Saved

Press the star next to a tool's name to save it.

All my tools

Vapor Pressure Calculator

Use this vapor pressure calculator to find the vapour pressure of water at a temperature, the boiling point at a pressure or altitude, and to apply the Clausius-Clapeyron equation.

Restored your last values ·

Find the vapour pressure of water at a temperature, the boiling point of water at a pressure such as at altitude, or use the Clausius-Clapeyron equation to move a vapour pressure to another temperature or to find an enthalpy of vaporization.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you want and enter the values, then press Calculate.

See full result

A vapor pressure calculator gives the vapour pressure of water at a temperature, the boiling point of water at a given pressure, and uses the Clausius-Clapeyron equation to carry a vapour pressure from one temperature to another. It can show why water boils at a lower temperature on a mountain. Choose what you want and enter your numbers.

How to use the vapor pressure calculator

  1. Choose what you want and the pressure unit.
  2. Enter the temperature or the pressure, or the two points for the Clausius-Clapeyron equation.
  3. Press Calculate.

Vapour pressure

The vapour pressure of a liquid is the pressure of its vapour in equilibrium with the liquid at a given temperature. The page on vapor pressure lists water at 20 °C with a vapour pressure of about 2.3 kilopascals, which is 17.5 mmHg [1]. The same page warns that equations are usually poor when the vapour pressure is under 10 torr [1].

The Antoine equation

The Antoine equation is log₁₀ p = A − B/(C + T), with p in mmHg and T in °C, where A, B and C are constants for each substance [2]. For water the page gives A = 8.07131, B = 1730.63 and C = 233.426 from −20 °C to 100 °C, and A = 8.14019, B = 1810.94 and C = 244.485 from 99 °C to 374 °C [2]. At 20 °C it gives 17.47 mmHg, which is 2.33 kilopascals, and at 100 °C it gives 760.1 mmHg, or 101.34 kilopascals. The calculator changes constants at 100 °C and converts mmHg using 760 mmHg = 101.325 kPa [4].

The boiling point

Solving the Antoine equation for the temperature gives T = B/(A − log₁₀ p) − C [2]. At 760 mmHg the calculator returns 100.0 °C, matching the page's statement that water boils at 100 °C at one atmosphere, although a more exact figure is 99.97 °C [4]. At the IUPAC standard pressure of 100 kPa, the boiling point is 99.61 °C [4].

Altitude

Lower air pressure at altitude lowers the boiling point. The page says that water boils at 93.4 °C at 1,905 metres, and on Mount Everest, at about 34 kPa, at about 71 °C [4]. Enter 34 kPa and the calculator gives 72.1 °C, close to the page. At higher pressure the boiling point rises: at 200 kPa, as in a pressure cooker, water boils near 120 °C.

Clausius-Clapeyron

The Clausius-Clapeyron equation connects two vapour pressures and temperatures: ln(P₂/P₁) = −(L/R)(1/T₂ − 1/T₁), where L is the molar enthalpy of vaporization, assuming it is constant [3]. The page's example for water uses L = 40.7 kilojoules per mole [3]. Starting from 101.325 kPa at 100 °C, the pressure at 90 °C is about 70.1 kilopascals. Given two measured points, the calculator turns the equation round to give L, which for the points 101.325 kPa at 100 °C and 70.1 kPa at 90 °C is about 41.5 kilojoules per mole.

Choosing a mode

Use the Antoine mode when you want the vapour pressure of water. Use the boiling point mode for cooking at altitude or in a vacuum. Use the Clausius-Clapeyron modes for other liquids when you know the enthalpy of vaporization or two points on the curve. The gas constant is 8.3144598 J/(mol K).

Worked examples

Water at 25 °C has a vapour pressure of about 3.2 kilopascals by the Antoine equation. At 2,000 metres the boiling point is about 93 °C, so food takes longer to cook. A pressure cooker at 200 kPa cooks at about 120 °C. These are our own calculations from the equations and the page's data.

Why boiling depends on pressure

A liquid boils when its vapour pressure equals the pressure of the surroundings. At sea level the air pressure is about 101 kilopascals, so water boils at about 100 °C. On a mountain the air pressure is lower, so water reaches the boiling point sooner at a lower temperature. Inside a pressure cooker the pressure is higher, so the water must be hotter to boil, and the food cooks faster. The calculator shows this with the boiling point mode.

Cooking at altitude

Because water boils at a lower temperature at altitude, boiled foods take longer to cook, and recipes call for longer times or a pressure cooker. The effect is large enough to notice above about a thousand metres. The calculator gives the boiling point for any pressure that you enter, so you can see how much cooler the water is at your height. A weather report gives the pressure at your station, which you can type in directly.

Using Clausius-Clapeyron

For liquids other than water you need the enthalpy of vaporization, which is the energy needed to turn a mole of liquid into vapour. With one known vapour pressure and that enthalpy you can predict the vapour pressure at another temperature, and with two measured points you can estimate the enthalpy. The estimate assumes that the enthalpy does not change over the range, which is a fair approximation over a modest interval. Over a wide interval, use the Antoine equation with constants for your liquid.

Units

One atmosphere is 101.325 kilopascals and also 760 millimetres of mercury, and one bar is 100 kilopascals. The calculator converts the units for you and shows the result in the unit you chose, with the other common units beside it. Check the unit selector before you read a result, since a number in kilopascals looks very different from the same pressure in millimetres of mercury.

Limits of the equations

The constants in the Antoine equation are fitted to measured data over a stated range of temperature, and the fit is best in the middle of that range. Outside the range the equation can drift away from real values. The calculator refuses temperatures outside minus 20 to 374 degrees Celsius for water, because the constants do not cover them.

Common mistakes

  • Using Fahrenheit. Enter degrees Celsius.
  • Mixing pressure units. Check whether the unit is kPa, mmHg, atm or bar.
  • Using the water constants for other liquids. They apply to water only.
  • Trusting the result below 10 mmHg. The page says equations are poor there.

What next

Use this often? Add Vapor Pressu to your Home screen.

Frequently asked questions

What is a vapor pressure calculator?

A tool that finds the vapour pressure of water at a temperature, its boiling point at a pressure, and uses the Clausius-Clapeyron equation.

What is the Antoine equation?

log₁₀ p = A − B/(C + T). For water from −20 to 100 °C, A = 8.07131, B = 1730.63 and C = 233.426, with p in mmHg and T in °C.

At what temperature does water boil at 34 kPa?

About 72 °C. The page gives about 71 °C on Mount Everest.

What is the vapour pressure of water at 20 °C?

About 2.33 kilopascals, or 17.5 mmHg.

What does Clausius-Clapeyron give?

The vapour pressure at a second temperature from one known point and the enthalpy of vaporization, or the enthalpy from two points.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools