A video file size calculator estimates how big a video will be from its length and bit rate, or works out the bit rate you need to hit a target file size. Enter the duration, the video bit rate in Mbps or kbps and, if you like, the audio bit rate, and this video file size calculator shows the size in megabytes and gigabytes, along with how much data each minute takes. It's handy for planning storage, uploads, exports and compression settings.
How to use the video file size calculator
- Choose what to work out: the file size from a bit rate, or the bit rate for a target size.
- Enter the video's length in hours, minutes and seconds.
- Enter the video bit rate in Mbps or kbps, or the target file size in MB or GB.
- Add the audio bit rate in kbps if the video has sound.
- Press Calculate.
What bit rate means
Bit rate is the number of bits conveyed or processed per unit of time. It's measured in bits per second, usually with a prefix: 1 kbit/s is 1,000 bits per second, and 1 Mbit/s is 1,000 kbit/s, or one million bits per second. The abbreviations kbps and Mbps are often used for these. A video's bit rate is how much data each second of footage takes, so it sets the file size: the higher the bit rate, the bigger the file, and usually the better the picture.
The formula
File size in bytes = (video bit rate + audio bit rate) × duration in seconds ÷ 8
The division by 8 turns bits into bytes, because a byte is eight bits. To find the bit rate for a target size, the formula runs the other way: video bit rate = file size × 8 ÷ duration − audio bit rate. The same idea works for sound alone: Wikipedia's example is 80 minutes of CD audio, 44,100 samples per second at 16 bits and two channels, which comes to 846,720,000 bytes, about 847 MB.
Worked examples
- File size: a 10-minute video at 5 Mbps with 128 kbps audio has a total bit rate of 5,128 kbps. Over 600 seconds that's 5,128,000 × 600 ÷ 8 = 384,600,000 bytes, or 384.6 MB (about 366.8 MiB).
- A longer video: one hour at 8 Mbps with 192 kbps audio comes to about 3.69 GB.
- Bit rate for a target size: to fit a 5-minute video into 100 MB with 128 kbps audio, the total can be 100,000,000 × 8 ÷ 300 ≈ 2,667 kbps, which leaves about 2,539 kbps, or roughly 2.5 Mbps, for the video.
Typical video bit rates
| Video | Bit rate |
|---|---|
| YouTube 480p (H.264) | 1 Mbit/s |
| YouTube 720p (H.264) | 2.5 Mbit/s |
| YouTube 1080p (H.264) | 3–8 Mbit/s |
| YouTube 2160p, 4K (H.264) | 8–35 Mbit/s |
| DVD (MPEG-2) | Up to 9.8 Mbit/s |
| 1080p Blu-ray Disc | Up to 40 Mbit/s |
These figures come from Wikipedia's bit rate article. Your camera, phone or editing app shows the bit rate it uses in its export or recording settings, and that's the figure to enter here.
MB or MiB?
Storage makers and this calculator use decimal units: 1 MB is 1,000,000 bytes and 1 GB is 1,000,000,000 bytes. Some operating systems show sizes in binary units, where a mebibyte (MiB) is 1,048,576 bytes and a gibibyte (GiB) is 1,073,741,824 bytes, so the same file looks about 5% to 7% smaller there. The results table shows both, so you can match what your computer says.
Why real files differ a little
The calculation covers the audio and video streams. A real file also holds a container, such as MP4 or MKV, with headers, an index and sometimes subtitles or extra audio tracks, which add a little. Many encoders use a variable bit rate, spending more data on fast action and less on still scenes, so the average decides the size, and a short clip can be well above or below it. Treat the result as a close estimate, and leave a margin of a few percent when you need a file to stay under a hard limit.
Where this helps
- Upload limits: find the bit rate that keeps a video under an email, chat or platform size cap.
- Storage planning: estimate how many hours of footage fit on a memory card or drive.
- Exporting and compression: choose export settings for a target size.
- Streaming and recording: see how much data an hour of streaming or recording at a given quality uses.
Data per minute
The results also show how many megabytes each minute uses. Multiply it by the length of any other video at the same settings to estimate its size quickly, or divide your free storage by it to see how many minutes will fit.
Silent clips and audio-only files
Leave the audio box blank for a silent clip, such as screen recordings without narration or footage you plan to set to music later. For an audio-only recording, enter 0 as the video bit rate and the audio bit rate in kbps; the MP3 standard, for example, goes up to 320 kbit/s, which works out to 2.4 MB per minute.
Common mistakes
- Mixing up bits and bytes. Bit rates are in bits; file sizes are in bytes, eight times fewer.
- Mixing up Mbps and kbps. 5 Mbps is 5,000 kbps.
- Forgetting the audio. It's small next to HD video but adds up over long recordings.
- Expecting an exact size from a variable bit rate.
What next
Use this often? Add Video File S to your Home screen.
Frequently asked questions
How does the video file size calculator work?
It multiplies the total bit rate, video plus audio, by the duration in seconds and divides by 8 to get bytes, then shows MB and GB.
How big is a 10-minute video at 5 Mbps?
About 384.6 MB with 128 kbps audio, or 375 MB without sound.
How do I calculate the bit rate for a target file size?
Multiply the size in bytes by 8, divide by the duration in seconds, and subtract the audio bit rate.
Why does my computer show a smaller size?
Some systems use binary units, where 1 MiB is 1,048,576 bytes; this calculator shows both.
Is my information uploaded?
No. The video file size calculator works entirely in your browser.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.