A bag calculator works out the size of the fabric you need to sew a tote bag. Enter the finished width, height and depth, and the calculator gives the width and height of the fabric to cut and the size of the box corners that make the flat bottom. It uses the usual boxed-corner tote drafting formulas.[1][2] It runs in your browser and nothing you enter is sent anywhere.
How to use the bag calculator
- Choose US or Metric units.
- Enter the finished width and height of the bag.
- Choose whether the bag has box corners, and if it does, enter the depth.
- Press Find fabric size.
The formulas
There are three formulas. The fabric width is twice the bag width, plus twice the depth, plus 1. The fabric height is the bag height, plus half the depth, plus 1. The box corner is half the depth. The 1 stands for the seam allowance, which is half an inch on each side. The fabric is cut as one piece and folded in half, so the width covers the front and the back, and the depth adds the width of the bottom and the sides. Published patterns draft the same shape one panel at a time: each panel is the bag width plus the depth wide and the bag height plus half the depth tall, with the seam allowance added on every side.[1][2] Our one-piece version joins the two panels at a fold, so it is our own working.
Box corners
Box corners give a tote bag its flat bottom. After you sew the side and bottom seams, you cut a square from each bottom corner, and then sew the cut edges together, which makes the bag stand up. The side of each square is half the depth,[1][2] so a bag that is 5 inches deep needs squares of 2.5 inches. If you choose a flat bag with no box corners, the calculator treats the depth as zero, so the fabric is twice the width plus the seam allowance by the height plus the seam allowance.
Worked examples
An example in inches: a bag that is 30 inches high and 17 inches wide, with a depth of 5 inches, needs fabric of 45 inches by 33.5 inches. Check it with the formulas: twice 17 plus twice 5 plus 1 is 45, and 30 plus 2.5 plus 1 is 33.5. The box corners are 2.5 inches. An example in centimetres is a bag 32 centimetres wide, 44 high and 18 deep, with box corners. The calculator gives fabric of 102.54 centimetres by 55.54 centimetres, with box corners of 9 centimetres, because it uses a seam allowance of 2.54 centimetres in total, which is one inch.
The seam allowance
The extra 1 in the formulas is in the same units as the other numbers. For a bag measured in inches, it is one inch in all. For centimetres, the calculator adds 2.54, so the allowance stays the same size and the answer matches the one in inches. If you prefer a different allowance, add or subtract the difference from the result.
Storage bags and other uses
You can make storage bags in the same way as tote bags. A storage bag with a flat bottom is a box with a soft top, so the same width, height and depth work. For a drawstring bag or a bag with a gusset, the numbers will differ, and the calculator does not cover them.
What to add
The result is for the main body of the bag. Handles need extra fabric or strap material, and a lining needs a second piece of the same size. Pockets and the top hem need a little more fabric, so cut slightly more than you think you need and trim as you sew. Pre-wash fabric that shrinks.
Reading the result
The calculator shows the width and height of the piece of fabric to cut and the size of the square to cut from each bottom corner. The fabric is one piece, folded in half with the fold at the bottom or the side, depending on how you sew. Mark the corner squares on the folded fabric before you cut them out, so that they are the same on both sides, and check the numbers against your pattern before cutting good fabric.
Choosing the size of the bag
Think about what the bag will carry. A shopping bag needs more depth, so that it stands up and holds the goods. A book bag needs more width than depth. A bag with no box corners is flat, like a pillowcase with handles, and is quicker to make. The bag on the page, 30 inches high, 17 inches wide and 5 inches deep, is a large tote.
Cutting and sewing steps
Cut the fabric to the size given and fold it in half with the right sides together. Sew the two side seams, using the seam allowance of half an inch. Then flatten each bottom corner so that the side seam lies on top of the bottom fold, and sew across the corner at the line where the width equals the depth. Cut off the extra corner or fold it in, turn the bag the right way out, and add the handles and the top hem. These steps follow the usual method for a box-corner tote: stitch across each corner at a 45 degree angle to the bottom and side seams, and use the cut edge as your seam allowance guide.[1]
Fabric choice
Medium to heavy cotton, such as canvas or denim, is a common choice for a strong tote, because the bag has to carry a load. A thin fabric may need a lining or interfacing.
Common mistakes
- Mixing units. Choose US or Metric first.
- Entering the fabric size as the bag size. Enter the finished bag.
- Forgetting the depth. It sets the bottom and the corners.
- Not adding for handles and lining. They need extra fabric.
What next
Use this often? Add Bag to your Home screen.
Frequently asked questions
What is a bag calculator?
A tool that works out the size of the fabric to cut for a tote bag, and the box corners, from the finished size.
How do you work out the fabric for a tote bag?
Fabric width is twice the width plus twice the depth plus 1, and fabric height is the height plus half the depth plus 1.
What are box corners?
Squares cut from the bottom corners, each half the depth of the bag, which are sewn together to make a flat bottom.
How much fabric for a bag 30 inches high and 17 inches wide?
With a depth of 5 inches, 45 inches by 33.5 inches: twice 17 plus twice 5 plus 1, and 30 plus 2.5 plus 1.
Does it include the handles?
No. Handles and lining need extra fabric.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.