Saved

Press the star next to a tool's name to save it.

All my tools

Principal Stress Calculator

Use this principal stress calculator to find the maximum and minimum principal stresses, the angle, Mohr's circle and the von Mises stress from σx, σy and τxy.

Restored your last values ·

Enter the two normal stresses and the shear stress on an element in plane stress, using one unit for all three and tension as positive. You get the principal stresses, Mohr's circle, the maximum shear stress, the angles and the von Mises stress.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter σx, σy and τxy, then press Calculate.

See full result

A principal stress calculator turns the stresses on an element into its principal stresses, the largest and smallest normal stresses, at the angle where the shear is zero. Enter σx, σy and τxy. It also gives the Mohr's circle centre and radius, the maximum shear stress and the von Mises stress.

How to use the principal stress calculator

  1. Enter σx, σy and τxy in one unit.
  2. Add a yield strength for a safety factor if you want one.
  3. Press Calculate.

What principal stresses are

The inputs are σx, the horizontal normal stress, σy, the vertical normal stress, and the shear stress τxy. The tool gives the maximum and minimum principal stresses and their angle [1]. The shear stress components are symmetric, so τyx equals τxy [3]. The principal stresses are the normal stresses on the planes where the shear stress is zero.

The formulas

The maximum principal stress is σ₁ = (σx + σy)/2 + √(((σx − σy)/2)² + τxy²), and the minimum, σ₂, has a minus sign before the root. The Wikipedia article on Mohr's circle gives σ₁ and σ₂ as the circle's centre σavg plus or minus its radius R [1]. The root is the radius, so the two principal stresses lie the same distance on either side of the average.

Mohr's circle

Mohr's circle is drawn with normal stress across and shear stress up. Its centre is on the normal axis at σavg = (σx + σy)/2, and its radius is R = √(((σx − σy)/2)² + τxy²) [1]. The principal stresses are where the circle crosses the axis, and the largest and smallest shear stresses are the highest and lowest points, with the size R [1]. The calculator shows the centre and the radius.

The principal angle

A common form of the angle is θ = ½ arctan(2τxy/(σx − σy)), the form that Wikipedia's worked example uses [1]. The article's text writes it as tan 2θp = 2τxy/(σy − σx), and it does not reconcile the two sign arrangements [1]. We use θp = ½ atan2(2τxy, σx − σy), our own choice that keeps the quadrant right. It is the direction of σ₁, from the x axis.

The first example

With σx = 10, σy = 10 and τxy = 8 (our first example), the average is 10 and the root is √(0 + 64) = 8. So σ₁ = 18 and σ₂ = 2, with a principal angle of 45 degrees and maximum shear planes at 90 degrees. The planes of maximum shear are 45 degrees away from the principal planes, because angles on Mohr's circle are doubled.

The second example

The Wikipedia article works σx = −10, σy = 50 and τxy = 40 megapascals, and finds σavg = 20, R = 50, σ₁ = 70 and σ₂ = −30, with τmax = 50 and principal angles of 63.435 and −26.565 degrees [1]. The calculator gives σ₁ = 70, σ₂ = −30 and θp = 63.4349 degrees, the same numbers. The article measures its angles from a different plane, as the text notes, so check the convention.

Von Mises stress

For plane stress, the von Mises stress is √(σ₁² − σ₁σ₂ + σ₂²), which equals √(σx² − σxσy + σy² + 3τxy²) [2]. Yielding is predicted when it reaches the tensile yield strength of the material [2]. The von Mises stress is the equivalent stress of the von Mises yield criterion. For the first example, the von Mises stress is 17.088.

Safety factor

If you enter a yield strength, the calculator divides it by the von Mises stress. This is our own working, from the statement that yielding is predicted when the stress reaches the yield strength [2]. For a yield strength of 250 and the first example, the ratio is 14.63. A value of 1 means yielding is predicted. It is not a design margin, since real designs add allowances for loads, defects and fatigue.

Absolute maximum shear

In plane stress the third principal stress is zero. The largest shear stress in three dimensions is then half of the biggest difference among σ₁, σ₂ and 0. This is our own working, from the standard relation for three principal stresses, and it is not stated on the pages. For σ₁ = 18 and σ₂ = 2 it is 9, which is larger than the in-plane maximum of 8, as it must be when both are positive.

Mohr circle and von Mises rows

The same page covers searches for a Mohr circle calculator and a von Mises stress calculator, since all three use one stress state. The circle gives the centre, radius and angles. The von Mises line gives an equivalent stress for ductile materials. Brittle materials are often checked against the largest principal stress instead; this is our own note and is not stated on the pages we read. Use whichever criterion your material and code require.

Signs and the meaning of the numbers

Tension is taken as positive and compression as negative, so the σ₂ = −30 of the second example is a compressive principal stress [1]. The planes of maximum shear are not free of normal stress: they carry a normal stress equal to the average, which is 20 in the second example [1]. A shear stress that changes sign swaps the principal angle to the other side of the x axis, so check the sign convention of your textbook or software before you compare angles, since Wikipedia's text and its worked example do not write the angle in the same way [1]. The principal stresses themselves do not depend on that convention, and they are the same if you swap σx and σy. If τxy is zero, the principal stresses are σx and σy themselves, and the calculator reports an angle of 0 or 90 degrees.

Common mistakes

  • Mixing the units of the stresses. Use one unit for all three.
  • Using the wrong sign for compression. Tension is positive.
  • Taking the angle from the wrong axis. It is from the x axis to σ₁.
  • Treating the safety factor as a design margin. It is only the ratio of the yield strength to the von Mises stress.

What next

Use this often? Add Principal St to your Home screen.

Frequently asked questions

What is a principal stress calculator?

A tool that finds the largest and smallest normal stresses on an element, where the shear stress is zero.

What is Mohr's circle?

A circle with its centre at the average normal stress and a radius equal to the maximum in-plane shear stress.

How is the von Mises stress found in plane stress?

It is the square root of σ₁² − σ₁σ₂ + σ₂², or of σx² − σxσy + σy² + 3τxy².

What unit does it use?

Any unit of stress, as long as all three inputs use the same one.

Is the maximum principal stress the same as the maximum shear stress?

No. The in-plane maximum shear stress is the Mohr's circle radius, half of σ₁ − σ₂.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools