Saved

Press the star next to a tool's name to save it.

All my tools

Saponification Value Calculator

Use this saponification value calculator to work out mg KOH per gram from a titration or a triglyceride's molar mass, or the lye for a given mass of a common fat or oil.

Restored your last values ·

For a titration, enter the blank and sample volumes of acid, its molarity and the mass of fat. Or enter the average molar mass of a triglyceride to get the value, or pick an oil and a mass to see the potassium hydroxide needed.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you want and fill in the boxes, then press Calculate.

See full result

A saponification value calculator gives the milligrams of potassium hydroxide needed to turn one gram of a fat or oil into soap. Work it out from a back-titration, from the average molar mass of the triglycerides, or look up the range for a common oil and find the potassium hydroxide for a given mass.

How to use the saponification value calculator

  1. Choose what you want.
  2. Enter the titration volumes, the molar mass or choose an oil and its mass.
  3. Press Calculate.

The definition

The saponification value is the amount of potassium hydroxide, in milligrams, needed to saponify one gram of fat, and it can also be given for sodium hydroxide [1]. It tells you about the average chain length of the fatty acids: shorter chains mean more ester groups per gram and a higher value. The calculator reports it in milligrams of KOH per gram.

From a titration

In the standard back-titration, the fat is boiled with a known excess of alcoholic potassium hydroxide, and the leftover is titrated with hydrochloric acid, with a blank run alongside. The page writes SV = (B − S) × M × 56.106 ÷ W, where B is the blank volume of acid in millilitres, S the sample volume, M the molarity of the acid and W the mass of the fat in grams [1]. The page lists the standards ISO 3657 and ASTM D5558 [1]. With B = 25, S = 10, M = 0.5 and W = 2 grams, SV is 210.4.

From the molar mass

A triglyceride has three ester groups, so each mole takes up three moles of potassium hydroxide, which has a molar mass of 56.1 grams per mole [1]. The saponification value is therefore 3 × 56.106 × 1000 divided by the molar mass, or 168,318 ÷ M. The page works two examples: triolein, with a molar mass of 885.4, has a value of 190, and trilaurin, with 639, has a value of 263 [1]. The calculator gives 190.1 and 263.41. The page's own equations include a glycerol term whose placement is unclear, so we use the plain form that matches its examples.

From the value to the molar mass

Rearranging gives the average molar mass as 168,318 ÷ SV. For an SV of 190 the molar mass is about 886, and for 263 it is about 640. The page cautions that these relations are not valid with more than 0.1 percent free fatty acids, with mono- and diglycerides, or with significant unsaponifiable matter [1].

Values for common oils

The page tabulates ranges in mg KOH per gram: coconut oil 248–265, palm kernel oil 230–254, palm oil 190–209, olive oil 184–196, canola 182–193, soybean 187–195, sunflower 189–195, lard 192–203, cocoa butter 192–200 and shea butter 170–190 [1]. The calculator uses the middle of the range to give the potassium hydroxide for your mass, and shows the lower and upper amounts too.

Making soap

A soap maker uses the saponification value to find how much alkali a recipe needs. For 100 grams of coconut oil with a middle value of 256.5, the calculation gives 25.65 grams of potassium hydroxide. The calculator also shows the sodium hydroxide for the same oil by scaling with the molar masses, 40.00 and 56.106, which gives about 18.3 grams. That scaling is our own working, and bar soap makers usually also take off a small percentage for a superfat.

Why a range

The values in the table are ranges because natural oils vary with the plant, the season and the processing. For a precise recipe, use the figure from your supplier's certificate, and enter it in the molar-mass mode by converting, or use it directly in your own sums. The calculator's range tells you how much margin to allow.

Checking an oil with the value

A saponification value outside the usual range for an oil is a clue to adulteration or to a different oil than the label says. For instance, a sample sold as olive oil with a value of 250 is far from the range of 184 to 196 that the table gives, and would be worth investigating. The value is one of several tests, with the iodine value and the acid value, that are used to characterise fats and oils.

Chain length and the value

Shorter fatty acid chains give a higher value, because more ester groups sit in each gram. This is why coconut oil, rich in lauric acid, has a value near 260, while long-chain oils such as canola sit near 190. You can see the same effect in the molar-mass mode: halving the average molar mass doubles the value. Try a molar mass of 639 against 885.4 to see it.

Recording your titration

Run the blank and the sample in the same way, with the same volumes of alcoholic potassium hydroxide, the same heating time and the same acid. Record the volumes to a tenth of a millilitre. A sample volume close to the blank volume means that very little alkali was used, so check that the fat was fully dissolved and boiled for long enough.

Common mistakes

  • Using normality instead of molarity. The formula uses the molarity of the acid.
  • Swapping the blank and sample volumes. The blank uses more acid.
  • Using NaOH amounts with a KOH value. Convert with the molar masses.
  • Applying the molar mass relation to a rancid oil. Free fatty acids upset it.

What next

Use this often? Add Saponificati to your Home screen.

Frequently asked questions

What is a saponification value calculator?

A tool that gives the milligrams of KOH needed to saponify one gram of fat, from a titration, a molar mass or a table of oils.

What is the formula for the saponification value?

SV = (B − S) × M × 56.106 ÷ W for a back-titration, or 168,318 ÷ M for a triglyceride.

What is the saponification value of coconut oil?

About 248 to 265 mg KOH per gram.

What is the saponification value of triolein?

About 190, from its molar mass of 885.4.

When do the molar mass formulas fail?

With more than 0.1 percent free fatty acids, mono- or diglycerides or significant unsaponifiable matter.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools