This spiral staircase calculator works out the risers, rise height, treads and tread size for a spiral stair, and checks the layout against the spiral stair rules in the 2021 International Residential Code (IRC). Enter the floor-to-floor height, how far the stair turns, its diameter and the center column, and the spiral staircase calculator does the rest.
How to use the spiral staircase calculator
- Choose US or metric units. US (inches) is the default.
- Enter the floor-to-floor height, from finished floor to finished floor.
- Enter the total turn, such as 270°, 360° or more.
- Enter the stair diameter and the center column diameter, then press Calculate.
IRC rules for spiral stairs
IRC section R311.7.10.1 sets these requirements for spiral stairways:
- clear width at and below the handrails of not less than 26 inches
- a walkline radius of not more than 24½ inches
- treads at least 6¾ inches deep at the walkline, all identical
- a rise of not more than 9½ inches
- headroom of not less than 6 feet 6 inches
Section R311.7.4 places the walkline 12 inches from the inside of the turn, so for a spiral stair the calculator measures it 12 inches out from the edge of the center column.
How the calculator works
It finds the fewest risers that keep the rise at or under 9½ inches: the height divided by 9.5, rounded up. The rise is then the height divided by the number of risers. There's one fewer tread than risers, because the top floor forms the last step. The turn is shared evenly between the treads, and the tread depth at the walkline is the arc length along the walkline for that share of the turn. The rise per full turn, the height you gain going once around, is the clearance under the stair above before subtracting the tread thickness.
Worked example
A stair rises 108 inches (9 feet) in a full 360° turn, with a 60-inch diameter and a 4-inch center column. 108 ÷ 9.5 = 11.4, so it needs 12 risers of 9 inches and 11 treads, each turning about 32.7°. The walkline is 2 + 12 = 14 inches from the center, under the 24½-inch limit, and the tread there is 2π × 14 × 32.7 ÷ 360 = about 8.0 inches deep, more than the 6¾-inch minimum. The clear width is 30 − 2 = 28 inches, and each full turn rises 99 inches, enough headroom before the tread thickness.
Reading the results
The big line gives the number of risers and the rise height. The line below says whether the layout meets the checks. The table shows the number of treads, the turn per tread, the tread depth at the walkline, the walkline radius, the clear width and the rise per full turn, each with an OK or a warning.
Adjusting a layout
The checks pull against each other. If the tread is too shallow at the walkline, give the stair more total turn, so each tread takes a bigger slice of the circle, or use a slightly larger column so the walkline moves outward. But more turn also means the stair climbs less in each full revolution, which lowers the headroom where it passes under itself: in the example, 11 treads over 360° rise 99 inches per turn, while the same 11 treads spread over 450° rise only about 79 inches per turn. The clear width depends on the diameter: a 26-inch clear width needs a radius of at least 26 inches plus the column radius.
Turn and floor opening
A spiral stair is often set in a square or round opening in the floor above, so the total turn affects where you step off at the top. A 360° stair arrives facing the same way you started, a 270° stair arrives at a right angle, and turns between suit different floor plans. Choose the turn that puts the top landing where you need it, then check the tread depth and headroom in the calculator.
Metric spiral stairs
Choose metric to enter the height, diameter and column in millimeters. The calculator converts to inches to apply the IRC limits, which are given in both units: a rise of 241 mm, a tread of 171 mm at the walkline, a walkline radius of 622 mm, a clear width of 660 mm and headroom of 1,982 mm.
Why spiral stairs have their own rules
Ordinary stairs in the IRC need risers of 7¾ inches or less and treads of at least 10 inches. A spiral stair can't meet those limits in a small footprint, so the code allows taller risers and shallower treads in exchange for the compact layout, as long as the walkline, width and headroom rules are met. That's why spiral stairs are usually used as a second stair or to reach a loft rather than as the main stair in a house.
Common mistakes
- Measuring to the subfloor. Use finished floor to finished floor.
- Ignoring tread thickness. It reduces headroom.
- Forgetting the handrail. It reduces the clear width.
- Uneven treads. The IRC requires identical treads.
Tips
- Check the floor opening size with the stair maker.
- Confirm your local code before ordering a kit.
- Keep risers equal for a safe, comfortable climb.
What next
Use this often? Add Spiral Stair to your Home screen.
Frequently asked questions
How does a spiral staircase calculator work?
It finds the fewest risers of 9½ inches or less, shares the turn between the treads and checks tread depth, walkline radius, width and headroom against IRC R311.7.10.1.
What is the maximum rise for a spiral staircase?
The IRC allows up to 9½ inches.
How deep must spiral stair treads be?
At least 6¾ inches at the walkline, which is 12 inches from the inside of the turn.
How wide must a spiral staircase be?
At least 26 inches of clear width at and below the handrails.
What headroom does a spiral staircase need?
At least 6 feet 6 inches.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.