Saved

Press the star next to a tool's name to save it.

All my tools

Vocal Range Calculator

Use this vocal range calculator to find the width of your voice in semitones and octaves from your lowest and highest notes, with the closest voice type.

Type your lowest and highest notes in scientific pitch notation: a letter, an optional sharp (#) or flat (b), and the octave number, such as A2 or F#4. Middle C is C4.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter your lowest and highest notes, then press Calculate.

A vocal range calculator measures the span between your lowest and your highest note. Type the two notes, and it shows the range in semitones and octaves, the frequencies of the notes, and the voice type whose typical range is closest to yours.

How to use the vocal range calculator

  1. Type your lowest note, for example A2.
  2. Type your highest note, for example E4.
  3. Press Calculate.

What a vocal range is

A vocal range is the span from the lowest to the highest note that a voice can produce [1]. Singers usually give it in notes, such as A2 to E4, or in octaves. The calculator takes the two notes that you can sing and turns them into a width in semitones and octaves, which makes it easy to compare ranges.

Writing a note

Notes are written in scientific pitch notation. The letter A to G is followed by an optional # for a sharp or b for a flat, and then the octave number from 0 to 8. Middle C on a piano is C4. A2 is the A below the bass clef staff, and E4 is the E at the bottom line of the treble clef. The tool accepts capitals or small letters.

Counting semitones

This part is our own working. Each note gets a number: 12 times the octave plus the number of semitones above C, with C as 0, D as 2, E as 4, F as 5, G as 7, A as 9 and B as 11. A sharp adds 1 and a flat subtracts 1. The range in semitones is the number of the high note minus the number of the low note. A2 is 33 and E4 is 52, so the range is 19 semitones.

Semitones to octaves

An octave is 12 semitones, so the width in octaves is the number of semitones divided by 12. For 19 semitones this is 1.5833 octaves, which we also write as one octave and seven semitones. We show the exact figure from the semitones and do not round it to 1.5 octaves.

Voice types

The Wikipedia article lists typical ranges for the six main voice types: soprano C4 to G6, mezzo-soprano A3 to G5, contralto F3 to C5, tenor D3 to A4, baritone B2 to F4 and bass G2 to C4 [1]. The article says that these ranges are approximate and should not be applied too rigidly. The tool uses these figures for the voice types.

Closest voice type

This is our own working. For each type, the tool counts the semitones that your range shares with the typical range. The type with the largest overlap is shown as the closest. For A2 to E4 the baritone shares 17 semitones, the bass 15 and the tenor 14, so the baritone is the closest. If your range sits entirely inside one typical range, the tool also says so.

Frequencies

The tool also gives the pitch of each note, using equal temperament with A4 at 440 hertz. This is our own working and a common tuning, and it is not taken from the pages. The frequency of a note is 440 times two to the power of its distance in semitones from A4, divided by 12. A2 is 110 hertz and E4 is about 329.63 hertz.

Why ranges differ

Published ranges for the voice types do not agree on every note, and the Wikipedia article says that its limits are approximate [1]. That is why the tool calls the result the closest type, and not your voice type.

What the tool cannot judge

A classification also depends on the timbre of the voice and on the tessitura, the range in which you sing most comfortably. A calculator cannot hear these. It also cannot tell falsetto or whistle notes from your normal voice, so enter notes that you can sing with a steady tone. The range here is what you type, not a measurement.

Using the calculator

Find your notes with a piano or a tuner app, sing from low to high, and write down the lowest and the highest note that you can hold. Type them and press the button. Check your range again after a few weeks of practice, because ranges often grow with training, and compare the semitone count to see by how much.

Choosing songs for your range

Once you know your range, you can compare it with the range of a song. Find the lowest and highest notes of the melody, type them in, and see how many semitones the song needs. If the song is wider than your range, try a different key. Moving a song up or down by a few semitones keeps the tune the same and shifts every note, so the whole melody can fit between your notes. This is our own practical advice, and it needs no source.

Comparing your range over time

Write down your range now, then enter it again after a few weeks of regular, gentle practice. The semitone count makes the change easy to see: a gain of three semitones is a quarter of an octave. Always sing within what is comfortable, and stop if your voice hurts.

Common mistakes

  • Writing the note without an octave. A2 and A3 are different notes, so type the octave.
  • Mixing up the highest and the lowest note. The second box must hold the higher note.
  • Counting falsetto notes. Use notes that you can sing in a steady voice.
  • Treating the voice type as a diagnosis. A teacher decides your classification.

What next

Use this often? Add Vocal Range to your Home screen.

Frequently asked questions

What is a vocal range calculator?

A tool that turns your lowest and highest notes into a range in semitones and octaves.

How many octaves is A2 to E4?

19 semitones, which is 1.5833 octaves or one octave and seven semitones.

What are the typical ranges of the voice types?

Soprano C4 to G6, mezzo-soprano A3 to G5, contralto F3 to C5, tenor D3 to A4, baritone B2 to F4 and bass G2 to C4.

How accurate is the vocal range calculator at finding my voice type?

It shows the closest typical range, which is only a guide. A teacher decides the real classification.

Is middle C C4?

Yes. Middle C is C4 in scientific pitch notation, and the A above it is A4 at 440 hertz.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Education Tools