A percent yield calculator compares the amount of product you actually obtained with the most that the reaction could have made. It can work out that theoretical yield from the mass and molar mass of the limiting reagent, turn a percent yield back into an actual yield, and find the atom economy of a reaction. Choose a job, enter your numbers and press the button.
How to use the percent yield calculator
- Choose what you want.
- Enter the actual and theoretical yields, or the mass and molar masses of the limiting reagent and the product.
- For atom economy, enter the molecular weights of the desired product and of all the reactants.
- Press Calculate.
The formula
Percent yield is the actual yield divided by the theoretical yield, times 100 [1]. The actual yield is the amount that you physically obtain in the laboratory, and it is often less than the theoretical yield [1]. The theoretical yield is what you would get if all of the limiting reagent reacted to give the product [1], so the limiting reagent decides it. For an actual yield of 132 grams and a theoretical yield of 176 grams, the percent yield is 75 percent.
Finding the theoretical yield
Divide the mass of the limiting reagent by its molar mass to get moles, multiply by the moles of product made per mole of reagent, and multiply by the molar mass of the product. The page's esterification example uses 120 grams of acetic acid with a molar mass of 60 grams per mole, which is 2.0 moles and is the limiting reagent, with ethanol in excess [1]. The product, ethyl acetate, has a molar mass of 88 grams per mole, so 2.0 moles is 176 grams. The page gets 1.5 moles of product, or 132 grams, so the percent yield is 1.5 divided by 2.0 times 100, which is 75 percent [1].
Yields above 100 percent
A true yield cannot exceed 100 percent. Some textbooks say that yields can appear to be 100 percent or more when the product is impure, because the measured weight includes the impurities [1]. The page also says that isolated yields after the usual work-up and chromatography seldom exceed 94 percent [1]. The calculator adds a note when your answer is over 100 percent, so check for wet product, solvent and a wrong molar mass.
Actual yield from a percent yield
If you plan an experiment, you can estimate what to expect. Enter the theoretical yield and an expected percent yield, and the actual yield is the percent divided by 100 times the theoretical yield. A 75 percent yield of 176 grams is 132 grams. The page describes yields near 100 percent as quantitative and those above 90 percent as excellent [1].
Atom economy
Atom economy is the molecular weight of the desired product divided by the molecular weight of all the reactants, times 100 [2]. It was introduced by Barry Trost in 1991, and the best possible value is 100 percent [2]. It is a different concern from chemical yield [2]: a reaction can give a high yield and still waste atoms in by-products. For the esterification, ethyl acetate of 88 and reactants of 60 plus 46, which is 106, give 83.0 percent. That arithmetic is our own, since the page gives no worked example for atom economy.
Limiting reagent
Always find the limiting reagent first. It is the reagent that runs out. In the example, acetic acid is limiting because it is 2.0 moles, while the ethanol is 5.0 moles, a 2.5-fold excess [1]. If you use the wrong one, the theoretical yield comes out too high and the percent yield too low.
Worked examples
If 10 grams of a reagent of 50 grams per mole make one mole of a product per mole of reagent, of molar mass 100, the theoretical yield is 20 grams, and an actual yield of 15 grams is 75 percent. A reaction with a coefficient of 2 for the product makes 40 grams in theory. These are our own calculations.
Why yields fall short
Actual yields are lower than the theoretical yield for many reasons. Reactions may not go to completion, side reactions use up reagents, and some product is lost when you transfer, filter, wash and purify it. Reactions that reach equilibrium leave some of the reagents behind. A high percent yield shows a clean, well-run reaction, while a low one points to a step that needs attention.
Reporting your result
State the mass of the product after drying, the limiting reagent, and the percent yield, and give the method of purification, because the same reaction gives a different yield after chromatography than after a simple filter. For several steps in a row, multiply the percent yields of each step to find the overall yield. Three steps of 90 percent give 72.9 percent overall.
Common mistakes
- Using the excess reagent. The theoretical yield comes from the limiting reagent.
- Mixing grams and moles. Keep the yields in the same unit.
- Forgetting the coefficient. Enter the moles of product per mole of reagent from the balanced equation.
- Ignoring wet product. Dry the product before you weigh it.
What next
Use this often? Add Percent Yiel to your Home screen.
Frequently asked questions
What is a percent yield calculator?
A tool that compares the actual yield of a reaction with the theoretical yield and gives the percent yield, and that works out the theoretical yield and atom economy.
What is the percent yield formula?
Actual yield ÷ theoretical yield × 100. An actual yield of 132 g and a theoretical yield of 176 g give 75 percent.
How do I find the theoretical yield?
Convert the limiting reagent to moles, multiply by the moles of product per mole of reagent, and multiply by the molar mass of the product.
Can a percent yield be more than 100?
Not in theory. A value above 100 percent usually means the product is impure or wet, or that a number was entered wrongly.
What is atom economy?
The molecular weight of the desired product divided by the total molecular weight of the reactants, times 100. The best value is 100 percent.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.