A fabric calculator tells you how much fabric to buy to cut a number of pieces of the same size. Enter the width of the fabric, the width and length of one piece and how many pieces you need, and the calculator gives the pieces that fit across, the rows you need and the length to buy. It uses simple rectangle-packing arithmetic, our own working, which suits napkins, squares for a quilt, tablecloths and other pieces with straight edges. It runs in your browser and nothing you enter is sent anywhere.
How to use the fabric calculator
- Choose US or Metric units.
- Enter the width of the fabric as it comes off the roll.
- Enter the width and the length of one piece.
- Enter the number of pieces and press Find the fabric needed.
The three steps
The calculator uses three steps. First, the number of pieces that fit across the fabric is the fabric width divided by the width of a piece, rounded down, since you cannot cut part of a piece. Second, the number of rows is the number of pieces you need divided by the pieces across, rounded up. Third, the fabric you need is the length of a piece times the number of rows. In US units, the length is shown in inches and in yards, and there are 36 inches in a yard, since NIST defines the yard as exactly 0.9144 metre.[1]
Worked example
Our example is 12 squares of 12 by 12 inches cut from a roll that is 60 inches wide. Sixty divided by 12 is 5 pieces across. Twelve divided by 5 is 2.4, which rounds up to 3 rows. Three rows of 12 inches is 36 inches, which is exactly 1 yard, so you should buy at least 1 yard. The same steps for 120 napkins are: divide the fabric width by the napkin width, round down, divide 120 by that number, and multiply by the napkin length.
What to know about fabric
This calculator is meant for geometric home items such as tablecloths and quilts, not for clothes, whose pieces have curved edges and do not pack as neatly. The width of fabric varies, and fabric is usually sold by the yard or the metre. A piece 60 inches wide and 1 yard long has an area of 15 square feet, since 60 times 36 divided by 144 is 15, though that figure does not hold for every width.
What to add
The result is the least fabric that holds the pieces. It does not include seam or hem allowances, so add them to the width and the length of each piece before you enter them. It does not allow for a pattern that must be matched, for a one-way print or a nap, or for fabric that shrinks when washed. Buy a little extra to be safe, and wash the fabric before you cut it if it will be washed later.
Reading the result
The calculator shows the pieces across, the rows, the length of fabric in inches or centimetres, and the amount to buy in yards or metres. If the pieces across is only one or two, check whether turning the piece by a quarter turn would let more fit across, since a long piece may fit better the other way round. Swap the width and the length and run the calculator again to compare the two layouts, then buy the smaller amount.
Planning a layout
Draw the fabric width as a long strip on paper and mark the pieces to scale. This shows how much is left over at the side, which is wasted when the width does not divide evenly. A small change in the size of the piece can sometimes fit one more across and save a whole row. If you have the freedom to choose, make the piece width a divisor of the fabric width.
Buying fabric
Shops sell fabric by the yard or by the metre, and cut it from a roll. Round the result up to the next quarter yard or tenth of a metre. For a big project, buy all the fabric at once from the same bolt, since colour and print can vary a little between batches.
Example with metric units
Suppose you want 120 napkins, each 50 by 50 centimetres, from fabric that is 150 centimetres wide. Three napkins fit across, since 150 divided by 50 is exactly 3. For 120 napkins you need 40 rows, so you need 40 times 50, which is 2,000 centimetres or 20 metres of fabric. If you add a 1-centimetre hem all round and cut each napkin at 52 by 52 centimetres, only two fit across, and the amount rises to 60 rows of 52 centimetres, which is 31.2 metres. This shows how a small allowance can change the answer a lot.
Common mistakes
- Forgetting the allowances. Enter the cut size of each piece.
- Using the width of the whole bolt. Use the usable width, without the selvedges.
- Not rounding down across. Only whole pieces fit.
- Using it for clothes. Curved pieces need a pattern layout.
What next
Use this often? Add Fabric to your Home screen.
Frequently asked questions
What is a fabric calculator?
A tool that works out the length of fabric needed to cut a number of equal pieces from fabric of a given width.
How do you calculate fabric yardage?
Pieces across = fabric width divided by piece width, rounded down. Rows = pieces divided by pieces across, rounded up. Length = piece length times rows.
How much fabric for 12 squares of 12 inches from 60-inch fabric?
5 pieces across, 3 rows, 36 inches, which is 1 yard.
How many inches are in a yard of fabric?
36 inches, since a yard is exactly 0.9144 metre.
Is it suitable for clothes?
No. It is meant for geometric items, and clothing needs a pattern layout.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.