A limiting reagent calculator finds which reactant runs out first in a chemical reaction, how much of the other reactant is left over, and how much product can form. Enter the formula, coefficient and mass of two reactants from a balanced equation, and optionally a product, and this limiting reagent calculator works out the molar masses, the moles of each, the limiting reagent, the leftover excess and the theoretical yield.
How to use the limiting reagent calculator
- Balance the equation first, for example 2 H2 + O2 → 2 H2O.
- Enter reactant A: its formula, its coefficient and the mass you have in grams.
- Enter reactant B the same way.
- Optionally enter a product and its coefficient to get the theoretical yield.
- Press Find limiting reagent.
Formulas can include brackets and hydrates, such as Ca(OH)2 or CuSO4·5H2O. Molar masses are worked out from standard atomic weights.
What the limiting reagent is
The limiting reagent, also called the limiting reactant, is the reactant that is used up completely when the reaction is finished. The amount of product is limited by it, because the reaction can't continue without it. Any other reactant present in more than the amount needed is called the excess reagent. Finding the limiting reagent is also the first step in working out the theoretical yield, which is the amount of product formed when the limiting reagent reacts completely, and from that the percentage yield of a real experiment.
The method
- Convert each mass to moles: moles = mass ÷ molar mass.
- Divide each by its coefficient in the balanced equation.
- The smaller result is the limiting reagent. It tells you how many times the reaction, as written, can happen.
- Excess used = that number × the excess reagent's coefficient; the rest is left over.
- Theoretical yield = that number × the product's coefficient × its molar mass.
This is the same as the textbook approach of taking one reactant and using the balanced equation to work out how much of the other it needs: if more of the other is present than needed, it's in excess.
Worked example
Hydrogen burns in oxygen: 2 H2 + O2 → 2 H2O. You have 10 g of hydrogen and 64 g of oxygen.
- H2: 10 ÷ 2.016 = 4.960 mol; ÷ 2 = 2.480
- O2: 64 ÷ 31.998 = 2.000 mol; ÷ 1 = 2.000
- Oxygen is the limiting reagent, because 2.000 is smaller than 2.480.
- Hydrogen used: 2.000 × 2 = 4.000 mol, so 0.960 mol, or about 1.935 g, is left over.
- Theoretical yield of water: 2.000 × 2 = 4.000 mol × 18.015 g/mol = 72.065 g.
Notice that hydrogen is the limiting reagent by mass only if you ignore the coefficients: 10 g looks small next to 64 g, but hydrogen's tiny molar mass means it's actually in excess.
Why the coefficients matter
A common mistake is to compare the moles of each reactant directly. The balanced equation says how many moles of each react together. In the combustion of benzene, for example, 15 moles of oxygen are needed for every 2 moles of benzene, so 1.5 moles of benzene need 11.25 moles of oxygen. Dividing each reactant's moles by its coefficient puts both on the same footing, so the comparison is fair.
From theoretical to percentage yield
Real reactions rarely produce the full theoretical yield, because of side reactions, incomplete reactions and losses when the product is collected. If you measure the product you actually made, the percentage yield is the actual yield divided by the theoretical yield from this calculator, multiplied by 100. A yield of 72.065 g and an actual 61.3 g, for instance, is a percentage yield of about 85%.
Tips
- Check the equation is balanced before you start; the result is only as good as the coefficients.
- Use grams for every mass.
- Write formulas with the right capitals: Co is cobalt, CO is carbon monoxide.
- Keep extra digits until the final answer to avoid rounding errors.
More than two reactants
The same method works for any number of reactants: divide each one's moles by its coefficient, and the smallest result belongs to the limiting reagent. This calculator handles the most common case of two reactants. For three or more, run it in pairs, comparing the result for each reactant with the others, or work through the steps by hand using the molar masses it shows. The reactant with the smallest moles-to-coefficient ratio is always the one that runs out first.
Where limiting reagents matter
In the lab, knowing the limiting reagent tells you which chemical to measure most carefully and how much product to expect. In industry, manufacturers often add one cheaper reactant in excess on purpose, so the more expensive one is completely used up. In cooking, the same idea appears when a recipe runs out of one ingredient first: you can only make as many batches as the scarcest ingredient allows, however much of everything else you have.
Checking your answer
A quick sense check helps catch errors. The theoretical yield can never be more than the total mass of the reactants, and the leftover excess can never be more than what you started with. In the example, 72.065 g of water plus 1.935 g of leftover hydrogen adds up to exactly the 74 g you started with, which is what conservation of mass requires.
Common mistakes
- Ignoring coefficients. Divide moles by coefficients before comparing.
- Comparing masses. Always convert to moles first.
- Using an unbalanced equation.
- Expecting 100% yield in the lab.
What next
Use this often? Add Limiting Rea to your Home screen.
Frequently asked questions
How does the limiting reagent calculator decide which reactant limits?
It converts each mass to moles, divides by the coefficient from the balanced equation, and the reactant with the smaller result is the limiting reagent.
What is the limiting reagent with 10 g of hydrogen and 64 g of oxygen?
Oxygen. In 2 H2 + O2 → 2 H2O, oxygen supplies 2.000 reaction units and hydrogen 2.480, so oxygen runs out first.
How is the theoretical yield calculated?
Multiply the limiting reagent's moles ÷ coefficient by the product's coefficient and molar mass. In the example, that's 72.065 g of water.
Do I need a balanced equation?
Yes. The coefficients from the balanced equation decide which reactant runs out first.
Can I enter formulas with brackets or hydrates?
Yes. Formulas such as Ca(OH)2 and CuSO4·5H2O are read and their molar masses worked out.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.