Saved

Press the star next to a tool's name to save it.

All my tools

Pond Calculator

Enter your pond’s shape, size and depth. The pond calculator works out how many gallons it holds, the size of liner to buy with overlap, and the pump flow in gallons per hour for a water garden, goldfish or koi pond.

Restored your last values ·

For the volume. Average several measurements.

Liner to tuck under the edging on each side.

Liner = size + 2 × deepest point + 2 × overlap. Pump flow is the volume times the turnovers per hour.

Pond volume

–

Enter the pond’s size and depth.

See full result

The pond calculator works out the three numbers you need to plan a garden pond: how much water it holds, how big a liner to buy, and how strong a pump to run. Choose a rectangular, round or oval pond, enter its size and depth, and it gives the volume in US gallons (or liters), the liner size including overlap at the edges, and the pump flow in gallons per hour (GPH) for the kind of pond you’re keeping. For example, a 10 × 8 ft pond 2 ft deep holds about 1,197 gallons and needs a 16 × 14 ft liner.

How the pond calculator works

  • Surface area: length × width for a rectangle, π × (diameter ÷ 2)² for a circle, and π × (length ÷ 2) × (width ÷ 2) for an oval.
  • Volume: surface area × average depth. In US units, cubic feet × 7.48 gives gallons, because a gallon is 231 cubic inches. In metric, cubic meters × 1,000 gives liters.
  • Liner size: Pond Pro Direct’s formula is pond length + 2 × depth + 2 ft, and the same for the width. The depth is doubled because the liner goes down one side and up the other, and the 2 ft gives 1 ft of overlap on each side to anchor under edging stones.
  • Pump flow: volume × turnovers per hour.

How to use the pond calculator

  1. Choose US or metric units and the pond’s shape.
  2. Enter the length and width, or the diameter for a round pond.
  3. Enter the average depth for the volume. Pond floors are rarely flat, so use an average of several measurements.
  4. Enter the deepest point for the liner, if it’s deeper than the average.
  5. Set the overlap per side (1 ft if blank) and choose the type of pond for the pump size.

Worked examples

Water garden: a 10 × 8 ft rectangle, 2 ft deep, has 80 sq ft of surface and 160 cubic feet of water, or about 1,197 gallons. The liner is 10 + 4 + 2 = 16 ft by 8 + 4 + 2 = 14 ft, matching Pond Pro Direct’s worked example. A pump moving about 1,200 GPH turns the water over once an hour.

Round koi pond: 8 ft across with an average depth of 1.5 ft and a deepest point of 2 ft holds about 564 gallons. The liner is 14 × 14 ft, and a koi pond’s pump should move about 1,128 GPH, twice the volume each hour.

Metric: a 3 × 2 m pond 0.6 m deep holds 3,600 liters and needs a 4.8 × 3.8 m liner with 30 cm of overlap on each side.

Choosing a pump

Pond Pro Direct sizes pumps by turnover: the whole pond volume should pass through the filter at least once an hour for a water garden or lightly stocked pond, 1.5 times an hour for a heavily stocked goldfish pond, and twice an hour for koi, which it calls non-negotiable. It recommends even more for koi in summer heat. Remember that a pump’s boxed GPH is its rating with no resistance. Lifting water up to a filter or waterfall and pushing it through tubing reduces the real flow, sometimes to half the label, so check the pump’s flow chart at your total head height and choose one that still delivers the GPH the calculator gives.

Choosing a liner

The liner is the hardest part to replace once a pond is filled and planted, so it pays to get the size right. Use the deepest point, not the average, when working out the liner, and round up to the next size the supplier sells. Pond Pro Direct suggests 1.5 ft per side instead of 1 ft for complex builds with tall waterfalls or irregular shapes; enter that in the overlap box. Shelves for marginal plants don’t change the liner size, as long as you use the full depth.

Why the volume matters

  • Water treatments and dechlorinators are dosed by gallons.
  • Filters are rated for a maximum pond volume.
  • Fish stocking depends on how much water there is.
  • Filling a large pond from a garden hose can take hours; knowing the gallons helps you plan.

Irregular ponds

Most garden ponds are free-form rather than perfect rectangles or circles. For an irregular pond, measure the longest length and the widest width and choose the oval shape, which usually gives a closer estimate than a rectangle. For a very irregular pond, split it into simpler shapes, work each one out and add the gallons together.

Measuring a pond that already exists

If your pond is already built and full, measure the length and width at the water surface and take the depth with a pole or tape at several points across it: near the edges, on any plant shelves and in the deepest part. Average them for the volume. Knowing the true volume helps when you dose treatments, which are often measured per 100 or 1,000 gallons, and when you check whether your pump and filter are big enough.

Plant shelves and steep sides

Many ponds have a shallow shelf around the edge for marginal plants, with a deeper zone in the middle. The shelf reduces the volume but not the liner, which still has to follow every step down to the bottom. That’s why the calculator asks for the average depth for the gallons and the deepest point for the liner. Steep sides use slightly less liner than gentle slopes.

For a swimming pool, use the pool volume calculator. Convert gallons to liters or cubic feet with the volume converter, and work out gravel for the edges with the gravel calculator.

What next

Use this often? Add Pond to your Home screen.

Frequently asked questions

How does the pond calculator work out gallons?

It multiplies the surface area by the average depth to get cubic feet, then multiplies by 7.48, the number of gallons in a cubic foot.

What size liner do I need for my pond?

Pond length + 2 × depth + 2 ft by pond width + 2 × depth + 2 ft. A 10 × 8 ft pond 2 ft deep needs a 16 × 14 ft liner.

What size pump do I need for my pond?

One that moves the full pond volume at least once an hour for a water garden, 1.5 times for heavily stocked goldfish and twice for koi, at your real head height.

How many gallons is a 10 × 8 × 2 ft pond?

About 1,197 gallons, from 160 cubic feet of water.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools