A prandtl meyer expansion calculator finds the flow after a supersonic stream turns around a convex corner. Enter the Mach number before the corner and the turning angle, and it gives the Mach number after the expansion, the pressure, temperature and density ratios and the Mach angles.
How to use the prandtl meyer expansion calculator
- Enter the upstream Mach number and the turning angle.
- Change γ if the gas is not air.
- Add the upstream pressure, temperature and density to see the downstream values.
- Press Calculate.
What an expansion wave is
When a supersonic flow follows a surface that turns away from it, the flow expands and speeds up through an expansion fan. This calculator finds the downstream flow properties after such an expansion wave, from the upstream Mach number and the surface deflection angle [2]. Pressure, temperature and density can be added if the upstream values are known.
The Prandtl–Meyer function
The calculation rests on the Prandtl–Meyer function ν(M), which is zero at Mach 1. For an ideal gas it is ν(M) = √((γ+1)/(γ−1)) · arctan √((γ−1)(M²−1)/(γ+1)) − arctan √(M²−1) [1]. The Wikipedia article gives the same function as an integral with the constant chosen so that ν equals 0 at M = 1 [1]. The angle is given in degrees here.
The method
For an expansion, the rule is ν(M₂) = ν(M₁) + θ [1][2]. The method is to find ν at the upstream Mach number, add the deflection angle and then invert the function, by iteration or from tables. The calculator does the inversion by bisection, which is our own choice of method. ν rises with the Mach number, so there is one answer for any turn that the gas can make.
A worked example
Take M₁ = 1.5, a 15 degree turn and γ = 1.4. Then ν₁ = 11.905 degrees, ν₂ = 11.905 + 15 = 26.905 degrees, and the calculator gives M₂ = 2.0191. A rounded hand calculation might give M₂ = 2.0, but ν₂ = 26.905 degrees corresponds to a Mach number near 2.02, so the tool follows the formula and not a rounded figure.
Pressure, temperature and density
The expansion is isentropic, so the stagnation properties stay constant. The isentropic relations are T₂/T₁ = (1 + (γ−1)M₁²/2) ÷ (1 + (γ−1)M₂²/2), p₂/p₁ = (T₂/T₁)^(γ/(γ−1)) and ρ₂/ρ₁ = (T₂/T₁)^(1/(γ−1)) [2]. For the example the temperature ratio is 0.79874, so 288 K becomes 230.04 K, and the density 1.22586 becomes 0.69896.
Pressure and the value of γ
The pressure ratio from the formula is 0.4554, so the tool gives 0.455 atm for an upstream pressure of 1 atm. We use γ = 1.4 as the default, the usual value for air [2]. You can change γ for other gases.
The Mach angle
The Mach angle is μ = arcsin(1/M) [2]. In the example μ₁ is 41.81 degrees before the corner and μ₂ is 29.687 degrees after it. The expansion fan lies between these two lines. The calculator shows both so that you can sketch the fan, with its first line at the upstream Mach angle.
The largest possible turn
As the Mach number rises from 1 to infinity, ν rises from 0 to a maximum of (π/2)(√((γ+1)/(γ−1)) − 1) [1]. The article does not work this out for air. Our calculation gives 130.45 degrees for γ = 1.4, so from Mach 1.5 the flow can turn a further 118.55 degrees. If you ask for more, the tool says that the turn is too large, since the gas would have to expand into a vacuum.
Compression is different
This tool covers only expansion. For isentropic compression the Wikipedia article uses ν(M₂) = ν(M₁) − θ [1], but a compression turn in a real flow usually makes shock waves, which this tool does not model. If a surface turns into the flow, use an oblique shock calculation instead. The result here is for a smooth expansion round a convex corner, or a gradual bend.
Limits of the result
The formulas assume an ideal gas with a constant specific heat ratio, steady flow and no friction, and the expansion is isentropic [2]. Real flows have boundary layers, changing γ at high temperature and three-dimensional effects at the edges. Use the numbers for study, for checking a hand calculation and for a first estimate, and use a proper solver for design.
Reading the result and trying other cases
A larger Mach number after the turn, with lower pressure, temperature and density, is the signature of an expansion. In the example the pressure ratio of 0.4554 means that the pressure falls to under half of its upstream value, and the temperature ratio of 0.79874 means a fall of about 20 percent. Try a Mach 2 flow with a 10 degree turn: the calculator gives M₂ = 2.3849, with a pressure ratio of 0.54797 and a Mach angle that narrows from 30 degrees to 24.791 degrees, which is our own run of the formulas above. Changing γ to 1.3 for the same case gives M₂ = 2.3356, so the gas matters. The temperature must be entered in kelvin because the ratio only makes sense on an absolute scale, our own note. Pressure and density come back in the unit that you typed, so any unit works for them.
Common mistakes
- Entering a subsonic Mach number. The flow must be above Mach 1.
- Mixing up expansion and compression. The tool is for flow that turns away from itself.
- Using γ = 1.4 for a hot gas. Change γ for other gases.
- Entering the temperature in degrees Celsius. Use kelvin.
What next
Use this often? Add Prandtl Meye to your Home screen.
Frequently asked questions
What is a prandtl meyer expansion calculator?
A tool that finds the Mach number and the properties of a supersonic flow after it turns around a convex corner.
What is the Prandtl–Meyer function?
ν(M), an angle that is 0 at Mach 1 and rises with the Mach number; the flow turn equals the change in ν.
How is the downstream Mach number found?
Add the turning angle to ν at the upstream Mach number, then invert ν to get M₂.
What is the largest turn?
ν_max = (π/2)(√((γ+1)/(γ−1)) − 1), about 130.45 degrees for γ = 1.4.
Does it work for compression?
No. It covers expansion only; compression usually forms shock waves.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.