A relativity calculator finds the Lorentz factor for a speed, and with it the time dilation and the length contraction of special relativity. Enter a speed as a fraction of the speed of light, or in metres or kilometres per second, and add a time or a length to see how they change.
How to use the relativity calculator
- Choose how the speed is given and enter it.
- Add a time or a length if you want them.
- Press Calculate.
The Lorentz factor
The Lorentz factor is γ = 1 ÷ √(1 − v² ÷ c²), where v is the speed and c is the speed of light, 299,792,458 metres per second [1]. It is 1 at rest and grows without limit as the speed approaches that of light. At 0.6 of c it is 1.25, at 0.8 it is 1.6667 and at 0.98 it is 5.0252. These values are our own calculations from the formula.
Time dilation
A moving clock ticks more slowly as seen by an observer. The time between ticks, as seen by the observer, is Δt′ = γ Δt [1]. A clock that shows 10 seconds while moving at 0.8 c is seen to take 16.667 seconds. This effect is real and has been measured, with fast particles and with clocks on aircraft and satellites.
The muon
The page gives the example of the muon, which has a lifetime of 2.197 microseconds at rest. A cosmic-ray muon at 98 percent of the speed of light lives about five times longer, in agreement with observations [1]. The calculator gives γ = 5.0252 at 0.98 c, and a dilated lifetime of 11.04 microseconds for the 2.197 that you enter. That is the reason that muons made high in the atmosphere reach the ground.
The space station
At the speed of the International Space Station, about 7,700 metres per second, the Lorentz factor differs from 1 by only 3.3 × 10⁻¹⁰. The page says that over six months an astronaut ages about 5 milliseconds less than someone on the Earth [1]. The calculator shows γ − 1 with enough digits to see this, which an ordinary display of γ would round away.
Length contraction
A moving object is shortened along its direction of motion: L = L₀ ÷ γ, where L₀ is the proper length, measured at rest [2]. A rod of 100 metres moving at 0.8 c measures 60 metres. The contraction occurs only along the direction of the motion [2]. At 13,400,000 metres per second the length is 99.9 percent of the rest length, and at 42,300,000 metres per second, it is 99 percent [2].
Units
You can give the speed as a fraction of c, which is easiest for fast particles, or in metres or kilometres per second. A speed of 1,000 kilometres per second is 0.003336 c, which gives γ = 1.000006. The calculator must stay below c, and tells you if the speed is at or above it, since the formula has no real value there.
Small effects
For everyday speeds, the Lorentz factor is so close to 1 that a plain display shows exactly 1. The calculator therefore gives γ − 1 in scientific notation, which is the useful number. A jet at 250 metres per second has γ − 1 of about 3.5 × 10⁻¹³. That is our own calculation. Such tiny effects are measured only with atomic clocks.
Limits
The results are for special relativity: they leave out gravity, which also changes the rate of clocks, and acceleration. For GPS satellites the gravitational effect is as important as the speed. Time dilation and length contraction are also symmetric, so each of two observers sees the other's clock slow, and the full story of a round trip needs more than these formulas.
Using the calculator
Pick the speed unit and enter the speed. Add the time on the moving clock or a proper length to see the results. Compare several speeds, such as 0.1, 0.5, 0.9 and 0.99 of c, to see how fast the effects grow near the speed of light. Check the working line for the value of v ÷ c that was used.
Lorentz factors at a glance
At 0.1 of the speed of light the Lorentz factor is 1.00504, at 0.5 it is 1.1547, at 0.9 it is 2.2942 and at 0.99 it is 7.0888. The factor rises slowly at first and then very fast, which is why the effects are only noticeable for speeds that are a large fraction of the speed of light. These values are our own calculations from the formula and you can reproduce them in the calculator.
Using the results
Use the time dilation result to see how much longer a moving process lasts for a stationary observer, and the length contraction result to see how much shorter a moving object is along its path. Both are measured by the same factor, γ, which makes the calculator a quick way to relate the two ideas.
Why the speed limit exists
The Lorentz factor shows why nothing with mass can reach the speed of light: as v approaches c, γ grows without bound, and the energy needed to speed up further grows with it. The calculator therefore refuses speeds at or above c. Particles in accelerators reach 0.9999 of the speed of light, where γ is about 70.7, but never c itself.
Common mistakes
- Using a speed above c. It is not allowed.
- Mixing up proper time and dilated time. The moving clock shows the shorter time.
- Applying contraction across the motion. It is only along the motion.
- Expecting visible effects at everyday speeds. They are tiny.
What next
Use this often? Add Relativity to your Home screen.
Frequently asked questions
What is a relativity calculator?
A tool that finds the Lorentz factor, time dilation and length contraction for a speed.
What is the Lorentz factor?
γ = 1 ÷ √(1 − v² ÷ c²).
What is time dilation?
A moving clock is seen to run slow by the factor γ.
What is length contraction?
A moving object is shorter along its motion by the factor γ: L = L₀ ÷ γ.
What is the speed of light?
299,792,458 metres per second.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.