Saved

Press the star next to a tool's name to save it.

All my tools

Speaker Box Calculator

Use this speaker box calculator to find a sealed box volume from Qts, Fs, Vas and Qtc, the length of a port, or the net air volume of a box from its size.

Restored your last values ·

Hz
Hz

Choose sealed box, port length or net volume. For a sealed box, enter the driver's Qts, Fs and Vas and a target Qtc. For a port, enter the box volume, the port size and the tuning. For the net volume, enter the outside size, the board thickness and the volumes of the driver and port.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what to calculate, enter the values and press Calculate.

See full result

A speaker box calculator helps you design an enclosure. It finds the volume of a sealed box from a driver's Thiele-Small parameters, the length of a port for a ported box, and the net air volume of a box from its outside size, the board thickness and the driver and port volumes.

How to use the speaker box calculator

  1. Choose US or metric units and the calculation: sealed box, port length or net volume.
  2. For a sealed box, enter Qts, Fs, Vas and a target Qtc.
  3. For a port, enter the number, diameter, box volume and tuning.
  4. For the net volume, enter the outside size, thickness and the driver and port volumes.

Sealed box: the formulas

For a sealed box, let a be the driver's Vas divided by the box volume Vb. Vas and Qts are standard Thiele/Small parameters of the driver [3]. The tool uses the standard sealed-box relations: the system Qtc is Qts × √(a + 1), and the box resonance is Fc = Fs × √(a + 1). Solving the first equation for the volume gives Vb = Vas ÷ ((Qtc ÷ Qts)² − 1). This rearrangement is our own algebra, and it works only if Qtc is greater than Qts. If it is not, the calculator tells you.

Target Qtc values

The tool offers the usual target values for Qtc: 0.500 for a critically damped box, 0.577 for Bessel, 0.707 for maximally flat, and 0.900 and 1.000. These are the tool's own presets. If you leave the target blank, the calculator uses 0.707. It names the target if your value is one of those five. A lower Qtc needs a larger box, which you can see from the formula, and a higher Qtc gives a smaller box with a higher resonance.

A sealed box example

For a driver with Qts 0.38, Fs 35 Hz and Vas 35 litres, a target Qtc of 0.707 gives (0.707 ÷ 0.38)² = 3.4614. The box is Vb = 35 ÷ 2.4614 = 14.22 litres, and Fc is 35 × √3.4614 = 65.12 Hz. These are the tool's own worked figures. A target of 0.500 gives 47.9 litres and 46.1 Hz, and 0.577 gives 26.8 litres and 53.1 Hz.

Port length formula

For a ported box, the tool gives the length of the port as L = (23,562.5 × D² × N) ÷ (V × F²) − k × D. Here L and D are in centimetres, N is the number of ports, V is the box volume in litres and F is the tuning frequency in hertz. The formula is a form of the Helmholtz resonance relation, f = (v ÷ 2π) × √(A ÷ (V₀ L_eq)), where v is the speed of sound, A the area of the port, V₀ the volume of the box and L_eq the equivalent length of the port [1]. The calculator converts your inches and cubic feet to these units first.

End correction

The k in the formula is the end correction, and the tool offers three values. It is 0.850 when both ends of the port are flanged, 0.732 when one end is flanged, and 0.614 when both ends are free. Wikipedia gives an end correction of 0.6133 times the radius for an ideal cylindrical tube [2]; two free ends make 2 × 0.6133 r, which is 0.614 times the diameter, and that is our own check of the third value. The flanged values are the tool's selectable choices that we could not confirm in the sources we opened. The default in this calculator is 0.732. A larger k makes the port shorter. Choose the value that matches how the port is built into the box.

A port example

With one port of 10 cm diameter in a 50-litre box tuned to 35 Hz, and k = 0.732, the first term is 23,562.5 × 100 ÷ (50 × 1,225) = 38.47 and the second is 0.732 × 10 = 7.32. The port is 31.15 cm long, which is our own worked figure. The calculator also gives the volume of the port, which is 2.45 litres here, as our own working from the volume of a cylinder.

Where the constant comes from

The port formula describes a Helmholtz resonator. Wikipedia's page on Helmholtz resonance gives the equivalent length of the neck as its actual length plus 0.3 times the diameter [1]. Our own check is that the number 23,562.5 matches the resonator formula with a speed of sound of about 344 metres per second, converted to centimetres and litres. We show that as our derivation, not as a statement in the source.

Net volume of the box

For the net volume, subtract twice the board thickness from each outside dimension, multiply the three results to get the internal volume, and then take away the volume of the driver and the port. This is plain geometry and our own method. For a box 18 × 15 × 20 inches with 0.75-inch boards, that is 16.5 × 13.5 × 18.5 = 4,120.9 cubic inches, or 2.385 cubic feet. With a driver of 0.128 and a port of 0.15 cubic feet, the net volume is 2.107 cubic feet.

Driver and port volume

The displacement of a driver depends on its cone and magnet, and we have no formula for it. We therefore ask you to enter the displacement, which you may find in the maker's data. The volume of the port is also an input in this mode. The ported mode shows the volume of the ports, N × π × (D ÷ 2)² × L, so that you can use it here. That formula is our own working.

What this calculator does not do

It gives no ported alignment, which means that it does not choose the box volume and the tuning from the driver's parameters, because we found no page with those formulas. It also gives no Qtc for a ported box, as Qtc applies to sealed boxes. The port mode takes the volume and tuning from you and returns the length. Use the driver's data sheet, and test the result before you finish the enclosure.

Common mistakes

  • Using a Qtc below the driver's Qts. A sealed box can only raise Qtc above Qts.
  • Mixing litres and cubic feet. Stay in one unit system, US or metric.
  • Forgetting the port volume. The port takes space inside the box.
  • Ignoring the board thickness. The outside size is larger than the inside size.

What next

Use this often? Add Speaker Box to your Home screen.

Frequently asked questions

What is a speaker box calculator?

A tool that finds the volume of a sealed enclosure, the length of a port or the net volume of a box for a loudspeaker driver.

How do I find the volume of a sealed speaker box?

Use Vb = Vas ÷ ((Qtc ÷ Qts)² − 1), where Qtc is the target and must be above the driver's Qts.

What Qtc should I choose?

The source lists 0.500, 0.577, 0.707, 0.900 and 1.000; 0.707 is the maximally flat choice and the default.

How long should a speaker port be?

L = 23,562.5 × D² × N ÷ (V × F²) − k × D, in centimetres, litres and hertz.

How do I find the net volume of a speaker box?

Subtract twice the board thickness from each outside size, multiply, and take away the driver and port volumes.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools