A reverberation time calculator estimates how long sound takes to die away in a room, the time called RT60. Enter the size of the room and how absorbent the walls, the ceiling and the floor are. You can also run it the other way, from a measured RT60 to the average sound absorption coefficient of the surfaces.
How to use the reverberation time calculator
- Choose reverberation time or average absorption coefficient.
- Choose US or metric units and enter the length, width and height.
- Enter the absorption coefficients, or the measured RT60.
- Press Calculate.
What RT60 means
The reverberation time RT60 is the time that the sound level takes to fall by 60 dB after the source stops [1]. A long time makes speech hard to follow, as the syllables run together. A short time makes a room sound dry. The best value depends on what the room is for, so the calculator also prints target times for speech, communication and music.
The Sabine formula
Sabine's empirical formula is RT60 = 0.161 V ÷ A, with V the volume of the room in cubic metres and A the effective absorbing area in square metres. The Wikipedia article gives it as T60 ≈ 0.161 V ÷ (S·a), with S the total surface area and a the average absorption coefficient, so S·a is the absorbing area [1]. The calculator uses that constant of 0.161.
Absorbing area and the coefficient
The effective absorbing area is A = α₁S₁ + α₂S₂ + …, the sum of each surface's area times its absorption coefficient. The absorption coefficient is a number from 0 to 1 that tells what share of the sound that hits a surface is absorbed [1]. A value near 0 means that the surface reflects nearly all sound, and 1 means total absorption, as with an open window. Hard painted walls are low, and thick curtains or acoustic panels are high.
A worked example
Take a room 10 m long, 6 m wide and 3 m high, so V = 180 m³. The walls are 96 m² with a coefficient of 0.1, the ceiling is 60 m² with 0.3, and the floor is 60 m² with 0.2. Then A = 9.6 + 18 + 12 = 39.6 m², and RT60 = 0.161 × 180 ÷ 39.6 = 0.732 seconds. The numbers are our own example.
The Eyring formula
The Wikipedia article also gives the Eyring formula, which has a logarithm of one minus the average coefficient in the denominator [1]. It is closer to reality when the surfaces absorb a lot. For the example, the average coefficient is 39.6 ÷ 216 = 0.1833, and the Eyring time is 0.662 seconds against 0.732 for Sabine. The calculator uses the same constant 0.161 for both, which is our choice.
Finding the absorption coefficient
If you measured the RT60 of a room, you can work out how absorbent its surfaces are on average. Rearrange the Sabine formula to A = 0.161 V ÷ RT60 and divide by the total surface area S to get the average coefficient. For the example room with a measured 0.732 seconds, this gives 0.1833, and the Eyring form gives 0.1678. This reverse use is our own algebra, as it is a plain rearrangement of the formula.
Target reverberation times
The tool uses these planning formulas for the best time: 0.32 log V − 0.17 for communication, 0.37 log V − 0.14 for speech, 0.45 log V + 0.07 for music performance and 0.47 log V − 0.37 for music rehearsal. They are the tool's own rough guidance, with base 10 logarithms and the volume in cubic metres, which gives 0.69 seconds for speech in the 180 m³ room. Wikipedia says that rooms for speech typically need a shorter reverberation time than music rooms [1].
Frequency
Absorption depends on frequency, and so does the reverberation time. Wikipedia notes that most rooms absorb less low-frequency energy, which gives longer reverb times at lower frequencies [1]. Porous materials typically absorb the high frequencies better than the bass (our note), so a room can sound dry at high pitches and boomy at low ones. A single coefficient is only a broad estimate, so use it as one, or repeat the calculation with the coefficients of each octave band from the maker's data.
Limits
The formula is for a box-shaped room with sound spread evenly, and it ignores furniture, an audience and the air itself. This tool also handles only rectangular rooms. For concert halls, studios and rooms of odd shape, a measurement or a simulation is needed. For a home room or a classroom, the estimate is useful to compare before and after adding a rug or panels.
Using the calculator
Enter the dimensions in feet or metres, set the coefficients of the three kinds of surface, and press Calculate. Increase the ceiling coefficient to see the effect of an acoustic ceiling, or the floor value for a carpet. The result lists the volume, the surfaces and the absorption, so you can check each step. The tool is for planning, not for acoustic certification.
Reducing a long reverberation time
If the estimate is too long, the quickest lever is the surface with the most area. Raising the ceiling coefficient from 0.3 to 0.6 in the example room adds 18 m² of absorption and lowers RT60 from 0.732 to 0.503 seconds. A carpet on the floor works the same way. Run the tool before and after to see which change helps most, then check the result by measurement.
Common mistakes
- Entering the room size in the wrong units. Check feet or metres.
- Using a coefficient above 1. It must be between 0 and 1.
- Forgetting that the floor absorbs too. Include a carpet in its coefficient.
- Using one coefficient for all frequencies. It changes with pitch.
What next
Use this often? Add Reverberatio to your Home screen.
Frequently asked questions
What is a reverberation time calculator?
A tool that estimates how long sound takes to fall by 60 dB in a room, from its volume and absorption.
What is the Sabine formula?
RT60 = 0.161 V ÷ A, with V in cubic metres and A the total absorption in square metres.
What is a sound absorption coefficient?
A number from 0 to 1: the share of sound energy a surface absorbs.
Can I find the absorption coefficient from a measured RT60?
Yes, choose that mode: it gives the average coefficient of the room surfaces.
What is a good reverberation time?
It depends on the use: shorter for speech and studios, longer for music halls.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.