Saved

Press the star next to a tool's name to save it.

All my tools

Protein Molecular Weight Calculator

Use this protein molecular weight calculator to estimate a protein's mass in daltons and kilodaltons from its number of amino acids, or the number of amino acids from a mass.

Restored your last values ·

Enter the number of amino acids to estimate the molecular weight in daltons and kilodaltons, or enter a molecular weight in kDa to estimate the number of amino acids. The default residue mass of 110 Da is a common rule of thumb, which you can change.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the number of amino acids and press Calculate.

See full result

A protein molecular weight calculator estimates the mass of a protein from the number of amino acids in its chain, and the number of amino acids from a mass given in kilodaltons. Enter the number of residues and an average residue mass, and the calculator adds the water that completes the chain. It is an estimate, because every real protein has its own mix of amino acids.

How to use the protein molecular weight calculator

  1. Choose whether you know the number of amino acids or the molecular weight.
  2. Enter the number of residues, or the mass in kilodaltons.
  3. Keep the average residue mass of 110 Da or type your own, and choose whether to add the water of the chain.
  4. Press Calculate.

The estimate

A chain of n amino acids has a mass of about n times the average residue mass, plus one molecule of water for the two ends of the chain. For 100 residues at 110 Da, that is 11,000 Da plus 18.0153 Da, or 11,018 Da, which is 11.018 kDa. The mass of a water molecule is about 18.0153 Da [1]. The page on the proteinogenic amino acids says that the mass of a protein equals the mass of the amino acids it is made of minus 18.01524 Da per peptide bond [2]. The figures differ in the fifth decimal place, which does not matter for an estimate.

The average residue mass

The value of 110 Da per residue is a widely used rule of thumb, and it is our own choice because the pages we read do not state it. Averaging the twenty amino acids without weighting them gives a higher figure, near 119 Da, but proteins use the small residues such as alanine and glycine more often, which pulls the average down. If you know the composition, type a better value into the box. A protein with many large residues such as tryptophan will weigh more than the estimate.

Daltons and kilodaltons

The dalton is the unit of atomic mass, and a mass of one dalton per molecule is one gram per mole. The page on the dalton says that a protein with an average mass of 64 kDa has a molar mass of 64 kg/mol [1]. So 64 kDa is 64,000 g/mol. The calculator prints all three forms. Use grams per mole when you prepare solutions, because a solution of 1 mole per litre of a 64 kDa protein would need 64,000 grams per litre in principle.

From mass to length

To go the other way, subtract the water, divide by the residue mass, and read the result as the number of amino acids. A 64 kDa protein is about 582 residues long at 110 Da, because 63,982 divided by 110 is 581.65. The result is not a whole number because the input is an average, so treat it as a guide. A protein that is far longer or shorter than expected may have lost a piece or carry extra modifications.

Modifications and subunits

Many proteins carry sugars, phosphate groups or other additions, and many work as complexes of several chains. Those add mass that this calculator does not see. The estimate is for one chain made of amino acids only. If you measured a mass on a gel, remember that gels give only a rough size.

Worked examples

A peptide of 20 residues weighs about 2,218 Da. A protein of 300 residues weighs about 33,018 Da, which is 33 kDa. A protein of 1,000 residues weighs about 110 kDa. A protein of 150 kDa has about 1,363 residues. These are our own calculations from the rule of thumb.

Why proteins differ in mass

The twenty amino acids range from glycine, a very small residue, to tryptophan, a large one. A protein rich in glycine and alanine weighs less per residue than the average, and one rich in tryptophan, tyrosine and arginine weighs more. That is why the number of residues gives only an estimate. The best way to get an exact mass is to add up the residue masses of the sequence, or to measure the protein by mass spectrometry.

Using the result

The estimate is useful for planning a gel, choosing a column, converting between mass concentration and molar concentration, or checking whether a band is the size you expect. For a molar concentration, divide the mass concentration in grams per litre by the molar mass in grams per mole. A solution of 1 gram per litre of a 64 kDa protein is about 15.6 micromolar, since 1 divided by 64,000 is 0.0000156.

Biochemists use daltons for single molecules and kilodaltons for proteins. Megadaltons are used for large complexes such as ribosomes. The calculator gives the grams per mole figure so you can move between these units and the units of chemistry.

Common mistakes

  • Treating the estimate as exact. The true mass depends on the composition.
  • Forgetting the water. Each chain has one extra water, though it matters little for long chains.
  • Mixing kDa and Da. 1 kDa is 1,000 Da.
  • Counting subunits as one chain. A complex has more than one chain.

What next

Use this often? Add Protein Mole to your Home screen.

Frequently asked questions

What is a protein molecular weight calculator?

A tool that estimates a protein's mass from its number of amino acids and an average residue mass, and the reverse.

How do I estimate the mass of a protein?

Multiply the number of amino acids by an average residue mass of about 110 Da and add 18.0153 Da for water. 100 residues is about 11,018 Da.

How many amino acids are in a 64 kDa protein?

About 582, using 110 Da per residue.

How many grams per mole is a kilodalton?

1 kDa is 1,000 g/mol, so a 64 kDa protein has a molar mass of 64 kg/mol.

Is the estimate exact?

No. Each protein has its own mix of amino acids, so the true mass can differ from the estimate by several percent.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools