Saved

Press the star next to a tool's name to save it.

All my tools

Acoustic Impedance Calculator

Use this acoustic impedance calculator to find the impedance of a medium from its density and the speed of sound, and the share of sound reflected at a boundary.

Restored your last values ·

Enter the density of a medium and the speed of sound in it to get its acoustic impedance. Add a second medium to see how much sound is reflected at the boundary between them.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the density and the speed of sound, then press Calculate.

See full result

An acoustic impedance calculator finds the characteristic acoustic impedance of a medium from its density and the speed of sound in it. Add a second medium and it also shows how much of the sound intensity is reflected and how much passes through when sound crosses the boundary between them.

How to use the acoustic impedance calculator

  1. Enter the density and the speed of sound of the medium.
  2. Add a second medium to see the reflection.
  3. Press Calculate.

The formula

The characteristic acoustic impedance of a medium is the density times the speed of sound, z = ρ c [1]. It is measured in pascal seconds per metre, which is also called the rayl. It describes how much pressure a sound wave needs to move the medium at a given speed, so a medium with a high impedance is hard to set in motion.

Air

The page gives the impedance of air at 20 degrees Celsius as about 413.3 pascal seconds per metre [1]. With the rounded values of 1.204 kilograms per cubic metre for the density and 343 metres per second for the speed, the calculator gives 412.97, which is the same figure to the precision of the inputs. The exact result depends on the temperature and the pressure, since both change the density and the speed.

Water and solids

Water has a density of 1,000 kilograms per cubic metre and sound travels in it at about 1,480 metres per second, so its impedance is about 1,480,000 pascal seconds per metre, which is some 3,600 times that of air. These two values for water are our own figures. Solids such as steel are higher still. The very large difference between air and water or solids is the reason sound passes poorly between them.

The reflection

When sound meets a boundary between two media of different impedances, part of it is reflected. At normal incidence, the fraction of the intensity that is reflected is R = ((z₂ − z₁) ÷ (z₂ + z₁))². The page that we read does not give this formula, so it is our own statement of a standard result. The rest, 1 − R, is transmitted.

Air to water

From air to water, the impedances are 412.97 and 1,480,000. The reflected share is 99.888 percent, and only 0.112 percent is transmitted. This is why you hear so little of the world above when you swim underwater, and why a speaker on the shore is faint to a diver. A boundary between two media of equal impedance reflects nothing.

Matching

Many acoustic devices are designed to match impedances. An ultrasound probe uses a gel between the probe and the skin to remove the layer of air, and a matching layer on the transducer to reduce the mismatch between the crystal and the tissue. Horns and megaphones work in a similar way, by matching the impedance of a small source to that of the open air.

What to enter

Look up the density and the speed of sound of the medium, in kilograms per cubic metre and metres per second. For a gas, use the values at the temperature of the problem. For the second medium, enter both values, or leave both blank for the impedance of one medium only. The working line shows the product, so you can check it.

Limits

The formula is for a plane wave in a medium that is the same everywhere. The reflection formula is for a flat boundary and sound that arrives straight on. At an angle the result differs, and for thin layers the sound can interfere in the layer. The values for real materials also vary with the temperature, so use the calculator for estimates and for study.

Using the calculator

Use it to compare materials, to see why a boundary reflects sound and to check the impedance in an exercise. Try the pairs air and water, air and steel, and water and a soft tissue, and compare the reflected shares. The results show why impedance matching matters wherever sound has to cross from one medium to another.

Worked examples

For air with a density of 1.204 and a speed of 343, the impedance is 412.97 pascal seconds per metre. For water, with 1,000 and 1,480, it is 1,480,000. The ratio is about 3,584, so water has an impedance some 3,600 times that of air. Enter the two media together in the calculator, and you see that almost all of the sound is reflected. These examples use our own rounded values for the density and the speed of sound, so the results are approximate.

Reading the result

A larger impedance means that the medium is harder to set in motion by sound. Two media with similar impedances pass sound easily from one to the other, even if their densities and speeds differ. That is the reason to compare the impedances, and not the densities or the speeds alone, when you ask whether a sound will cross a boundary.

Common mistakes

  • Using the wrong units. Density in kg/m³, speed in m/s.
  • Confusing impedance with resistance. They are different quantities.
  • Applying the reflection to angled sound. It is for normal incidence.
  • Mixing up the two media. The first medium is where the sound starts.

What next

Use this often? Add Acoustic Imp to your Home screen.

Frequently asked questions

What is an acoustic impedance calculator?

A tool that finds the characteristic impedance of a medium from its density and the speed of sound.

What is the formula for acoustic impedance?

z = ρ c, the density times the speed of sound.

What is the acoustic impedance of air?

About 413.3 Pa·s/m at 20 °C.

Why does sound reflect at a boundary?

Because the impedances of the two media differ.

What unit is acoustic impedance measured in?

Pascal seconds per metre, also called the rayl.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools