Saved

Press the star next to a tool's name to save it.

All my tools

Pleated Skirt Calculator

Use this pleated skirt calculator to work out the size of the skirt fabric and the waistband to cut for a knife-pleated or box-pleated skirt from your waist and length.

Restored your last values ·

Choose knife or box pleats, and enter your waist, the number of pleats, the length of the skirt, the hem, the seam allowance and the finished width of the waistband. The calculator gives the pieces of fabric to cut.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter your waist, the number of pleats, the skirt length and the waistband width, then press Find the fabric.

See full result

A pleated skirt calculator works out how much fabric you need to cut for a skirt with knife pleats or box pleats. Enter your waist, the number of pleats, the length of the skirt and the width of the waistband, and the calculator gives the size of the skirt fabric and of the waistband piece. It uses simple equations that are our own working. It runs in your browser and nothing you enter is sent anywhere.

How to use the pleated skirt calculator

  1. Choose US or Metric units and the type of pleat.
  2. Enter your waist and the number of pleats.
  3. Enter the skirt length, the hem and the seam allowance.
  4. Enter the finished waistband width and press Find the fabric.

Knife pleats and box pleats

Wikipedia describes knife pleats as pleats turned to one side, and box pleats as knife pleats back-to-back.[1] It also says that three inches of fabric create one inch of finished pleat.[1] Our calculator uses simpler factors of its own: each pleat takes twice the waist share for knife pleats and three times for box pleats, so a box-pleated skirt needs more fabric than a knife-pleated one with the same waist. These factors are our working, so compare them with the ratio in your pattern.

The formulas

For the fabric used in each pleat, the calculator divides the waist by the number of pleats and multiplies the result by 2 for knife pleats or by 3 for box pleats. The skirt fabric width is the fabric for each pleat times the number of pleats, plus the seam allowance. The skirt fabric length is the length you want plus the bottom hem plus the seam allowance. The waistband fabric length is twice the band measurement plus twice the seam allowance, and the waistband width is the waist plus an overlap plus twice the seam allowance. We allow an overlap of about 1 inch, or 3 centimetres, for the closure.

Worked example

Here is our own example. For a waist of 30 inches with 20 knife pleats, each pleat uses 30 divided by 20, times 2, which is 3 inches of fabric. With a seam allowance of half an inch, the skirt fabric is 60.5 inches wide. For a length of 22 inches with a 2-inch hem, the skirt fabric is 24.5 inches long. A waistband of 1.5 inches finished needs a strip 4 inches long in the formula and 32 inches wide, which is the waist plus 1 plus 1. Fabric is usually 45 to 60 inches wide, so you may need to join two lengths.

Planning the pleats

The number of pleats is your choice. More pleats make a fuller, finer skirt, and fewer make wider folds. Because the formula divides the waist by the number of pleats, every pleat is the same size. Mark the folds on the fabric before you press them, and press each pleat with the iron before you stitch it at the waist. A pleat should be neat and straight, so allow time for pressing.

How the pleats and band are defined

The width of each pleat comes from the waist and the number of pleats, so this calculator takes only the number of pleats. The waistband length is read as the finished width of the band, doubled because the band is folded. Check the figures against your pattern.

Reading the result

The calculator shows the fabric for each pleat, the width and length of the skirt fabric, and the length and width of the waistband piece. The skirt width is the total length of fabric that goes round the skirt before it is pleated, and it is long, since pleats use a lot of fabric. If your fabric is narrower than this width, you will need to join several pieces, and each join needs its own seam allowance. Plan the joins so that they fall inside a fold of a pleat, where they are hidden.

Choosing a fabric

Light to medium fabrics that hold a crease, such as wool blends, cotton and polyester, are common choices for pleats. A fabric that is too thick makes the waist bulky, and a fabric that is too thin may not hold the pleats. Test a small piece and press it with the iron to see how it behaves. Many makers also stitch the pleats down for a few centimetres at the waist to keep them in place.

Adjusting for the hips

The pleats are set at the waist and open out below it, so a skirt with enough pleats fits over the hips. If you have large hips compared with your waist, check that the pleats open enough by measuring your hip and comparing it with the width of the skirt fabric. The skirt fabric width is usually much larger than the hip, so this is seldom a problem, but a skirt with very few pleats could be tight.

Common mistakes

  • Using the hip instead of the waist. The pleats are set to the waist, and they open below it.
  • Forgetting the hem. The length of the fabric must include it.
  • Choosing too few pleats. The folds get wide and heavy.
  • Not allowing for the fabric width. The total width may need several panels.

What next

Use this often? Add Pleated Skir to your Home screen.

Frequently asked questions

What is a pleated skirt calculator?

A tool that works out the size of the fabric pieces for a skirt with knife or box pleats.

How much fabric does each pleat use?

(Waist ÷ number of pleats) × 2 for knife pleats, or × 3 for box pleats.

How wide is the skirt fabric?

The fabric for each pleat times the number of pleats, plus the seam allowance.

How long is the skirt fabric?

The skirt length plus the bottom hem plus the seam allowance.

What is the size of the waistband piece?

Length = band width × 2 + seam allowance × 2. Width = waist + about 1 inch (3 cm) overlap + seam allowance × 2.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Fun & Lifestyle Tools