total weight, in pounds if you entered inches or feet, or kilograms for metric units. The table shows the weight in the other unit, the volume, the density used and, for several pieces, the weight of each one.

Why density matters

Two blocks of the same size can weigh very different amounts. Lead is more than four times as dense as aluminum, and pine is about half as dense as oak. Knowing the weight helps when planning lifting and shipping, checking a shelf or floor load, or estimating the cost of material sold by weight. For metals sold by the pound or kilogram, the weight times the price gives the material cost.

Choosing units

You can enter the dimensions in inches, feet, millimeters, centimeters or meters, as long as all three use the same unit. If you work in inches or feet, the calculator shows the weight in pounds first and the volume in cubic feet; in metric units, it shows kilograms and cubic meters. A cubic foot is about 0.0283 cubic meters, so a cubic foot of mild steel weighs about 222 kilograms, or 490 pounds.

Plates, bars and blocks

The same calculation works for any solid shape with square corners. A plate is a cuboid with a small height, a bar is long and narrow, and a block is closer to a cube. For a flat plate, the height is its thickness. For a square bar, the width and height are the same. Enter the quantity to get the total weight of several identical pieces, such as a set of plates for a project.

Other materials

If your material isn't in the list, choose Other and enter its density in kilograms per cubic meter. You can find densities on a supplier's data sheet. To convert from grams per cubic centimeter, multiply by 1,000; Wikipedia notes that 1 g/cm³ equals 1,000 kg/m³, the density of water. Stone, plastics and woods vary from piece to piece, so treat the result as an estimate for those materials.

Comparing materials

Running the same size through different materials shows how much they differ. For a 12 × 6 × 1-inch block, the calculator gives about 1.8 pounds in oak, 6.2 pounds in concrete, 7.0 pounds in aluminum, 20.4 pounds in mild steel, 23.2 pounds in copper and 29.5 pounds in lead. This can help you choose a material for something that needs to be light or heavy.

Weight for shipping and lifting

Knowing the weight before you order or move a part helps you plan. Check that a shelf, bench or vehicle can carry the load, and that you have enough people or lifting equipment to handle it safely. For stock sold by weight, the total weight times the price per pound or kilogram gives a quick estimate of the material cost.

Common mistakes

  • Mixing units. Enter all three dimensions in the same unit.
  • Using it for hollow shapes. Tubes and channels weigh less than solid blocks.
  • Assuming all wood is the same. Pine and oak differ a lot.
  • Forgetting the quantity. Multiply for several pieces.

Tips

  • Use the exact alloy density from the supplier when it matters.
  • Measure thickness with calipers for thin plates.
  • Add packaging when estimating shipping weight.

What next

Use this often? Add Rectangular to your Home screen.

Frequently asked questions

How does a rectangular cuboid weight calculator work?

It multiplies length × width × height to get the volume, then multiplies by the material's density.

How much does a 12 × 6 × 1 inch aluminum plate weigh?

About 7.02 pounds, at 2,700 kg/m³.

What is the density of steel?

Wikipedia lists mild steel at 7,850 kg/m³.

How do I find the weight of a steel block?

Multiply its volume in cubic meters by 7,850 to get kilograms.

Can I use it for wood?

Yes; choose oak, pine or typical seasoned wood, or enter your own density.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools