A phase rule calculator applies Gibbs' phase rule to a system in equilibrium. Enter the number of components and phases to get the degrees of freedom, the number of variables such as temperature and pressure that you can change without altering the number of phases. You can also solve for the phases or the components.
How to use the phase rule calculator
- Choose what you want and whether pressure can vary.
- Enter the other two numbers.
- Press Calculate.
The rule
The general form of the phase rule is F = N + C − P + 1, where N is the number of ways of doing work on the system, C is the number of components and P is the number of phases [1]. For simple fluids N is 1, which gives the familiar F = C − P + 2 [1]. The page shows the derivation: F = (C − 1)P + 2 − C(P − 1) = C − P + 2 [1]. The first term counts the composition variables plus temperature and pressure, and the second removes the equilibrium conditions.
Constant pressure
When the pressure is held constant, the rule becomes F = C − P + 1 [1]. The page notes that this is sometimes wrongly called the condensed phase rule and that it does not apply to high-pressure condensed systems [1]. Choose the second condition in the calculator for such cases, for example when you read a phase diagram at atmospheric pressure.
What the terms mean
F is the degrees of freedom or variance, the number of independent intensive variables, such as temperature, pressure and composition, that you can change without changing the number of phases. C is the number of chemically independent components and P is the number of phases, each homogeneous in composition and physical state. These definitions are standard, and are given in summary form on the page that we read.
Pure substance
For a pure substance, with C = 1, the page gives F = 3 − P [1]. With one phase, F is 2: you can vary temperature and pressure freely. With two phases, F is 1: the pressure follows from the temperature along a boiling or melting line. With three phases, F is 0: the system is invariant, which is the triple point [1]. The calculator describes these cases in plain words.
Impossible cases
A negative answer means that so many phases cannot coexist at equilibrium. The page shows that four phases of pure water, such as two forms of ice, liquid and vapour, would give F = −1, which is meaningless, so they cannot coexist [1]. The calculator says so when F is negative.
Two components
With two components, F = 4 − P. A binary liquid and its vapour, with P = 2, has F = 2: with pressure fixed, you can still vary temperature and composition independently only if you give up one of them, and the calculator's constant-pressure option shows F = 1 in that case [1]. This is the reasoning behind reading a boiling-point diagram of a mixture at a fixed pressure.
Solving the other way
The rule can be turned round. If you know that a system has two degrees of freedom and two components, it has P = C + 2 − F = 2 phases. If it has five phases and one degree of freedom, then C = F + P − 2 = 4 components, as for the page's example of a salt solution with four species and solid phases [1]. The calculator does these rearrangements, which are our own algebra from the formula.
Using phase diagrams
Phase diagrams are the pictures of the phase rule. On an area of a single-component diagram you have two degrees of freedom, on a line one and at a point none. For a mixture at fixed pressure, an area is one phase with two free variables, a tie-line region has one degree of freedom and a eutectic point has none. Use the rule to check which of these you are looking at.
Worked examples
For water alone, with C = 1: one phase gives F = 2, so liquid water can have its temperature and pressure varied freely. Ice and liquid together give P = 2 and F = 1, so the melting temperature changes with pressure along a line. Ice, liquid and vapour give P = 3 and F = 0, which is the triple point. Salt and water with solid salt present has C = 2 and P = 2, so F = 2 in general, or 1 at fixed pressure, where the saturation concentration then depends on temperature alone. These are our own examples of the rule.
Where the rule comes from
Gibbs' rule is a counting argument. Each phase brings its own temperature, pressure and composition variables, and equilibrium between phases imposes equalities that remove some of them. What remains is the number of variables that can be set freely. Because it only counts, the rule says nothing about the values of the variables or about how fast equilibrium is reached.
Common mistakes
- Counting species instead of components. Subtract the independent reactions and constraints.
- Forgetting the pressure condition. Use +1 for fixed pressure.
- Counting phases by number of substances. Phases are distinct homogeneous regions.
- Ignoring a negative answer. It means the phases cannot coexist.
What next
Use this often? Add Phase Rule to your Home screen.
Frequently asked questions
What is a phase rule calculator?
A tool that applies Gibbs' phase rule to find degrees of freedom, phases or components.
What is the phase rule?
F = C − P + 2, where F is the degrees of freedom, C the components and P the phases.
What is the rule at constant pressure?
F = C − P + 1.
Why is F zero at the triple point?
A pure substance has C = 1 and P = 3 phases at the triple point, so F = 1 − 3 + 2 = 0.
What does a negative F mean?
That many phases cannot coexist at equilibrium.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.