Saved

Press the star next to a tool's name to save it.

All my tools

Swimming Time Calculator

Use this swimming time calculator to get your finish time from a pace per 100 yards or metres, or a pace from a finish time, with lap times, splits and average speed.

Restored your last values ·

min
s
min
s

Choose yards or metres. Enter the swim distance, then either your pace per 100 or your finish time. Add the pool length to see the time for each length. You get the finish time or pace, the splits and the same pace in the other unit.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the swim distance and either a pace per 100 or a finish time, then press Calculate.

See full result

A swimming time calculator works out your finish time from your pace per 100 yards or metres, or your pace from a finish time. It also gives the time for each 50, each 25 and each length of the pool, the time at every 100, your average speed, and the same pace in the other unit.

How to use the swimming time calculator

  1. Choose yards or metres.
  2. Enter the swim distance.
  3. Enter your pace per 100, or choose finish time and enter that.
  4. Add the pool length if you want lap times, then press Calculate.

Pace per 100

Swimming pace is usually given as the time for 100 yards or 100 metres. The finish time is the pace times the distance divided by 100, and the pace is the finish time times 100 divided by the distance. For 500 yards at 1:30 per 100, that is 90 seconds times 5, or 7:30. This is simple arithmetic and our own working, and it assumes the same effort throughout the swim.

Pool lengths

Competitive pools come in three common types: short course yards (25 yards), short course metres (25 metres) and long course metres (50 metres) [2]. A 25 metre pool is 27.34 yards, and a 25 yard pool is 22.86 metres. Enter the length of your pool, and the calculator gives the time of each length and the number of lengths in all.

Yards and metres

Since 1959 the yard has been defined as exactly 0.9144 metres, a change that brought the U.S. yard into line with the yard used in other countries, and it equals 3 feet or 36 inches [1]. The calculator uses that value to show the distance and pace in the other unit. Dividing 25 metres by 0.9144 gives 27.34 yards, and 25 yards times 0.9144 gives 22.86 metres.

A yards example

A swimmer holds 1:30 per 100 yards for 500 yards. The finish time is 7:30. In a 25 yard pool each length takes 22.5 seconds, there are 20 lengths, each 50 yards takes 45 seconds, and the clock reads 1:30, 3:00, 4:30, 6:00 and 7:30 at each 100. The distance is 457.2 metres, and the same pace is 1:38.4 per 100 metres, from 90 ÷ 0.9144. The average speed is about 1.02 metres per second.

A metres example

For 400 metres at 1:30 per 100 metres, the finish time is 6:00. In a 50 metre pool each length takes 45 seconds and there are 8 lengths. The same swim is 437.45 yards, and the pace per 100 yards is 1:22.3, from 90 × 0.9144. The average speed is 400 ÷ 360, about 1.11 metres per second, or 4 kilometres per hour. These are our own example figures.

From a finish time to a pace

Choose the finish time option, and enter the minutes and seconds. For 400 metres in 6:00, the pace is 360 ÷ 400 × 100, which is 1:30 per 100 metres. This is useful to find the pace needed for a target, such as 20:00 for 1,500 metres, which is 1:20 per 100. The splits then show the time at each 100 on the way.

Even pace and real swims

The calculator assumes an even pace. The number of turns in a race can help or hurt a swimmer, which is why short course and long course records are kept separate [3]. The effect is not modelled here. In practice you push off the wall after each turn, and you tire towards the end. Use the even pace as a target, and expect a real swim to vary in the second half.

Converting times between pools

This calculator changes the unit of distance and pace only. It does not convert times between pool types, because the turns and the pool length change a real time in ways that a simple formula does not capture.

Training and open water

Pace per 100 is also used to plan sets in training: for example, 8 × 50 on a 1:00 interval at a pace of 45 seconds. The splits and the lap time help you to pace each repetition. Open water has no walls or fixed lengths, so use a longer distance and the average speed as a guide. Currents and waves will change your time, so a pool pace is only a rough guide.

Using the calculator

Choose the unit that matches your pool and your goals, enter the distance, and fill in either the pace or the finish time. Add the pool length for lap times. Read the finish time, then compare the splits with a pace clock on the wall. Try a few paces to see how a few seconds per 100 change the finish time of a long swim. Check the unit before you compare your time with someone else's.

Setting a target pace

To plan a goal swim, start from the finish time that you want and work backwards. A target of 30 minutes for 1,500 metres needs 1:20 per 100 metres, and the splits show the clock at each 100, so you can check yourself against a pace clock on the wall. If the pace feels too hard in training, lengthen the goal time a little and try again. Small, steady changes of a second or two per 100 add up over a long distance, and the calculator shows the effect at once.

Reading the average speed

Average speed is the distance in metres divided by the time in seconds, and the tool also gives it in kilometres per hour. It lets you compare a swim with a run or a ride, for example in a triathlon plan, where all three legs are expressed as a speed. The value is our own working from the distance and the time, and it assumes that the distance is measured in a straight line along the lane.

Common mistakes

  • Mixing yards and metres. A 100 yard pace is faster than a 100 metre pace.
  • Using a pool length that is not a whole fraction of the distance. The lengths are shown as a fraction.
  • Expecting turns to be included. Even pace only.
  • Entering the finish time in hours. Use minutes and seconds.

What next

Use this often? Add Swimming Tim to your Home screen.

Frequently asked questions

What is a swimming time calculator?

A tool that turns a pace per 100 into a finish time, or a finish time into a pace, with splits and lap times.

How do you work out swim pace?

Divide the finish time by the distance and multiply by 100. 400 metres in 6:00 is 1:30 per 100 metres.

How many metres is a yard?

Exactly 0.9144 metres. A 25 yard pool is 22.86 metres.

Does it convert a short course time to long course?

No. It changes the unit of distance and pace only, not times between pool types.

Why are my real splits different?

Turns, starts and tiredness change a real swim. The tool assumes an even pace.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Health & Fitness Tools