A mean free path calculator estimates how far a gas molecule travels, on average, between two collisions. Choose a gas, enter the temperature and pressure, and you get the mean free path and the number of molecules in each cubic metre. Add a length scale and it also gives the Knudsen number, the usual way of telling continuum flow from free molecular flow.
How to use the mean free path calculator
- Choose US or metric for the temperature.
- Pick the gas, or choose other gas and type its diameter in picometres.
- Enter the temperature and the pressure, and choose the pressure unit.
- Add a length scale if you want the Knudsen number.
- Press Calculate.
What the mean free path is
In kinetic theory the mean free path is the average distance that a particle moves between successive collisions with other particles [1]. For gas molecules treated as hard spheres of diameter d, a collision cross-section of σ = πd² is used, and the number of molecules per unit volume follows from the pressure and the temperature [1]. The calculator reports the result in nanometres, micrometres, millimetres or metres, whichever reads best, and always shows the value in metres as well.
The formula used
The calculator uses λ = k_B T ÷ (√2 π d² p) [1]. Here k_B is the Boltzmann constant, 1.380649 × 10⁻²³ joules per kelvin, T is the absolute temperature, d is the kinetic diameter of the molecule and p is the pressure. The √2 comes from taking the relative motion of all the molecules into account, rather than treating all but one as stationary. Temperatures typed in °F or °C are converted to kelvin first. The number density n = p ÷ (k_B T) is shown in the working line.
A worked example for nitrogen
Take nitrogen, with its 364 pm kinetic diameter [3], at 20 °C (68 °F) and 1 standard atmosphere. The temperature is 293.15 K and the pressure is 101,325 Pa [4]. The result is a mean free path of about 67.86 nm. Wikipedia gives 64–68 nm for air at room temperature and 1013 hPa [1], so the two agree. At that point the number density is about 2.5 × 10²⁵ molecules per cubic metre.
Kinetic diameters of common gases
The gas list holds the kinetic diameters from Wikipedia's table: hydrogen 289 pm, helium 260 pm, nitrogen 364 pm, oxygen 346 pm, neon 275 pm, argon 340 pm, krypton 360 pm, xenon 396 pm, carbon dioxide 330 pm, methane 380 pm and water 265 pm [3]. A diameter is an approximation, since molecules are not hard spheres. Wikipedia's mean free path article adds that the definition of the diameter and the assumed temperature and pressure can shift the figures slightly [1]. Choose other gas to use any value you have.
The Knudsen number
The Knudsen number is the ratio Kn = λ ÷ L, where λ is the mean free path and L is a representative physical length of the problem, such as a pipe diameter or the gap in a device [2]. Enter L, and the calculator divides the mean free path by it. Because the two lengths must be in the same unit, you choose the unit of L in metres, millimetres or micrometres. The result is a dimensionless number that tells you how the gas behaves in that space.
Flow regimes
The flow regime is read from the Knudsen number: below 0.01 the flow is continuum flow, from 0.01 to 0.1 it is slip flow, from 0.1 to 10 it is transitional flow, and above 10 it is free molecular flow [2]. Wikipedia notes that this classification is empirical and depends on the problem [2]. For nitrogen at room conditions in a 0.1 mm gap, Kn is about 0.0007, which is continuum flow. In a gap of 0.0001 mm it is about 0.68, which is transitional.
Why pressure matters so much
Because the mean free path varies as one over the pressure, a pump-down from 1 atmosphere to a millionth of an atmosphere makes it a million times longer. Wikipedia lists 10 cm to 1 km for air at room temperature in high vacuum, 10⁻³ to 10⁻⁷ hPa [1]. The calculator gives about 688 m for nitrogen at 20 °C and 0.00001 Pa, the same order of size.
Temperature and molecule size
At a fixed pressure the mean free path grows in proportion to the absolute temperature, since a hotter gas is less dense. It falls with the square of the diameter, so a larger molecule such as xenon has a shorter path than helium under the same conditions. Doubling the diameter divides the result by four.
Where the Knudsen number is used
The Knudsen number is used for vacuum systems, microchannels, thin films and the flow around small particles. It tells you whether the ordinary equations of fluid flow are sound or whether you must treat individual molecules [2]. The calculator gives you a first estimate of that regime; a design should use data for the actual gas and geometry.
Limits of the estimate
The result assumes an ideal gas of identical hard spheres, with a single diameter for the whole range of temperature. Real molecules attract each other, and their effective size changes with temperature, so values from tables of measured data can differ by several per cent. Gas mixtures such as air are not in the list; use the nitrogen value for a rough figure, since Wikipedia quotes 64–68 nm for air at room conditions [1], or enter your own diameter.
Common mistakes
- Mixing up the diameter and the radius. The table lists diameters; entering a radius gives a result four times too long.
- Using gauge pressure. The formula needs the absolute pressure of the gas.
- Entering the temperature in the wrong unit. Check the US or metric choice before you press Calculate.
- Comparing lengths in different units. The Knudsen number needs λ and L in the same unit; use the unit menu.
- Treating the regime limits as sharp. They are empirical guides, not exact boundaries.
What next
Use this often? Add Mean Free Pa to your Home screen.
Frequently asked questions
What is a mean free path calculator?
A tool that finds the average distance a gas molecule moves between two collisions, from temperature, pressure and molecule diameter.
What is the mean free path of air at room conditions?
Wikipedia gives 64–68 nm at room temperature and 1013 hPa; the tool gives 67.86 nm for nitrogen at 20 °C.
What is the Knudsen number calculator rule?
Kn = mean free path ÷ length scale. Below 0.01 is continuum flow, above 10 is free molecular flow.
Why does the mean free path grow in a vacuum?
There are fewer molecules per cubic metre, so each one travels farther before it meets another.
Can I use it for a gas that is not in the list?
Yes. Choose other gas and enter its kinetic diameter in picometres.
How accurate is the result?
It is an ideal-gas, hard-sphere estimate, so real values can differ by a few per cent.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.