Saved

Press the star next to a tool's name to save it.

All my tools

Stokes Law Calculator

Use this Stokes law calculator to find the terminal settling velocity of a small sphere in a viscous fluid, with the drag force and a Reynolds number check.

Restored your last values ·

mm
Pa·s
kg/m³
kg/m³
m/s²

Enter the sphere diameter in millimetres, the densities of the sphere and the fluid in kilograms per cubic metre, and the fluid viscosity in pascal seconds. You get the terminal settling velocity and a check that Stokes law applies.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the diameter, the two densities and the viscosity, then press Calculate.

See full result

A Stokes law calculator gives the terminal velocity of a small sphere falling, or rising, through a viscous fluid. Enter the diameter, the densities of the particle and the fluid, and the viscosity. It returns the settling speed, the drag force and a Reynolds number check on whether the law applies.

How to use the Stokes law calculator

  1. Enter the particle diameter in millimetres.
  2. Enter the particle density and the fluid density in kg/m³.
  3. Enter the viscosity in Pa·s and, if you wish, g.
  4. Press Calculate and read the Reynolds number note.

What Stokes law says

Stokes law gives the drag on a small sphere moving slowly through a viscous fluid. The Wikipedia page writes the force as F = −6π μ R v, where R is the radius of the sphere, μ is the dynamic viscosity and v is the velocity of the body, and the minus sign means the drag opposes the motion [1]. The drag grows in direct proportion to the speed, which is why a falling particle reaches a steady speed.

The terminal velocity formula

At terminal velocity the drag balances the weight minus the buoyancy. The Wikipedia page gives the terminal velocity as v = (2/9) (ρp − ρf) g R² ÷ μ, with R the radius [1]. With R = d ÷ 2 the factor 2/9 divided by 4 is 1/18, so v = g d² (ρp − ρf) ÷ (18 μ), with d the particle diameter (our own algebra). This tool uses the diameter form.

What each input means

The diameter d is entered in millimetres and converted to metres. The densities ρp and ρf are in kilograms per cubic metre, and the dynamic viscosity μ is in pascal seconds. The page lists g as the gravitational field strength [1]; if you leave it blank the tool uses 9.80665 m/s², the standard value for Earth. You can type another value, such as 1.62 for the Moon, to see how the speed scales.

Sinking and rising

The sign of the density difference decides the direction. If the particle is denser than the fluid, the formula gives a positive speed and the particle sinks, as sand does in water. If it is lighter, such as an oil droplet in water or a bubble, the speed is negative and the particle rises, and the tool says so. If the two densities are equal, nothing settles and the tool reports no settling, since the net force is zero.

A worked example

As a worked example, take a 1 cm aluminium sphere, density 2,710 kg/m³, in oil of density 850 kg/m³ and viscosity 0.38 Pa·s, with g = 9.81 m/s². Then g d² = 0.000981, the density difference is 1,860, and v = 0.000981 × 1,860 ÷ (18 × 0.38) = 0.26676 m/s, or about 0.27 m/s. The tool shows 0.26676 m/s and the matching drag force of about 9.55 millinewtons.

The Reynolds number check

Stokes law needs a slow, smooth flow. The Wikipedia page lists no inertial effects, zero Reynolds number, as an assumption, and says that for an error of 10% the velocity must be limited to values giving Re below 1 [1]. The tool therefore computes Re = ρf v d ÷ μ, which is the usual definition and our own working, and tells you whether it is below 1. In the example above it is about 6, so the law overestimates the speed there.

Drag force at terminal speed

The tool also gives the drag force 6π μ R v at the terminal speed. At that point it equals the weight of the particle minus the buoyant force of the displaced fluid, so you can use it as a cross-check on the other inputs. For the aluminium example, the drag is about 9.55 × 10⁻³ N. We derived this from the formula in the first section [1], with the speed from the second.

Settling of fine particles

The formula explains why small particles settle slowly. The speed varies with the square of the diameter, so halving the diameter makes a particle settle four times more slowly. This matters for silt in water, dust in air, cream in milk and the sedimentation in a centrifuge. The tool lets you try different diameters quickly. Keep in mind that clouds of particles hinder one another, so a real suspension settles more slowly than a single grain.

Units and conversions

Everything is converted to SI units before the calculation: millimetres to metres, and the result is given in metres per second with the kilometres per hour next to it. Viscosities are often quoted in centipoise, where 1 cP equals 0.001 Pa·s; convert before entering. Densities in g/cm³ become kg/m³ when you multiply by 1,000. The viscosity converter on this site can help with the conversion of viscosity units.

Limits of the model

The law is for a rigid sphere in an unbounded fluid, with no other forces. Walls, other particles, non-spherical shapes and turbulence all change the real speed. Use the result as an estimate, check the Reynolds number, and for fast or large objects use a drag coefficient method instead.

Common mistakes

  • Using the radius instead of the diameter. The inputs ask for the diameter.
  • Entering viscosity in centipoise. Convert to Pa·s first.
  • Ignoring the Reynolds number. Above 1 the speed is overestimated.
  • Mixing g/cm³ with kg/m³. Densities must both be in kg/m³.

What next

Use this often? Add Stokes Law to your Home screen.

Frequently asked questions

What is a Stokes law calculator?

A tool that finds the terminal velocity of a small sphere in a viscous fluid from its size, the densities and the viscosity.

What is the Stokes law formula for velocity?

v = g d² (ρp − ρf) ÷ (18 μ), with d the diameter of the sphere.

When is Stokes law valid?

For slow, smooth flow, roughly when the Reynolds number is below 1.

Why does a bubble rise?

It is lighter than the fluid, so the density difference is negative and the velocity points upward.

What is the Stokes drag force?

F = 6π μ R v, which acts against the motion of the sphere.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools