Saved

Press the star next to a tool's name to save it.

All my tools

Exposure Calculator

Use this exposure calculator to find exposure value from aperture and shutter time, the shutter or aperture for a scene's EV at any ISO, and equivalent exposures.

Restored your last values ·

Enter the aperture and shutter time to get the exposure value. Or enter the scene's EV100 and the aperture to find the shutter time, or the shutter time to find the aperture. The last option gives the equivalent shutter time for a different aperture.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you want, enter the settings, then press Calculate.

An exposure calculator works with exposure value, the single number that ties the aperture, the shutter time and the ISO together. Enter an aperture and a shutter time and you get the exposure value. Enter the brightness of the scene and you get the shutter time or the aperture that exposes it correctly. A fourth mode finds the equivalent shutter time when you change the aperture. It runs in your browser.

How to use the exposure calculator

  1. Choose what you want to find.
  2. Enter the aperture as an f-number, the shutter time in seconds or as a fraction such as 1/125, and the ISO.
  3. For the scene modes, enter the scene's EV100.
  4. Press Calculate.

What exposure value is

The Wikipedia article on exposure value defines it as EV = log₂(N² ÷ t), where N is the f-number and t is the exposure time in seconds. EV 0 corresponds to an exposure time of 1 second and an aperture of f/1.0.[1] The page's example is that a shutter time of 1/125 second at f/16 corresponds to a single number, EV 15.[1] The calculator gives 14.97 for those settings, which rounds to 15, and it shows the nearest standard setting. One step of the exposure value is one stop: it halves or doubles the light.

Adjusting for ISO

The exposure value as defined does not include the ISO speed. The article corrects for it with EV_S = EV100 + log₂(S ÷ 100), where S is the ISO speed.[1] Raising the ISO from 100 to 400 adds 2 to the value, and lowering it to 50 subtracts 1.[1] The page works two examples. A night sports scene with an EV100 of 9 at ISO 400 is EV 11, and a rainbow under a cloudy sky at 14, shot at ISO 50, is EV 13.[1] The calculator uses the same relation, and it shows the EV at your ISO and at ISO 100.

Scene brightness

The scene modes start from the EV100 of the light. The article has a table of typical values for ISO 100: light sand or snow in full sun is 16, a typical scene in full or hazy sun is 15, a bright cloudy day is 13, a heavy overcast sky is 12, and home interiors are 5 to 7.[1] Pick the value that is nearest to your scene, enter it with the aperture, and the calculator gives the shutter time. With f/8 and an EV100 of 13, the time is 64 ÷ 2¹³, which is 1/128 second, close to the standard 1/125.

Equivalent exposures

Many pairs of aperture and shutter time give the same exposure. The page notes that the exposure is proportional to t ÷ N², and it follows that the new time is the old time times the new f-number squared over the old f-number squared.[1] Going from f/8 at 1/60 second to f/11 gives 1/60 × (11 ÷ 8)² = 1/31.7 second, which is about 1/30 second, a loss of 0.92 stops of aperture that the longer time makes up. The calculator shows the nearest standard time and the change in stops. The page also stresses that equal exposure values do not give the same picture: the f-number sets the depth of field and the shutter time sets the motion blur.[1]

Standard settings

The full-stop f-numbers listed in the article are 1.0, 1.4, 2.0, 2.8, 4.0, 5.6, 8.0, 11, 16, 22, 32, 45 and 64.[1] Shutter times run in steps of about a factor of two: 1/2000, 1/1000, 1/500, 1/250, 1/125, 1/60, 1/30, 1/15, 1/8, 1/4, 1/2, 1 second and longer.[1] When the exact result falls between two settings, the calculator names the nearest one, which you can use on a camera with whole stops. Most cameras also offer third-stop steps in between.

Exposure compensation

When you want a lighter or darker picture than the meter suggests, you use exposure compensation. The page notes that adding one stop of compensation gives more exposure and a lower exposure value, so a metered value of 16 with +1 compensation becomes 15.[1] In the calculator, you can enter a lower scene EV to ask for more light.

Worked examples

Outdoors on a bright cloudy day the scene is about EV100 13. At ISO 400 the exposure value to set is 13 + 2 = 15, and with an aperture of f/5.6 the shutter time is 5.6² ÷ 2¹⁵, which is about 1/1,040 second, so use 1/1,000. Indoors, a room at EV100 6 shot at ISO 800 needs 6 + 3 = 9. At f/2.8, the time is 2.8² ÷ 2⁹, about 1/65 second, close to the standard 1/60. Going the other way, if you hold the shutter at 1/125 second for a sharp picture of a moving subject, and the scene is EV100 15, the aperture is f/16.2 at ISO 100, which is close to f/16. These are the steps that the calculator does in one go, and each uses the relations above.

Choosing between equivalent settings

Once you know the exposure value, choose the pair of aperture and shutter time for the effect that you want. A wide aperture, such as f/2.8, gives a shallow depth of field and needs a short shutter time, which freezes motion. A narrow aperture, such as f/16, keeps more of the scene sharp and needs a longer time. The equivalent mode shows the time for each aperture, so you can step through f/5.6, f/8 and f/11 and read off the times. If the time gets too long to hold the camera by hand, raise the ISO by the number of stops you are short of.

Common mistakes

  • Mixing up f-numbers and stops. One stop of aperture is a factor of the square root of two in the f-number.
  • Forgetting the ISO. Enter it, or the scene EV is for ISO 100.
  • Typing 125 for 1/125. A shutter time of 125 is two minutes.
  • Expecting the same look. Equal EV does not mean equal blur.

What next

Use this often? Add Exposure to your Home screen.

Frequently asked questions

What is an exposure calculator?

A tool that links aperture, shutter time and ISO through the exposure value, and finds equivalent settings.

What is the exposure value formula?

EV = log₂(N² ÷ t), with N the f-number and t the shutter time in seconds. 1/125 s at f/16 is about EV 15.

How does ISO change the exposure value?

EV at ISO S = EV100 + log₂(S ÷ 100). ISO 400 adds 2 and ISO 50 subtracts 1.

How do I find an equivalent exposure?

The new time is the old time times (new f-number ÷ old f-number)². From f/8 at 1/60 s to f/11 gives about 1/30 s.

Does the same exposure value give the same picture?

No. The aperture sets depth of field and the shutter time sets motion blur.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Education Tools