Saved

Press the star next to a tool's name to save it.

All my tools

Lighting Calculator

Use this lighting calculator to find the lumens a room needs from its area and target lux, and the number of bulbs of a given brightness.

Restored your last values ·

Lux is the light that reaches a surface, in lumens per square metre. Enter the room area and the lux you want. Add the lumens of one bulb to see how many bulbs you need.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter a value and press Calculate.

See full result

A lighting calculator tells you how many lumens a room needs to reach the brightness you want. Enter the area of the room and a target in lux, and the calculator multiplies them to give the lumens required. Add the lumens of the bulb you plan to use, and it shows how many bulbs you need.

Lumens and lux

Lumens measure the total light a source gives out, and lux measures how much of that light lands on a surface. Wikipedia defines lux as equal to one lumen per square metre: a flux of 1,000 lumens spread evenly over an area of one square metre lights it up with an illuminance of 1,000 lux. The same 1,000 lumens spread over ten square metres gives only 100 lux. This is why a big room needs more lumens than a small one for the same brightness.

The lighting formula

Lumens needed = area (m²) × target illuminance (lux)
Bulbs needed = lumens needed ÷ lumens per bulb, rounded up

If you enter the area in square feet, the calculator converts it to square metres first, using 0.0929 square metres to the square foot. It also shows the lumens needed per square foot, which is convenient when you compare with advice in imperial units.

How to use the lighting calculator

  1. Enter the area of the room in square metres or square feet. For a rectangle, multiply the length by the width.
  2. Enter the target brightness in lux. The table below gives some guide values.
  3. Optionally enter the lumens of one bulb to see the number of bulbs needed.
  4. Press Calculate to see the result.

How bright should a room be?

SettingIlluminance
Office lighting320–500 lux
Office building hallway80 lux
Family living room lights (Australia, 1998)50 lux

These values come from the table of illuminance examples in Wikipedia's article on the lux. The same article notes that an illuminance of 500 lux might be possible in a home kitchen with a single fluorescent fixture with an output of 12,000 lumens. That is consistent with this calculator: 12,000 lumens divided by 500 lux gives 24 square metres. Treat these as examples and choose a target that suits what you do in the room.

Worked examples

  • A 20 m² office at 500 lux needs 20 × 500 = 10,000 lumens. With 800-lumen bulbs, that is 12.5, so 13 bulbs.
  • A 215 ft² living room at 150 lux: 215 ft² is 19.97 m², so you need about 2,996 lumens.
  • A 6 m² hallway at 80 lux needs 480 lumens, about one 450-lumen bulb or a little more.

Watts do not measure brightness

ENERGY STAR explains that brightness is a description of light output, which is measured in lumens, not watts. Watts measure the power a bulb uses. Its table of minimum lumens for old incandescent bulbs lists 450 lumens for 40 watts, 800 for 60 watts, 1,100 for 75 watts, 1,600 for 100 watts and 2,600 for 150 watts. To save energy, find the bulbs with the lumens you need, then choose the one with the lowest wattage. To compare a bulb with an old one see the lumens to watts calculator.

Layers of light

One result is a starting point, since the best lighting uses layers: general light for the whole room, task light where you read or cook, and accent light for decoration. Several smaller sources are often better than one large source because they reduce shadows. Use the calculator for the total and divide it among the fittings you plan to use. A dimmer lets you change the brightness for different uses.

Savings

Once you know the lumens you need, compare bulbs by their efficiency, which is lumens per watt. A more efficient bulb gives the same light for less power. The LED bulb savings calculator shows how much you save by switching.

Using lumens per square foot

In the United States, advice on lighting is often given as lumens per square foot. The calculator shows this figure in the table. For example, 500 lux is about 46 lumens per square foot, because one square foot is 0.0929 square metres. A room of 200 square feet at that level needs about 9,300 lumens. Comparing this number with the lumens printed on bulb packaging lets you choose the right number of bulbs.

Choosing a target for your room

The right target depends on what you do in the room. A hallway or a bedroom needs less light than a kitchen counter or a desk where you read or work. A good approach is to use a lower level for general light and add task lights where you need more, rather than lighting the whole room to the highest level. Dimmers and several fittings give you the freedom to change the light as the day goes on.

Common mistakes

  • Confusing lumens and lux. Lumens are the output of the source, and lux is the light on a surface.
  • Using watts to choose a bulb. Compare lumens.
  • Ignoring losses. Dark walls and shades absorb light, so allow extra.
  • Using one target for every room. A hallway needs less than a workshop.

What next

Use this often? Add Lighting to your Home screen.

Frequently asked questions

How does a lighting calculator work?

It multiplies the room area in square metres by the target illuminance in lux to give the lumens needed, then divides by the lumens per bulb for the number of bulbs.

How many lumens do I need for a room?

Multiply the area in square metres by the lux you want. A 20 m² office at 500 lux needs 10,000 lumens.

What is lux?

Wikipedia defines it as one lumen per square metre. A flux of 1,000 lumens spread over one square metre lights it to 1,000 lux.

What is a good lux level for an office?

Wikipedia's table of illuminance examples gives 320 to 500 lux for office lighting.

Are lumens or watts a better way to choose a bulb?

Lumens. ENERGY STAR says brightness is measured in lumens, not watts, so find bulbs with the lumens you need and choose the lowest wattage.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools