Saved

Press the star next to a tool's name to save it.

All my tools

Frames to Timecode Calculator

Use this timecode calculator to convert a frame count to SMPTE timecode and back at 23.976, 24, 25, 29.97 drop-frame, 29.97 non-drop and 30 fps.

Restored your last values ·

Enter a frame number to see its timecode, or enter a timecode to see its frame number. Choose the frame rate, and for 29.97 fps choose between drop-frame, which keeps the timecode close to the clock, and non-drop. The real elapsed time is shown too.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you want and the frame rate, enter the number, then press Calculate.

A timecode calculator converts between a frame count and an SMPTE timecode, such as 01:00:03;18. Choose the frame rate, including 29.97 frames per second with or without drop-frame, enter a frame number or a timecode, and you get the other one, together with the real time that has gone by on a clock. Editors, colourists and subtitlers use it to check durations, to cut to the right frame and to line up material. It runs in your browser.

How to use the timecode calculator

  1. Choose frames to timecode or timecode to frames.
  2. Choose the frame rate.
  3. Enter the frame number, or the timecode.
  4. Press Calculate.

The timecode format

The Wikipedia article on SMPTE timecode says that timecode is written HH:MM:SS:FF, with colons between hours, minutes, seconds and frames. Drop-frame timecode uses a semicolon, or a period, before the frames, as in HH:MM:SS;FF, so you can tell the two kinds apart.[1] The page lists these common frame rates: 23.98, also written 23.976, for North American HDTV, 24 for film, 25 for PAL, SECAM and DVB, 29.97 for NTSC, and 30.[1] The calculator offers those rates. At 24 frames per second, frame number 24 is the timecode 00:00:01:00, and at 25 frames per second, frame 100 is 00:00:04:00.

Why drop-frame exists

NTSC video runs at 29.97 frames per second, a little slower than 30. If you count 30 frames as one second of timecode, the timecode gets ahead of the clock. The page says that a nominal hour of 29.97 timecode is longer than an hour of wall-clock time by 3.6 seconds.[1] Our calculation agrees: 108,000 frames at 29.97 frames per second last 108,000 × 1001 ÷ 30,000 = 3,603.6 seconds. Drop-frame timecode fixes this by leaving out some numbers, never actual frames, so that the timecode matches the clock more closely.

The drop-frame rule

The article states the rule: drop-frame timecode skips frame numbers 0 and 1 of the first second of every minute, except when the number of minutes is divisible by ten. That makes the timecode skip 18 frame numbers every ten minutes, out of 18,000 at 30 frames per second.[1] After this, a drift of about one frame remains for every 9 hours and 15 minutes.[1] The page gives these examples: the frame after 01:08:59;29 is 01:09:00;02, and at a tenth minute, 01:09:59;29 is followed by 01:10:00;00, with nothing skipped.[1] The calculator follows the same rule, and it refuses a timecode such as 00:01:00;00, which does not exist in drop-frame.

How the conversion is done

The page does not give a formula for converting frames to drop-frame timecode, so the steps here are our own working from its rule. In every ten minutes there are 17,982 frame numbers, since 18,000 minus 18 are dropped. For the frame count, divide by 17,982 to find the whole ten-minute blocks and add 18 for each one. Then, in the remainder, add 2 more for each whole minute after the first, which has 1,800 frames, and the rest are 1,798. Then split the new count into hours, minutes, seconds and frames as at 30 frames per second. The reverse direction subtracts 2 for each minute that is not a tenth minute. The calculator has been tested to give back the same frame number for every frame that it converts.

Worked examples from the page

The article says that for 29.97 non-drop timecode of 01:00:00:00 the drop-frame timecode is 01:00:03;18, and that for non-drop 00:59:56:12 the drop-frame timecode is 01:00:00;00.[1] Check this in the calculator. Frame number 108,000 is 01:00:00:00 in non-drop and 01:00:03;18 in drop-frame. Frame 107,892 is 00:59:56:12 in non-drop and 01:00:00;00 in drop-frame, which is 59 minutes and 59.996 seconds on the clock, almost exactly an hour. This shows how well drop-frame keeps the time.

Real time versus timecode

The real elapsed time in the results shows how long the frames last on a clock. For 24 and 25 frames per second it is the same as the timecode, and 23.976 fps is 0.1 percent slower than 24, so 24 frames last 1.001 seconds. The 29.97 rate works the same way, with 1.001 seconds for 30 frames. Use this time to check the length of a programme against a broadcast slot, and use the timecode to find a frame in an edit.

Using timecode in practice

Editors use timecode to name exact points in a programme, such as the start of a scene, the position of a caption or the cue for an ad break. Subtitle and caption files, edit lists and delivery specifications all give times in timecode. When you work out a duration, convert both timecodes to frames, subtract, and convert the difference back. Doing the sum in frames avoids the mistakes that come from the odd counting of minutes and seconds, and the calculator does the drop-frame step for you.

Choosing the frame rate

Use the rate that the material was shot or delivered in. Film and many streaming files use 24 or 23.976 frames per second. Television in Europe uses 25, and in North America and Japan uses 29.97, usually with drop-frame for programmes that must fit a clock. If you are not sure, check the properties of the file or the project settings, because a wrong rate gives timecodes that drift away from the picture.

Common mistakes

  • Using non-drop for a clock time. At 29.97 it runs 3.6 seconds an hour long.
  • Typing a dropped frame. 00:01:00;00 and ;01 do not exist in drop-frame.
  • Mixing 23.976 and 24. They are different rates with the same timecode counting.
  • Forgetting the start value. Many programmes start at 01:00:00:00.

What next

Use this often? Add Frames to Ti to your Home screen.

Frequently asked questions

What is a timecode calculator?

A tool that converts a number of frames into SMPTE timecode, and timecode back into frames, at the common frame rates.

What is drop-frame timecode?

A way of counting 29.97 fps video that skips frame numbers 0 and 1 at the start of every minute, except every tenth minute, so that the timecode matches the clock.

How many frames are dropped?

18 frame numbers in every ten minutes, out of 18,000. No actual picture frames are removed.

Why does non-drop timecode drift?

29.97 fps is slower than 30, so counting 30 frames to a second makes the timecode run about 3.6 seconds long in an hour.

How do I tell drop-frame from non-drop?

Drop-frame uses a semicolon or period before the frames, as in 01:00:03;18. Non-drop uses colons throughout.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters