Saved

Press the star next to a tool's name to save it.

All my tools

Triathlon Calculator

Use this triathlon calculator to predict your sprint, Olympic, 70.3 or full-distance finish time from your swim pace, bike speed, run pace and transition times.

Restored your last values ·

Choose the race format and enter your swim pace per 100 yards (US) or 100 metres (metric), your bike speed, your run pace per mile or kilometre, and your two transition times. The calculator adds up the five parts of the race.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose a race, enter your paces and press Find finish time.

See full result

A triathlon calculator predicts your finish time in a triathlon from your swim, bike and run paces and your transition times. Choose the race format, enter how fast you swim, ride and run, and the calculator gives the time for each part and your total. It runs in your browser and nothing you enter is sent anywhere.

The standard race formats

The Wikipedia page lists the standard formats in a table. A sprint is a 750 m swim, a 20 km bike ride and a 5 km run, which the page notes is half the Olympic distance. The Olympic, or standard, distance is a 1.5 km swim, a 40 km ride and a 10 km run. The 70.3 format, also called the half-ironman, is a 1.9 km swim, a 90 km ride and a 21.1 km run. The 140.6, or full Ironman distance, is a 3.9 km swim, a 181 km ride and a 42.2 km run. The calculator uses these distances.

How to use the triathlon calculator

  1. Choose US or Metric and the race format.
  2. Enter your swim pace per 100 yards or 100 metres.
  3. Enter your bike speed and your run pace per mile or kilometre.
  4. Enter your T1 and T2 times in minutes, then press Find finish time.

Transitions count

The page explains that the first transition, T1, is between the swimming and bicycle segments, and the second, T2, is between the bicycle and running segments. It says the time spent in transition is a timed segment and contributes towards the overall finishing time. Transition is commonly described as the fourth discipline. That is why the calculator asks for both transition times and adds them to the total. Leave them at zero if you want a figure for the three sports alone.

How the time is built up

The page says triathlons are timed in five sequential sections: the swim, T1, the cycling, T2 and the run. The calculator does the same sum. The swim time is the distance in units of 100 yards or 100 metres times your pace per unit. The bike time is the distance divided by your speed. The run time is the distance times your pace. The finish time is the five parts added together.

Worked example

Take a sprint triathlon in US units. A swim pace of 2:00 per 100 yards over 750 metres, which is about 820 yards, gives 16 minutes 24 seconds. A bike speed of 18 mph over 20 km, which is 12.4 miles, gives 41 minutes 25 seconds. A run pace of 9:00 per mile over 5 km, which is 3.1 miles, gives 27 minutes 58 seconds. With 2 minutes for T1 and 1 minute for T2, the finish time is 1 hour 28 minutes 47 seconds.

Choosing realistic paces

Use paces from your training, not your best single effort. Race conditions differ from training, so if you are not sure, use a slightly slower pace and a longer transition time.

Using the calculator to plan

Try different paces to see where the time is. In the example above, the bike makes up nearly half of the sprint, so a 1 mph faster ride saves more time than a small change in the swim. Compare formats too: the same paces over the Olympic distance, then the 70.3, show how much time the longer races take, though you would also slow down over the longer distance, and the calculator does not do this for you.

Reading the result

The calculator shows the finish time and the time for each of the five sections, with the distances for the race you chose. In US units the distances are shown in miles, with the swim at about 0.47 miles for a sprint. Check the section times against your training to see whether each one looks realistic. If one looks too fast or too slow, change the pace or speed and run it again.

Pace and speed units

Swim pace is the time for a short standard length: 100 yards in US units and 100 metres in metric. Bike speed is in miles per hour or kilometres per hour. Run pace is the time per mile or per kilometre. The calculator converts the race distances for you, so you can use the units you know. Note that 100 yards is a little shorter than 100 metres, so a swim pace of 2:00 per 100 yards is a little slower, per metre, than 2:00 per 100 metres.

Splits for race day

The section times are useful on race day. Write the swim, bike and run targets on a card or your watch notes, and check your progress as you go. If you reach the end of the bike ten minutes behind, you will know that you need a faster run to hit your goal, or a new goal. Having the section targets also helps you avoid starting the swim or the bike too fast, which is a common way to run out of energy later in the race.

Practising transitions

Transitions are part of the race, so they are worth practising. T1 includes leaving the water, taking off the wetsuit if you wear one and putting on your helmet and shoes. T2 means racking the bike and changing into your running shoes. Time a few practice runs of each transition and enter your own times in the calculator to see how they add up over a race.

Common mistakes

  • Using race pace for every part of a long race. Pace falls as the race goes on.
  • Mixing up units. Swim pace is per 100 yards (US) or per 100 metres.
  • Forgetting transitions. They count towards the finish time.
  • Using a pool swim pace in open water. Open water is usually slower.

What next

Use this often? Add Triathlon to your Home screen.

Frequently asked questions

What is a triathlon calculator?

A tool that predicts a triathlon finish time from your swim pace, bike speed, run pace and transition times.

What are the standard triathlon distances?

Sprint 750 m/20 km/5 km, Olympic 1.5 km/40 km/10 km, 70.3 1.9 km/90 km/21.1 km and 140.6 3.9 km/181 km/42.2 km.

Do transitions count in the finish time?

Yes. Wikipedia says the time spent in transition is a timed segment and contributes to the overall finishing time.

How is a triathlon finish time calculated?

Swim time plus T1, bike time, T2 and run time.

Why is my real race slower than the calculator?

Open water, hills, wind, heat and fatigue slow most people compared with training paces.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters