Saved

Press the star next to a tool's name to save it.

All my tools

Pine Straw Calculator

Use this pine straw calculator to find how many bales of pine straw mulch your bed needs from its length, its width and the coverage of one bale.

Restored your last values ·

Choose US or metric units. Enter the length and width of the bed. Add the coverage per bale from the bale label if you know it; otherwise the default of 100 sq ft per bale is used, or scaled to the depth that you enter.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the length and width of the bed, then press Calculate.

See full result

A pine straw calculator tells you how many bales of pine straw you need to mulch a garden bed. Enter the length and width of the bed and, if you know it, the coverage of one bale. The calculator finds the area, divides it by the coverage and rounds up to whole bales.

How to use the pine straw calculator

  1. Choose US or metric units.
  2. Enter the length and width of the bed.
  3. Add the coverage per bale from the label, if you know it, and the depth if you want it scaled.
  4. Press Calculate.

The formula

The number of bales is the area of the bed divided by the area that one bale covers. The area of a rectangular bed is its length multiplied by its width. The calculator does both steps, then rounds up, because you cannot buy part of a bale and a shortfall means a second trip to the shop.

A worked example

A bed of 30 by 15 feet has an area of 450 square feet. With a coverage of 40 square feet per bale, you need 450 ÷ 40 = 11.25 bales, which is 12 to buy. A bed of 50 by 30 feet needs 1,500 ÷ 40 = 37.5 bales, which is 38. Enter 40 as the coverage to reproduce both.

Why the coverage is editable

The sources do not agree on one figure. Retail suppliers often quote about 35 to 40 square feet per bale at a depth of 2 to 3 inches, a figure that we could not trace to an official source. NC State Extension says that a 40 pound bale will typically cover about 100 square feet, a bed of 10 by 10 feet, to a depth of 2 inches, and attributes this to Texas AgriLife Extension [1]. Bale weight, depth and needle length all differ, so the coverage is a box that you can change.

The default that we use

If you leave the coverage blank, the calculator uses the NC State figure of 100 square feet for a 40 pound bale at 2 inches [1]. That is the more generous figure, so it gives fewer bales than a coverage of 40. For a bed of 450 square feet, it gives 4.5 bales, which rounds up to 5. If your bales are labelled with a different coverage, enter it and the default is ignored.

Scaling to a depth

If you leave the coverage blank and enter a depth, the calculator scales the default in proportion: 100 square feet × 2 ÷ depth. A 3 inch layer gives about 66.7 square feet per bale, so 450 square feet needs 6.75 bales, which is 7. This scaling is our own working, because no page that we opened states a rule for it. Use it as a rough guide only.

Depth of the layer

NC State Extension advises a layer of 2 to 4 inches of pine needles in North Carolina [1]. A thicker layer suppresses weeds better but uses more straw, so a deeper bed needs more bales. The calculator does not change the coverage that you type for the depth, because the depth is only a note when you enter a coverage yourself. Check the label for the depth that the coverage assumes.

Needle length and quality

NC State Extension says that the needles of the longleaf pine are the most prized for pine needle mulch [1]. We found no figures for how much further different needle types go, so the coverage on the label matters more than the needle type. If you buy long needle straw, you may wish to round down a little rather than up. Looser, fluffier bales can also cover a larger area than tightly baled straw.

How often to replace it

NC State Extension advises annual mulching and notes that weed suppression benefits from annual reapplication [1]. The calculator gives the amount for one application, so for a year of upkeep, multiply the number of bales by the number of times that you plan to top up. A top-up of a thin layer usually needs less straw than a first application, but we have no figure to quote for that.

Irregular beds

The calculator takes a rectangle. For a curved or an irregular bed, measure the longest length and the average width, or split the bed into rectangles, and add their areas. You can also use the area tools on this site to find the area of a circle or a triangle, and enter the result as a rectangle of equal area. Round the measurements up slightly if the edges are uneven.

Buying and spreading the straw

Work out the number of bales before you go to the shop, and round up. Many suppliers sell bales that vary a little in weight, so the label matters more than the type of straw. Spread the straw by hand, pulling the bale apart into loose layers, and keep it a little away from the stems of shrubs and the walls of the house. The layer will settle with time, so a fresh bed looks deeper than it will be after a few weeks. The calculator gives a count for one application only, and it cannot know how deep your last layer was, so look at the bed before you top it up.

Our own working and the limits

The area, the division and the rounding are plain arithmetic. The default of 100 square feet comes from NC State Extension, and 40 square feet is a figure that retailers commonly quote [1]. Scaling the coverage by the depth is the only step of ours that no page states. Where the figures differ so much, the safest course is to buy the bales that the label describes, and to keep one spare bale for patching.

Common mistakes

  • Using the wrong coverage. Read the label, as sources differ from 40 to 100 square feet.
  • Mixing feet and metres. Choose the unit system first.
  • Forgetting to round up. A part bale is not for sale.
  • Ignoring the layer depth. A thicker layer needs more bales.

What next

Use this often? Add Pine Straw to your Home screen.

Frequently asked questions

What is a pine straw calculator?

A tool that finds how many bales of pine straw you need for a garden bed from its area and the coverage of one bale.

How many bales of pine straw do I need?

Divide the area of the bed by the coverage of one bale, then round up. A bed of 450 square feet at 40 square feet per bale needs 12 bales.

How much does one bale of pine straw cover?

Sources differ: about 35 to 40 square feet at a depth of 2 to 3 inches, or about 100 square feet for a 40 pound bale at 2 inches. Check the label.

How thick should pine straw be?

NC State Extension suggests a layer of 2 to 4 inches in North Carolina.

How often should pine straw be replaced?

NC State Extension advises annual reapplication.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools