A circle skirt calculator gives you the two radii that you need to draw the pattern for a circle skirt. Enter your waist measurement, the length you want and the type of skirt, which can be a full, three-quarter, half or quarter circle, and the calculator gives the waist radius and the fabric length. It uses the geometry of the circle and a 2 centimetre seam allowance and a 2 centimetre hem allowance, which are our own working. It runs in your browser and nothing you enter is sent anywhere.
How to use the circle skirt calculator
- Choose US or Metric units.
- Choose the skirt type.
- Enter your waist measurement and the skirt length you want.
- Press Find the pattern, then draw the two circles on the fabric.
The waist radius
The waist of a circle skirt is a part of the inner circle. For a full circle the whole circumference of that circle goes round your waist, so its radius is the waist divided by two times pi, because the circumference of a circle is two times pi times the radius. [1] For the other types the waist is only part of the circle, and the arc length is the radius times the angle in radians, [2] so the radius gets a factor: for a three-quarter circle the radius is four thirds of that, for a half circle twice that, and for a quarter circle four times that. In every case the calculator then subtracts 2 centimetres as a seam allowance, which is our own allowance. The smaller the part of the circle, the bigger the radius has to be, so that the waist edge is long enough.
The fabric length
The fabric length is the radius of the outer circle, which sets the hem. It is the skirt length plus the waist radius plus 2 centimetres, where the last 2 centimetres are the hem allowance. To mark the pattern, draw two circles with the same centre, one of the waist radius and one of the fabric length, and cut between them. For a half circle or a quarter circle, you draw only that part of the circles.
Worked examples
Our main example is a three-quarter circle skirt for a waist of 75 centimetres, 60 centimetres long, which is a midi length. The waist radius is four thirds of 75 over two pi, which is 15.9 centimetres, minus 2, so 13.9 centimetres. The fabric length is 60 plus 13.9 plus 2, which is 75.9 centimetres. For a full circle skirt with a waist of 30.7 inches, the waist divided by two pi is 4.886 inches. The calculator takes the allowance as exactly 2 centimetres, which is 0.787 inches, and shows a waist radius of 4.10 inches.
Choosing the type
A full circle skirt swirls the most and uses the most fabric. A three-quarter and a half circle are less full and use less material, and a quarter circle hangs close to the body, like an A-line skirt. If you are unsure, try the half circle first, since it is easier to sew and needs a smaller piece of fabric.
Fabric and layout
The calculator does not work out how much fabric to buy, because that depends on the width of the fabric and on how you lay out the pieces. A big circle may be wider than the fabric, in which case you sew two or more panels together. To plan, draw the outer circle to scale on paper, and fit it on a drawing of your fabric width. Allow for the grain, for a pattern that must match, and for a waistband.
Reading the result
The calculator shows two numbers: the waist radius, which is the radius of the small circle that goes round your waist, and the fabric length, which is the radius of the large circle that sets the hem. Both already include the allowances, so you cut along the lines you draw. If the result for the waist radius is very small or the calculator reports an error, check your waist measurement and the type you chose.
Drawing the pattern
Fold the fabric in half, and in half again if you can, so that the centre of the circle is at the folded corner. Fix a tape or a piece of string at the corner and mark an arc at the waist radius, then another at the fabric length, moving the pencil along the string. Cut along both arcs through all the layers. For a half circle skirt, you cut from a fabric that is folded once, and for a quarter circle, only one layer or one quarter is needed. Open it out and check the waist against your measurement before you sew.
Finishing the skirt
Add a waistband or an elastic casing to the waist edge, and a zip or an elastic if the waist is smaller than your hips. Let a full circle skirt hang for a day before you hem it, since woven fabric is more elastic along the bias, and the cut edges of a circle skirt stretch and the hem may become uneven. [3] Then trim it level and turn up the hem. A narrow hem works best on a wide curve.
Common mistakes
- Measuring the waist loosely. Use the measurement where the skirt will sit.
- Choosing the wrong type. The type changes the waist radius a lot.
- Forgetting the allowances. The radii include them, so do not add them twice.
- Buying too little fabric. Check the layout first.
What next
Use this often? Add Circle Skirt to your Home screen.
Frequently asked questions
What is a circle skirt calculator?
A tool that gives the waist radius and fabric length you need to draw the pattern of a circle skirt.
How do you calculate the waist radius?
For a full circle, the waist divided by 2π, minus 2 cm. Other types divide by their fraction of a circle first.
How do you find the fabric length?
Skirt length plus the waist radius plus 2 cm for the hem.
What are the numbers for a 75 cm waist, 60 cm long, 3/4 circle?
A waist radius of 13.9 cm and a fabric length of 75.9 cm.
Does it tell me how much fabric to buy?
No. That depends on the fabric width and your layout.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.