A manometer calculator turns the height difference between the two liquid levels of a U-tube manometer into a pressure difference, or the other way round. Choose mercury, water or your own liquid, enter the height or the pressure, and the result appears in pascals, kilopascals, psi, millimetres of mercury and inches of mercury.
How to use the manometer calculator
- Choose US or metric units.
- Choose what to find and the liquid.
- Enter the height or the pressure.
- Press Calculate.
How a manometer works
A liquid column manometer measures a pressure by the height of a column of liquid that it supports. In a U-tube, the difference between the pressure on one side and a reference pressure P₀, which might be atmospheric pressure or a vacuum, is balanced by the weight of the liquid that stands higher on one side [1]. The calculator does this sum for you.
The hydrostatic formula
The article gives the relation P = h g ρ for a liquid column, and the U-tube form Pₐ − P₀ = h g ρ [1]. Here h is the height difference, g the acceleration of gravity and ρ the density of the liquid. The calculator takes g as 9.80665 metres per second squared, the standard value from the acceleration article [4].
Mercury
The article's conversion table defines the millimetre of mercury using a mercury density of 13,595.1 kilograms per cubic metre, so that 1 mmHg is about 133.322 pascals [1]. The manometer section quotes 13.534 grams per cubic centimetre, a slightly different figure for mercury at another temperature [1]. We use 13,595.1, because it ties in with the unit. A column of 100 millimetres then gives 13.3322 kilopascals.
Water
The article does not give a density for water, so we took it from the properties of water page, which lists 0.99704702 grams per millilitre at 25 degrees Celsius [2]. That is 997.047 kilograms per cubic metre. A water column of 250 millimetres then gives 2,444 pascals, or 2.444 kilopascals. At other temperatures the density differs slightly, and the page shows how much it changes.
Other liquids
Many manometers use oil or a coloured fluid. For these, choose the other option and enter the density in kilograms per cubic metre from the data sheet of the liquid. For example, a light oil of 800 kilograms per cubic metre and a column of 10 inches, which is 0.254 metres, gives 1,992.7 pascals. The lower the density, the taller the column for the same pressure, which makes the reading easier.
Units
The calculator takes the height in inches in US mode and in millimetres in metric mode, and the pressure in psi or in kilopascals. The conversion 1 psi = 6,894.757 pascals comes from the definition of the pound-force as 0.45359237 kilograms times 9.80665 metres per second squared and the inch as 0.0254 metres [3]. The article also lists 1 inHg as 3,386.39 pascals [1].
Finding the height
Rearranging gives h = ΔP ÷ (ρ g). For a pressure difference of 13.3322 kilopascals in mercury, the height is 99.9997 millimetres, essentially 100 millimetres, which matches the definition of the millimetre of mercury. Use this mode to find how tall a tube you need, or how far a liquid will rise for a given pressure.
The reference side
If you enter a pressure on the reference side, the calculator adds the difference to it and shows the pressure on the other side. With a reference of 101.325 kilopascals and a 250 millimetre water column, the other side is 103.769 kilopascals. Whether this is a gauge or an absolute reading depends on the reference: the article says that a word such as gauge or vacuum is added to show whether a reading is above or below atmospheric pressure [1].
Limits
The simple formula treats the liquid as incompressible and its density as fixed. The article says that corrections are used for the density of dense fluids and for the temperature, which are not covered here [1]. Capillary action in narrow tubes, and the weight of the gas above the liquid, are also ignored. For precise work, read the specifications of the instrument.
Using the calculator
Choose your units and what you want, pick the liquid and fill in the box. Compare mercury and water for the same height to see why mercury is used for large pressures: about 13.6 times the pressure for the same height. Then check your answer against the other units shown, millimetres of mercury and inches of mercury, which are the traditional units of manometer readings.
Reading the result
The first line gives the pressure difference in kilopascals, pascals, psi, millimetres of mercury and inches of mercury, so that you can use whichever unit your gauge or specification uses. The second line shows the formula with the density and the height in metres. If you entered a reference pressure, a third line gives the pressure on the other side of the tube.
Sensitivity and tube size
A manometer's reading depends on the density of its liquid. Water gives a tall column for a small pressure, which is easy to read, while mercury gives a short column for a large pressure. For the same height, mercury gives about 13.6 times the pressure of water, since 13,595.1 divided by 997.047 is about 13.6. The width of the tube does not matter in the ideal formula [1].
Common mistakes
- Using the total height of the tube. Use the difference between the two levels.
- Mixing the liquid. Mercury and water differ by a factor of 13.
- Mixing gauge and absolute pressure. Check what the reference side is.
- Ignoring temperature. Density changes with it.
What next
Use this often? Add Manometer to your Home screen.
Frequently asked questions
What is a manometer calculator?
A tool that turns the height difference in a U-tube manometer into a pressure difference, or the reverse.
What is the manometer formula?
ΔP = ρ g h, the density times gravity times the height difference.
What density does the manometer calculator use for mercury?
13,595.1 kg/m³, the value behind the millimetre of mercury.
How high is the column for 1 mmHg?
One millimetre of mercury is about 133.322 pascals.
Does the manometer calculator give gauge pressure?
It gives the difference from the reference side, which is gauge pressure if that side is open to the air.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.