The paver calculator works out everything you need for a paver patio or walkway. Enter the area’s length and width and the size of your pavers, and it calculates how many pavers to buy with a waste allowance, the gravel base in cubic yards and tons, the bedding sand, and the length of edge restraint. Add the price per paver to see the cost. For example, a 12 × 10 ft patio of 4 × 8 inch pavers needs 540 pavers, or 594 with 10% extra, plus about 2.14 tons of base gravel for a 4 inch base.
How the paver calculator works
- Pavers per square foot = 144 ÷ (paver length × paver width in inches). A 4 × 8 inch paver gives 4.5 per square foot.
- Pavers to buy = area × pavers per square foot, plus waste, rounded up.
- Base gravel = base area × base depth. Unilock recommends running the base past the paved edge by the same distance as the base depth, so a 4 inch base extends 4 inches beyond each side. Tons use 2,565 lb per cubic yard, the same default as the gravel calculator.
- Bedding sand = paved area × bedding depth.
- Edge restraint = the perimeter.
How to use the paver calculator
- Choose US or metric units.
- Enter the length and width of the area. For an L-shaped patio, work out each rectangle and add them.
- Enter the paver size (4 × 8 inches if blank).
- Set the base and bedding depths (4 inches and 1 inch if blank).
- Set the waste allowance (10% if blank) and the price per paver, if you want the cost.
Worked examples
Small patio: 12 × 10 ft is 120 sq ft. At 4.5 pavers per square foot that’s 540 pavers, or 594 with 10% waste. The 4 inch base covers 12.67 × 10.67 ft (135.1 sq ft), which is 1.67 cubic yards or about 2.14 tons. One inch of bedding sand is 10 cubic feet, and the edging runs 44 ft.
Larger slab pavers: a 20 × 10 ft patio of 12 × 12 inch pavers needs 200 pavers, or 210 with 5% waste. With a 6 inch base, the base covers 21 × 11 ft and takes 4.28 cubic yards, about 5.49 tons.
How deep should the base be?
Unilock’s guide says there is no absolute rule, but recommends 4 to 6 inches of base for pedestrian walkways and patios and 8 to 12 inches for driveways. Clay soils generally need to be dug deeper so water can drain. Hello Gravel’s patio guide also uses a 4 to 6 inch base of 3/4 inch crushed stone with fines. Unilock adds that most plate compactors only compact about 4 inches at a time, so a deeper base should be laid and compacted in layers of 3 to 4 inches.
Bedding sand
The bedding layer is the thin, loose layer the pavers sit in, which lets you set them level. Guides differ on its depth: Hello Gravel’s patio guide uses 2 inches of sand. Enter the depth your paver maker or installer recommends. Unilock advises avoiding stone dust and limestone screenings, which hold water, and notes that a small chip stone can be used instead of sand. It also warns not to compact the bedding layer before laying the pavers.
Slope for drainage
A patio should slope slightly away from the house so rain runs off. Unilock suggests a slope of 1 to 2%, which is a fall of about 1/2 inch over 4 ft for 1%. Build the slope into the base so the bedding layer stays an even thickness.
Waste and patterns
Pavers are cut along edges and around curves, and some arrive chipped. A simple running bond on a rectangle needs little extra, while herringbone, circles and curved edges need more because of the extra cutting. Keep a few spare pavers for future repairs.
Common paver sizes
Pavers come in many sizes and shapes. The classic brick-shaped paver is about 4 × 8 inches, giving 4.5 per square foot, while square 12 × 12 inch pavers give 1 per square foot. Large slabs such as 24 × 24 inches cover 4 square feet each. Check the actual size on the pallet or the product page, as some pavers are sold in metric sizes or in mixed-size bundles. For mixed bundles, the maker usually lists the coverage per bundle instead; divide your area by that figure.
Excavation depth
Add up the layers to find how deep to dig: the base, the bedding layer and the thickness of the pavers. For a 4 inch base, 1 inch of bedding and pavers about 2⅜ inches thick, you would dig roughly 7⅜ inches below the finished surface, plus any extra your soil needs. Remember to dig past the edges too, so the base can extend beyond the pavers as Unilock recommends.
Edge restraints
Pavers need a firm edge to stop them from creeping outward over time. Plastic or metal edging staked into the base, or a concrete curb, holds the outer row in place. The calculator gives the full perimeter; you won’t need edging where the patio meets the house or another hard surface.
Price the base stone separately with the gravel calculator, compare with a poured slab using the concrete calculator, or measure an irregular patio with the square footage calculator.
What next
Use this often? Add Paver to your Home screen.
Frequently asked questions
How does the paver calculator work out how many pavers I need?
It divides 144 by the paver’s length times width in inches to get pavers per square foot, multiplies by the area, adds waste and rounds up.
How many 4 × 8 pavers are in a square foot?
4.5. A 120 sq ft patio needs 540, or 594 with 10% extra for cuts and breakage.
How deep should a paver base be?
Unilock recommends 4 to 6 inches of base for patios and walkways, and 8 to 12 inches for driveways.
How far should the base extend past the pavers?
Unilock recommends extending it past the paved edge by the same distance as the base depth.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.