Saved

Press the star next to a tool's name to save it.

All my tools

Metal Weight Calculator

Use this metal weight calculator to find the weight of a plate, round or square bar or tube in steel, aluminium, copper, brass and other metals, in US or metric units.

Restored your last values ·

Choose US or metric units, the shape and the metal, then enter the size and the number of pieces. You get the weight of one piece and of the whole order.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose the shape, the metal and the size, then press Calculate.

See full result

A metal weight calculator works out the weight of a plate, round bar, square bar or tube from its size and the density of the metal. Choose US or metric units, the shape and the metal, enter the size and the number of pieces, and it gives the weight of one piece and of the whole order.

How to use the metal weight calculator

  1. Choose US or metric units.
  2. Choose the shape and the metal.
  3. Enter the size and the number of pieces.
  4. Press Calculate.

The principle

The weight of a piece equals its volume times the density of the metal. The page on density defines density as ρ = m ÷ V, and the mass follows as m = ρ × V [1]. It also states that the metric units g/cm³, kg/dm³ and t/m³ all have the same numerical value, one-thousandth of the value in kg/m³ [1]. The calculator works the volume in cubic centimetres, multiplies by the density in g/cm³ and gives the mass in grams, then kilograms and pounds.

Volumes of the shapes

A plate or flat bar has a volume of width times thickness times length. A round bar of diameter D has a cross-section of π D² ÷ 4. A square bar has a cross-section of side squared. A tube has a cross-section of π (D² − d²) ÷ 4, where d is the inner diameter, which the calculator finds as the outer diameter minus twice the wall. These geometric formulas are standard and are our own working, not taken from the pages that we read.

Densities used

The calculator uses 2.70 g/cm³ for aluminium, 8.96 for copper, 7.874 for iron, 7.14 for zinc and 4.506 for titanium, from the table of the elements [5]. Copper is also given as 8.935 g/cm³ at 20 °C on its own page [3]. Brass ranges from 8.4 to 8.73 g/cm³ [4], and the calculator uses 8.5, and stainless steel ranges from 7.5 to 8.0 g/cm³ [2], with 7.9 used here. Mild steel at 7.85 and lead at 11.34 are common figures that we entered ourselves.

A worked example

A steel plate 1,000 millimetres wide, 500 millimetres long and 10 millimetres thick has a volume of 5,000 cubic centimetres, and at 7.85 g/cm³ it weighs 39.25 kilograms. A round aluminium bar 50 millimetres in diameter and 1 metre long has a volume of 1,963.5 cm³ and weighs 5.3 kilograms. A steel tube 50 millimetres across with a 5-millimetre wall and 1 metre long weighs 5.54 kilograms. A steel plate 12 by 12 inches and a quarter inch thick weighs about 10.2 pounds. These are our own calculations.

Choosing the metal

The density of an alloy depends on its composition, so use the value from the supplier's data sheet when you need accuracy. The page notes that the density of steel is not a single number, since stainless steels vary from 7.5 to 8.0 g/cm³ [2]. If you work with a material that is not in the list, choose the last option and enter its density in grams per cubic centimetre.

Many pieces

Enter the number of pieces to get the total weight of an order, which is useful for freight, for lifting plans and for estimating the cost of material sold by weight. The total uses the same density and size for each piece. For pieces of different sizes, run the calculator once for each size and add the results.

Limits

The calculator treats each piece as a solid prism. Rolled sections such as angles, channels and beams have rounded corners and varying thickness, so their weight per length is better taken from a table. Cast and welded parts add their own weight. Use the result as an estimate, and weigh critical items.

Estimating from weight per length

For long bars, it can be handy to think in weight per metre or per foot. A round steel bar of 20 millimetres in diameter weighs about 2.47 kilograms per metre, and a flat bar of 50 by 6 millimetres about 2.36 kilograms per metre, both our own calculations at 7.85 g/cm³. Enter a length of one metre to get the figure for any size.

Checking against a supplier

Suppliers quote weight per piece or per metre for standard sizes, and these may differ by a few percent from the calculator because of rolling tolerances. Use the calculator to catch gross errors, such as a plate that weighs ten times more than expected, and use the supplier's figure for the final order. When the material is sold by weight, small percentage differences add up on large orders, so ask for the theoretical or the actual weight explicitly.

Material cost

Multiply the weight by the price per kilogram or per pound to estimate the cost of material. Add allowances for cutting waste and for offcuts, which depend on how the pieces are nested in the stock.

Common mistakes

  • Mixing units. Enter every size in the unit you have chosen.
  • Using the wall as the diameter. For a tube, enter the outer diameter and the wall.
  • Assuming one steel density. Alloys vary, so check the data sheet.
  • Forgetting the pieces. The total is for the number you enter.

What next

Use this often? Add Metal Weight to your Home screen.

Frequently asked questions

What is a metal weight calculator?

A tool that finds the weight of a metal piece from its shape, size and density.

How do I calculate the weight of steel?

Multiply the volume by the density: weight = volume × 7.85 g/cm³ for mild steel.

What is the density of aluminium?

About 2.70 g/cm³.

How do I find the weight of a tube?

Use the cross-section π (D² − d²) ÷ 4, multiply by the length and by the density.

Why does the weight differ from the data sheet?

Alloys, tolerances and rolled shapes change the weight a little.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools