A tablecloth size calculator tells you what size of tablecloth to buy for a table. Choose the shape, enter the size of the table and the drop you want, and the calculator gives the length and width, or the side or diameter, of the cloth. It uses the standard rule that the cloth is the table plus twice the drop in each direction.[1][2] It runs in your browser and nothing you enter is sent anywhere.
How to use the tablecloth size calculator
- Choose US or Metric units and the shape of the table.
- Enter the length and width of the table, or its side or diameter.
- Enter the drop, the length the cloth should hang over each edge.
- Press Find the tablecloth size.
What the drop is
The drop is the part of the tablecloth that hangs below the edge of the table. Linen makers describe a short drop of about 6 to 8 inches for casual use, 8 to 12 inches as a standard home drop, 12 to 15 inches as a banquet or event drop, and 28 to 30 inches as floor length.[1] Another guide calls a drop of about 15 inches lap length and a drop of about 30 inches floor length.[2] The calculator accepts any drop you enter, with a minimum of 2 inches as our own working, so choose the look you like.
The formulas
For a rectangular or an oval table, the cloth is the table plus twice the drop in both length and width.[1] For a square table, the side of the cloth is the side of the table plus twice the drop. For a round table, the diameter of the cloth is the diameter of the table plus twice the drop.[1][2] For a booth, where one side is against a wall, the length is the table length plus one drop and the width is the table width plus two drops. For a runner, the length is the table length plus twice the drop. The booth and runner rules are our own working from the same idea, since the sources above do not give them.
Worked examples
A first example is a rectangular table 6 feet long, which is 72 inches, and 36 inches wide, with a drop of 12 inches. The cloth is 72 plus 24 by 36 plus 24, which is 96 by 60 inches. A round table of 5 feet, which is 60 inches, with a drop of 6 inches needs a cloth of 72 inches across, and with a drop of 8 inches, it needs 76 inches. In the calculator you can enter the sizes in inches or in centimetres, and the result is in the same unit.
Standard sizes
Makers publish size charts for round cloths. One chart pairs a 60 inch round banquet table with a cloth of 84 to 90 inches for a 12 to 15 inch drop, and a cloth of 116 to 120 inches for a floor-length drop; a 72 inch table takes 96 to 102 inches or 128 to 132 inches.[1] Another lists round cloths of 72, 78, 84, 90, 102, 108, 114, 120 and 132 inches.[2] Sizes for square and rectangular cloths vary by maker, so use the calculator and then look for the nearest size. If your exact size is not sold, choose the next larger one, so that the drop is a little longer rather than shorter.[2]
Choosing the right look
A short drop looks tidy and is easy to keep clean, and suits everyday meals. A longer drop looks formal, and a floor-length cloth is used for buffets and weddings, where it hides the legs and the space under the table. Think about the chairs, too: a cloth that is too long may catch on the chairs and get pulled off the table, and a cloth that is too short can look like a mistake.
Booths
For a booth table, only three sides are free. It is wise to fix the cloth so that it does not slip, for example with a non-slip pad or clips, which is our own advice. Use the booth setting to get a length with one drop, and the same two-drop width as other tables.
Reading the result
The calculator shows the length and the width of the cloth for a rectangular, oval or booth table, the side for a square table, the diameter for a round table or the length for a runner. The numbers are the minimum size for the drop you chose. If you have a table with leaves or one that can be extended, enter the size you use most, and buy a cloth for that size, or measure it in its largest setting if you want it to fit all of the time.
Oval tables
The tool treats an oval table in the same way as a rectangular one, using its overall length and width, so the cloth is a rectangle or an oval of the same size as the result. An oval cloth fits the shape better, but a rectangular one will also work, and it will hang in folds at the ends. Choose the shape that you can find in the size you need.
Table runners
A runner runs along the length of the table, over a cloth or on the bare table. The tool gives its length as the length of the table plus twice the drop, and leaves the width to you. A runner is narrower than the table, and its width is a matter of taste.
Checking before you buy
Measure the table twice, and measure the drop you like on a cloth you already have, with a tape. If you are buying for a rental or a party, check the sizes the shop offers and choose the size closest to the result, rounding up. Check the fabric too, since some cloths shrink in the wash and may need a little more length than you think.
Common mistakes
- Forgetting to double the drop. The cloth hangs over both edges.
- Measuring the table top and not the table. Include any leaf that is in place.
- Buying the exact size. Choose the next larger size.[2]
- Using the radius of a round table. Enter the diameter.
What next
Use this often? Add Tablecloth S to your Home screen.
Frequently asked questions
What is a tablecloth size calculator?
A tool that gives the size of tablecloth to buy from the size and shape of the table and the drop.
How do you calculate the size of a tablecloth?
Table size plus two times the drop, in each direction. For a booth, the length gets one drop.
What size cloth for a 72 by 36 inch table with a 12 inch drop?
96 by 60 inches, from 72 plus 24 and 36 plus 24.
What size cloth for a 60 inch round table with an 8 inch drop?
76 inches across.
What is a standard drop?
Linen makers give about 8 to 12 inches for a standard home drop, 12 to 15 inches for banquets and 28 to 30 inches for floor length.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.