This roof truss calculator works out the main dimensions of a common pitched roof truss and how many trusses a roof needs. Enter the span and roof pitch, plus the eave overhang, and the roof truss calculator gives the top chord length, the truss height, the bottom chord and the roof angle. Add the building length and spacing to count the trusses.
How to use the roof truss calculator
- Choose US or metric units. US (feet and inches) is the default.
- Enter the span and the roof pitch as rise per 12.
- Enter the eave overhang, measured horizontally from the wall.
- Enter the building length and truss spacing to count the trusses, then press Calculate.
Parts of a truss
Wikipedia describes a truss as a structure of members joined into triangles. In a truss, the top beams are the top chords, typically in compression, and the bottom beam is the bottom chord, typically in tension. The interior members are the webs, and the spaces between them are panels. The pitched or common truss, triangular in shape, is the type most often used for roof construction, and its chord sizes and web layout depend on the span, the load and the spacing.
Common truss types
Wikipedia describes several web patterns. A king post truss has two angled members leaning into a single vertical support. A queen post truss adds a horizontal tie between two posts and is only suitable for relatively short spans. In a Pratt truss, the vertical members are in compression and the diagonals in tension; a Warren truss forms a series of equilateral triangles, alternating up and down.
The truss geometry
A symmetrical truss has two right triangles, one on each side of the peak. Each covers half the span, the run, and rises run × pitch ÷ 12. The calculator works out:
- Truss height = span ÷ 2 × pitch ÷ 12
- Top chord = √(run² + rise²), plus the overhang measured along the slope
- Bottom chord = the span
- Number of trusses = building length ÷ spacing, rounded up, plus one
Worked example
Take a building 24 feet wide with a 6-in-12 roof and a 1-foot overhang. Each side has a 12-foot run and rises 12 × 6 ÷ 12 = 6 feet, so the truss is 6 feet tall at the peak. The top chord from wall to peak is √(12² + 6²) = 13.42 feet, and with the overhang along the slope, about 14.53 feet. The roof angle is about 26.6°. For a building 40 feet long with trusses every 24 inches, you need 40 ÷ 2 + 1 = 21 trusses.
Reading the results
The big number is the length of one top chord including the overhang. The table shows the truss height, the top chord from wall to peak, the bottom chord, the roof angle and, if you entered the length and spacing, the number of trusses.
Ordering trusses
Most roof trusses are made in a factory and designed by the truss maker for your span, pitch, spacing and loads. Use the calculator to plan and to check the numbers on a quote. The overhang is often cut on site, so the maker may ask for the heel height and overhang separately.
How pitch affects the truss
A steeper pitch makes a taller truss with longer top chords on the same span. On a 24-foot span, a 4-in-12 roof rises 4 feet with top chords of about 12.65 feet from wall to peak, while an 8-in-12 roof rises 8 feet with top chords of about 14.42 feet. Taller trusses use more lumber and catch more wind, but they shed snow and rain faster and leave more room in the attic.
Spacing and the number of trusses
Trusses are set at a regular spacing along the building, measured center to center, with a truss at each end. Closer spacing means more trusses but lets each one carry less load. Enter the spacing your plans or truss maker specify. For a 40-foot building, 24-inch spacing needs 21 trusses, while 16-inch spacing needs 31.
Metric trusses
Choose metric to enter the span, overhang and building length in meters and the spacing in millimeters. The pitch is still entered as rise per 12, since that's how roof pitch is usually stated, and the angles are the same either way. A 7.2-meter span at 6-in-12 rises 1.8 meters at the peak.
Overhang along the slope
The overhang is entered as the horizontal distance the roof extends past the wall, the way it's usually shown on plans. Because the top chord slopes, its extra length is a little more than that: on a 6-in-12 roof, a 1-foot horizontal overhang adds about 1.12 feet to each top chord. The calculator does this conversion for you.
Common mistakes
- Using the inside wall width. Span is usually measured to the outside of the walls.
- Forgetting the end truss. You need one more truss than spaces.
- Measuring overhang along the slope. Enter it horizontally.
- Building trusses without a design. Members and plates need engineering.
Tips
- Check the spacing your roof sheathing allows.
- Brace trusses well during installation.
- Keep the truss drawings for your building inspector.
What next
Use this often? Add Roof Truss to your Home screen.
Frequently asked questions
How does a roof truss calculator work?
It works out the rise from the span and pitch, the top chord with √(run² + rise²) plus overhang, and the truss count from length ÷ spacing + 1.
How tall is a truss for a 24-foot span at 6/12 pitch?
6 feet at the peak.
How long is the top chord of a 24-foot, 6/12 truss?
About 13.42 feet from wall to peak, plus the overhang.
How many trusses do I need for a 40-foot building?
21 at 24 inches apart.
What are the parts of a roof truss?
Top chords, a bottom chord and the webs between them, according to Wikipedia.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.