Saved

Press the star next to a tool's name to save it.

All my tools

Bathroom Mirror Size Calculator

Use this bathroom mirror size calculator to find the width, height or diameter of a mirror for a single, round or double vanity, in inches or centimetres.

Restored your last values ·

Choose the type of mirror, enter the width of your vanity and, for a rectangular or double mirror, the height of the vanity and of the ceiling. The calculator gives the width and height of the mirror, or the diameter of a round one.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the vanity width and, for a rectangular or double mirror, the vanity and ceiling heights, then press Find mirror size.

See full result

A bathroom mirror size calculator tells you how big a mirror should be for the vanity in your bathroom. Choose a rectangular, round or double-vanity mirror, enter the width of the vanity and, for a rectangular mirror, the height of the vanity and the ceiling, and the calculator gives the width and height to look for. It uses simple rules of thumb from bathroom design guides[1] and our own working. It runs in your browser and nothing you enter is sent anywhere.

How to use the bathroom mirror size calculator

  1. Choose US or Metric units.
  2. Choose the type of mirror: rectangular, circular or double.
  3. Enter the vanity width.
  4. For a rectangular or double mirror, enter the vanity height and the ceiling height, then press Find mirror size.

The width of a rectangular mirror

The calculator finds the width of a mirror over a single vanity by subtracting 4 inches from the width of the vanity. A bathroom design guide gives a range of 4 to 12 inches narrower than the vanity, and suggests 26 to 32 inches for a 36-inch vanity.[1] We show the 4-inch figure as the mirror width and the 6-inch figure as the narrowest width in our range, which is our own choice inside the guide's range. For a vanity 36 inches wide, the mirror is 32 inches wide, and 30 inches is the narrowest width we show.

The height of the mirror

The height is the ceiling height minus the vanity height, minus 12 inches. In our example the vanity is 36 inches high and the ceiling is 96 inches high, so the mirror is 96 minus 36 minus 12, which is 48 inches. The 12 inches is the gap that the formula leaves for the backsplash above the vanity and the space under the ceiling. A design guide says the bottom edge should sit 5 to 10 inches above the countertop, or above the backsplash if there is one.[1] How the 12 inches is shared with the gap under the ceiling is our own working.

Round mirrors

For a round mirror, the calculator subtracts 4 inches from the width of the vanity to get the diameter, which is our own working. A 30-inch vanity takes a mirror 26 inches across. Hexagonal and star-shaped mirrors can be treated as round, using the measured diameter, and an oval mirror with its longer side upright can be treated as a rectangle.

Double vanities

For a double vanity, you can use two mirrors, each centered over its own sink, or one wide mirror that spans both.[1] The calculator takes the width of the mirror span as the vanity width minus 8 inches, and the height is found in the same way as for a single vanity. That leaves a mirror about 4 inches in from each edge of the vanity, which is our own working. The calculator gives the total width, so for a vanity 60 inches wide the mirror span is 52 inches. If you use two separate mirrors, split that span between them, after leaving the gap you want.

Other things to think about

A few practical points apply. A mirror that is too short may cut off the head of a tall person, so check the height of the people who use it. Guides often center the mirror near 60 to 65 inches off the finished floor, which is eye level for an average adult.[1] You also need a light source above the level of the mirror. If there is a cupboard above the vanity, you can fix the mirror on the doors. A tall mirror can make a room feel more open. Measure twice, and tape the planned size on the wall before you buy.

Reading the result

The calculator shows the width and the height of the mirror, and for a rectangular one the narrowest width in the range of 4 to 6 inches narrower than the vanity. A mirror between those two widths is in the range we suggest. For a round mirror, it shows the diameter alone, since there is no separate height. If the calculator reports an error about the ceiling, the room is too low for the formula, and you should choose a shorter mirror by hand.

Choosing the shape

A rectangular mirror suits most single vanities and fills the wall above them. A round mirror softens a room with many straight lines, and it is often used above a narrower vanity. A double vanity looks best with a wide rectangular mirror or with two matching mirrors, one above each basin. Whatever the shape, hang it so that its centre sits at roughly the eye level of the people who use it most, and check that the taps do not reach the glass.

Before you buy

Cut a piece of paper or cardboard to the size the calculator gives, and tape it to the wall where the mirror will go. Stand in front of it, step back and look at it from the door. Check that it lines up with the lights, the cupboards and any tiles, and that it does not look too small or too big for the wall. Adjust the size by an inch or two if you like, and then order the mirror that is closest to your paper template.

Common mistakes

  • Measuring the whole wall. The width comes from the vanity, not from the wall.
  • Mixing units. Choose inches or centimetres first.
  • Forgetting the lighting. Lights need space above the mirror.
  • Taking the result as a fixed rule. It is a guide, and your taste and layout come first.

What next

Use this often? Add Bathroom Mir to your Home screen.

Frequently asked questions

What is a bathroom mirror size calculator?

A tool that suggests the width and height of a bathroom mirror from the size of the vanity and the ceiling.

How wide should a mirror over a vanity be?

The calculator subtracts 4 inches from the vanity width. A bathroom design guide gives 4 to 12 inches narrower than the vanity as the usual range.

How high should the mirror be?

Ceiling height minus the vanity height, minus 12 inches. A 36-inch vanity under a 96-inch ceiling gives 48 inches.

What size round mirror for a 30-inch vanity?

26 inches across, which is the vanity width minus 4 inches.

What size mirror for a double vanity?

The vanity width minus 8 inches, with the height found as for a single vanity.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools