A recessed lighting calculator helps you to space recessed lights, also called can lights or downlights, evenly across a ceiling. Enter the length and width of the room and how many rows and columns of lights you want, and the calculator gives the spacing between the lights and the distance from the first light to the walls. It uses simple grid geometry, which is our own working rather than a published standard. It runs in your browser and nothing you enter is sent anywhere.
How to use the recessed lighting calculator
- Choose US or Metric units.
- Enter the length and the width of the ceiling.
- Enter the number of rows and columns of lights.
- Press Plan the lights and mark the positions on the ceiling.
The idea: an equal area for each light
A common way to plan the layout is to give each light the same area of floor to light. The calculator divides the ceiling into a grid of equal cells, one for each light, and puts a light in the centre of each cell. The tool assumes that all the lights are the same and that they shine straight down, not at an angle like a spotlight. Most recessed fixtures are cylindrical and fit into a circular hole in the ceiling,[1]
The formulas
For a ceiling of length A and width B, with r rows and c columns, the distance between the rows is A divided by r. The distance from the first row to the end wall is half of that, A divided by 2r. In the same way, the distance between the columns is B divided by c, and the distance from the first column to the side wall is B divided by 2c. The total number of lights is r times c. The half-spacing at the walls is what makes the pattern even, with the same gap at the walls as between lights, counted from the centre of each cell.
Worked examples
Our first example is a square ceiling 3 metres wide with 2 rows and 2 columns. Each cell is 1.5 by 1.5 metres, and the lights are 0.75 metres from the walls. Our second example is a ceiling 5 metres long and 3 metres wide with 2 columns and 2 rows. The spacing across the width is 3 divided by 2, which is 1.5 metres, with the first light 0.75 metres from the side wall. Along the length, the spacing is 5 divided by 2, which is 2.5 metres, with the first light 1.25 metres from the end wall.
How many lights
The calculator does not tell you how many lights you need. That depends on the lumens you want in the room and on the lumens of each fixture, which is a separate calculation. A common way to use the two together is to work out the number of lights you need from the brightness, and then use this calculator to find how to split them into rows and columns that fit the ceiling. Try different numbers of rows and columns until the spacing is close to equal in both directions.
Practical tips
Mark the positions on the ceiling with a pencil, and check them against the joists, pipes and wires above before you cut any holes. Many lights can be moved a little to miss a joist, and an even grid looks best if the moves are small. Fix the exact positions only after you have checked the space above the ceiling. Housings that are not rated for contact with insulation need at least 3 inches of clear space from it, while IC-rated housings can touch insulation,[1] so check the rating of the fixture you plan to buy.
Reading the result
The calculator shows the spacing between the rows and between the columns, the distance from the first row and the first column to the walls, and the total number of lights. If the two spacings are close to each other, the lights form a nearly square grid, which gives an even pool of light. If one spacing is much larger, the grid looks stretched, and you may want to change the number of rows or columns until the two are closer.
Choosing rows and columns
Start with the number of lights you need and look for factors that suit the shape of the room. For a long, narrow room, you might use one or two columns and several rows. For a square room, use the same number of rows and columns. The spacing for a room of 16 by 10 feet with 4 rows and 3 columns is 4 feet along the length and about 3.3 feet across the width, which is a fairly even grid.
Spacing from the walls
The calculator puts the first light at half of the spacing from the walls, so that every light has the same area of floor around it. This also lights the area next to the wall. In some rooms you may want the lights closer to the walls, for example to light a row of pictures, or farther from them, to avoid light on a wall with a television. Move the first row to suit the room and keep the rest of the grid even.
Beyond the grid
The tool can be used for other kinds of fixture, as long as they light the area below them. A grid is only one way to place lights, and many designers place them to light specific things such as a counter, a table or a reading chair. Use the grid as a starting point for general lighting and add separate lights for tasks.
Common mistakes
- Putting the first row against the wall. It should be half the spacing from the wall.
- Mixing up rows and columns. Rows run along the length in this calculator.
- Using the grid for brightness. It only spaces the lights.
- Ignoring what is above the ceiling. Joists and pipes may block a position.
What next
Use this often? Add Recessed Lig to your Home screen.
Frequently asked questions
What is a recessed lighting calculator?
A tool that finds the spacing for recessed lights in a grid, and their distance from the walls.
How far apart should recessed lights be?
The calculator splits the ceiling into equal cells: the spacing is the ceiling length divided by the number of rows, and the width divided by the number of columns.
How far from the wall should the first light be?
Half of the spacing: length ÷ 2r for rows, and width ÷ 2c for columns.
What is the spacing for a 5 by 3 metre ceiling with 2 rows and 2 columns?
2.5 metres along the length and 1.5 metres across the width.
Does it say how many lights I need?
No. It only lays out a grid. Use a lighting calculator for the number of lights.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.