Saved

Press the star next to a tool's name to save it.

All my tools

Radiation Dose Converter

This radiation dose converter changes absorbed dose between gray and rad and equivalent dose between sievert and rem, including milli and micro units.

Restored your last values ·

Gray and rad measure absorbed dose; sievert and rem measure equivalent or effective dose. Convert within one quantity: 1 Gy = 100 rad and 1 Sv = 100 rem.

Everything is worked out in your browser. Nothing you type is sent anywhere.

Converted dose

–

Enter a dose and press Convert.

See full result

A radiation dose converter changes a radiation dose from one unit to another: grays to rads, millisieverts to millirems, microsieverts to millisieverts and so on. Choose whether you're converting an absorbed dose (gray and rad) or an equivalent dose (sievert and rem), enter the value, and this radiation dose converter shows the result plus the same dose in every unit of that quantity.

Gray and rad: absorbed dose

The gray (Gy) is the SI unit of absorbed dose: the absorption of one joule of radiation energy per kilogram of matter. It measures the energy that ionizing radiation deposits in a material, and it's used for the delivered dose in radiotherapy, food irradiation and radiation sterilization, and for predicting acute health effects. It was named after the British physicist Louis Harold Gray and adopted as part of the International System of Units in 1975. The older CGS unit is the rad:

  • 1 Gy = 100 rad
  • 1 rad = 0.01 Gy = 1 cGy

So a dose in rads is numerically the same as the dose in centigrays.

Sievert and rem: equivalent dose

The sievert (Sv) is an SI derived unit intended to represent the stochastic health risk of ionizing radiation, meaning the probability of causing radiation-induced cancer and genetic damage. It's used for equivalent dose, effective dose and committed dose in dosimetry and radiation protection. A sievert is an absorbed dose modified by weighting factors. It's named after the Swedish medical physicist Rolf Maximilian Sievert. The older CGS unit is the rem:

  • 1 Sv = 100 rem
  • 1 mSv = 100 mrem
  • 1 rem = 10 mSv

Why gray and sievert aren't converted directly

Grays and sieverts share the same base units, joules per kilogram, but they measure different things. A gray is the physical energy absorbed. A sievert estimates the biological risk, so it's the absorbed dose adjusted by weighting factors for the type of radiation and, for effective dose, the tissues exposed. Because the factors depend on the situation, there's no single conversion from grays to sieverts. That's why this converter keeps the two quantities separate: pick the quantity first, then convert between its units.

How to use the radiation dose converter

  1. Choose the quantity: absorbed dose for gray and rad, or equivalent dose for sievert and rem.
  2. Enter the dose.
  3. Pick the From and To units. Press Swap units to reverse them.
  4. Press Convert to see the result and the dose in every unit.

Worked examples

  • 2 Gy to rad: 2 × 100 = 200 rad.
  • 350 rad to Gy: 350 × 0.01 = 3.5 Gy.
  • 3 mSv to mrem: 3 × 100 = 300 mrem.
  • 500 mrem to mSv: 500 ÷ 100 = 5 mSv.
  • 50 µSv to mSv: 50 ÷ 1,000 = 0.05 mSv.

The prefixes

Doses span a huge range, so prefixes are common. A millisievert (mSv) is a thousandth of a sievert, and a microsievert (µSv) is a millionth. A centigray (cGy) is a hundredth of a gray, and a milligray (mGy) a thousandth. In US documents you'll often see millirem (mrem) and millirad (mrad), each a thousandth of a rem or rad. Dose rates, such as microsieverts per hour on a background radiation display, use the same units over time; convert the dose part here and keep the time part the same.

Where you'll see these units

  • Medical imaging and radiotherapy reports, which may give doses in grays, milligrays or millisieverts.
  • Workplace dosimeter readings for radiation workers, often in millisieverts or millirems.
  • Background radiation displays, such as microsieverts per hour.
  • Older US documents, which use rads and rems instead of grays and sieverts.

This tool only converts units. It doesn't assess whether a dose is safe; for health questions about a radiation exposure, ask a medical professional or a radiation safety officer.

Converting by hand

Because both pairs of units differ by exactly a factor of 100, conversions are easy to check. To go from grays to rads, or sieverts to rems, multiply by 100. To go the other way, divide by 100. For prefixed units, first convert the prefix: 1 gray is 1,000 milligrays and 1,000,000 micrograys, and the same applies to sieverts. So 0.5 mGy is 0.0005 Gy, which is 0.05 rad, or 50 mrad. The table under the result shows every unit at once, so you can see all of these steps together.

Reading the table of units

After you convert, the table lists the same dose in each unit of the quantity you chose. That's handy when a document uses a unit you don't work with every day, or when two sources report the same dose differently. Very large or very small results are shown in scientific notation, such as 2.5 × 10⁻⁷, so that no digits are lost.

Older and newer units together

Many US documents still use rads and rems, while most of the world and most scientific papers use grays and sieverts. You may see both in the same report, for example 10 mSv (1 rem). When you compare figures from different sources, convert them to the same unit first so that a factor of 100 doesn't slip through unnoticed.

Common mistakes

  • Converting grays to sieverts one-to-one. They measure different quantities.
  • Mixing up milli and micro. 1 mSv is 1,000 µSv.
  • Forgetting the factor of 100 between SI and older units.
  • Dropping the time from dose rates.

What next

Use this often? Add Radiation Do to your Home screen.

Frequently asked questions

How does the radiation dose converter work?

Pick absorbed dose (gray, rad) or equivalent dose (sievert, rem), enter a value, and it converts between units using 1 Gy = 100 rad and 1 Sv = 100 rem.

How many rads are in a gray?

1 gray equals 100 rad, so 1 rad equals 0.01 Gy, or 1 centigray.

How many rem are in a sievert?

1 sievert equals 100 rem, so 1 mSv equals 100 mrem.

Can I convert grays to sieverts?

Not directly. A sievert is an absorbed dose adjusted by weighting factors that depend on the radiation and tissue.

What is the difference between gray and sievert?

The gray measures energy absorbed per kilogram; the sievert estimates the health risk of that dose.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools