Saved

Press the star next to a tool's name to save it.

All my tools

Cross Stitch Calculator

Use this cross stitch calculator to find the finished size and the fabric needed for a pattern from its stitch count, fabric count and margin.

Restored your last values ·

Use the stitch count from your pattern. For Aida, stitch over 1 thread. For linen or evenweave, a cross is usually worked over 2 threads, so a 28 count fabric stitches like 14 count.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter a value and press Calculate.

See full result

A cross stitch calculator works out how large a finished design will be and how much fabric you need. Enter the width and height of the pattern in stitches, choose the fabric count and whether you stitch over one or two threads, and add a margin. The calculator shows the finished size and the size of fabric to cut, in inches and centimetres.

Fabric count explained

Cross-stitch fabric is described by its count. Wikipedia explains that fabrics are categorized by threads per inch, referred to as count, which can range from 11 to 40 count. The article adds that the count of the fabric and the number of threads per stitch determine the size of the finished stitching. Cross-stitch is often worked on an easily countable fabric called Aida cloth, which has a plainly visible grid of squares with holes for the needle at each corner. On Aida, each cross covers one square, so a 14-count Aida has 14 stitches to each inch.

Stitching over two threads

On linen and other evenweave fabrics there is no grid of squares, so crosses are worked over two or more threads. Wikipedia gives the example that a 28-count fabric with each cross over two threads gives the same finished size as 14-count Aida with each cross over one square. The calculator handles this by dividing the count by the number of threads covered, which gives the stitches per inch.

Stitches per inch = fabric count ÷ threads per stitch
Design size (in) = stitches ÷ stitches per inch
Fabric size = design size + 2 × margin

How to use the cross stitch calculator

  1. Enter the width and height of the design in stitches. You can find these on the pattern.
  2. Choose the fabric count. It is printed on the fabric label.
  3. Choose how many threads each stitch covers: one for Aida, usually two for linen.
  4. Add a margin for the border you want around the design.
  5. Press Calculate to see the sizes.

Worked examples

  • 140 × 140 stitches on 14-count Aida: 140 ÷ 14 = 10 inches each way, which is 10 × 10 inches (25.4 cm). With a 3 inch margin on each side the fabric is 16 × 16 inches.
  • The same design on 28-count linen over two threads: 28 ÷ 2 = 14 stitches per inch, so the result is the same, 10 × 10 inches.
  • 100 × 150 stitches on 18-count Aida: 5.56 × 8.33 inches, or 14.1 × 21.2 cm.
  • The same design on 11-count Aida: 9.09 × 13.64 inches, much larger, because the stitches are bigger.

Choosing a fabric count

A lower count means larger stitches and a bigger finished piece, and it is easier to see and to stitch. A higher count means smaller stitches and finer detail in the same space, but it is harder on the eyes. If you want a design to be a certain size, rearrange the formula: divide the stitches by the inches you want to find the count. For example, a 140-stitch-wide design that you want at 7 inches wide needs 20 stitches per inch, which would be 20-count Aida, or 40-count linen over two threads.

How much margin to leave

The margin is the unworked fabric around the design. It is needed to hold the fabric in a hoop or frame while you stitch, and to leave room for framing or sewing the piece into something. Many stitchers leave three inches on each side, but there is no fixed rule, and your pattern or finisher may suggest a different amount. The calculator lets you enter any margin, and it shows the fabric size in centimetres as well as inches.

To convert between inches and centimetres use the length converter, and for areas the area converter. If you are measuring a frame or a mat, remember that the finished size does not include the margin.

Reading a pattern

Most patterns state the size of the design in stitches, such as 140 wide by 140 high, and often give a finished size for one or two fabric counts. The calculator lets you try other counts, so you can see how a design would look on a different fabric. If the pattern gives only the stitch count, you can work out everything else from it. Use the full count, including any borders that are part of the chart, and add the margin you want for finishing.

Stitching a small or a large piece

A low count gives a bolder look and stitches that are easy to see, which suits a beginner or a child, and a high count gives fine detail for portraits and small motifs. The finished size changes by a large amount between counts. A design 100 stitches wide is 9.1 inches on 11-count fabric and only 3.1 inches on 32-count fabric. Try different counts until the finished size suits the place where you will hang or use the piece.

Common mistakes

  • Forgetting to divide by threads per stitch. A 28-count fabric over two threads is 14 stitches per inch.
  • Leaving no margin. You need fabric to hold in a hoop and to finish.
  • Using the pattern's size for another count. A pattern's printed size is for its own count.
  • Counting the border stitches twice. Use the full width and height of the pattern.

What next

Use this often? Add Cross Stitch to your Home screen.

Frequently asked questions

How does a cross stitch calculator work?

It divides the fabric count by the threads per stitch to get stitches per inch, divides the design's stitches by that figure for the finished size, and adds your margin on each side.

How do you calculate cross stitch size?

Divide the number of stitches by the fabric count. A 140-stitch-wide design on 14-count Aida is 10 inches wide.

What does fabric count mean?

Wikipedia says fabrics are categorized by threads per inch, called count, which can range from 11 to 40.

What is 28 count over two the same as?

Wikipedia gives the example that 28-count fabric stitched over two threads gives the same size as 14-count Aida stitched over one square.

How much extra fabric do I need?

That is your choice. The margin holds the fabric in a hoop and leaves room for framing. Many stitchers leave about three inches on each side, and the calculator lets you enter any amount.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Fun & Lifestyle Tools