A Malus law calculator finds how much light passes through a polarizer when polarized light meets it at an angle. Enter the incoming intensity and the angle between the light's polarization and the axis of the polarizer, and you get the transmitted intensity. You can also solve for the angle or for the incoming intensity.
How to use the Malus law calculator
- Choose what to find.
- Say whether the light is polarized or unpolarized.
- Fill in the other values.
- Press Calculate.
Malus's law
Malus's law says that when a perfect polarizer is placed in a beam of polarized light, the irradiance that passes through is I = I₀ cos²θ [1]. Here I₀ is the initial intensity, and θ is the angle between the initial polarization direction of the light and the axis of the polarizer [1].
What the angle means
At an angle of zero, the polarization lines up with the axis and the whole beam passes. At 90 degrees the two are at right angles, cos 90° is zero and nothing passes. In between, the transmitted share is the square of the cosine, so at 30 degrees it is 0.75 and at 45 degrees it is 0.5. The calculator shows the cosine squared in its working.
A worked example
For an incoming intensity of 100 and an angle of 30 degrees, cos²(30°) = 0.75, so the transmitted intensity is 75, which is 75 per cent of the beam. This example is our own, since the source article gives no worked calculation for a particular angle [1]. For 60 degrees, the answer is 25, so the calculator can also work the other way round.
Unpolarized light
The article treats unpolarized light as a uniform mixture of linear polarizations at all possible angles. The average of cos²θ over all angles is one half, so the transmission is I ÷ I₀ = 1/2 [1]. When you choose unpolarized light, the calculator takes half of the incoming intensity at the first polarizer, and then applies the cosine law to a second polarizer at the angle that you enter.
Finding the angle
Rearranging the law gives cos θ = √(I ÷ I₀), so θ = arccos √(I ÷ I₀). With an incoming intensity of 100 and 25 coming out, θ = arccos 0.5 = 60 degrees. The calculator gives the angle between 0 and 90 degrees, and also its supplement, 120 degrees, because the cosine squared is the same on both sides. If I is greater than I₀, no angle exists and an error is shown.
Finding the incoming intensity
If you know what came out and the angle, the incoming intensity is I₀ = I ÷ cos²θ. For 75 units out at 30 degrees you get 100. At 90 degrees the transmitted intensity is zero whatever the incoming intensity, so the calculator cannot work back and reports that there is no result. Choose an angle that is not near 90 degrees.
Crossed polarizers
A second polarizer, called the analyzer, is placed after the first, and the angle between their axes is the θ in the law. Crossed polarizers, with the axes at right angles, should in theory pass no light [1]. The extinction ratio, the unwanted to wanted transmission, is about 1 to 500 for Polaroid-type polarizers, according to a summary of the article, so a real pair leaks a little.
A third polarizer
The article notes that a third polarizer inserted between two crossed ones, at an angle to both, lets some light through [1]. You can work this out with the calculator by applying it twice. With polarized light of intensity 100, a polarizer at 45 degrees passes 50, and a second one at 45 degrees to that passes 25, even though the first and the last are crossed.
Real polarizers
The article says that practical transmission for unpolarized light is around 38 per cent for Polaroid-type polarizers, and above 49.9 per cent for some prism types [1]. These practical figures come from a summary of the page, so treat them as approximate. The calculator assumes an ideal polarizer, which transmits exactly the cosine squared share and no more.
Using the calculator
Choose what to find and the type of light, enter the intensity in any unit and the angle in degrees, and press Calculate. The transmitted percentage is shown with the result. Keep all the intensities in the same unit, and use the angle between the light's polarization and the polarizer axis, not the angle between two polarizer sheets that you measured from the edge.
Reading the result
The first line gives the transmitted intensity and the percentage of the incoming beam that it represents, so you can compare different angles at a glance. The second line shows the law with the cosine squared value for your angle. When you solve for the angle, both the acute angle and its supplement are given, because the cosine squared of the two is the same [1].
Why the cosine is squared
The electric field of the light that passes is the component along the polarizer axis, which is proportional to the cosine of the angle. The intensity is proportional to the square of the field, which gives the cosine squared. This short argument is our own explanation, not a statement from the article, but it matches the law as the article gives it [1].
Common mistakes
- Using the angle in radians. Enter degrees.
- Forgetting the half loss for unpolarized light. Choose the unpolarized option.
- Expecting zero for crossed Polaroid. Real sheets leak slightly.
- Using intensities in different units. Keep one unit.
What next
Use this often? Add Malus Law to your Home screen.
Frequently asked questions
What is a Malus law calculator?
A tool that finds the light intensity through a polarizer from the incoming intensity and the angle.
What is Malus's law?
I = I₀ cos²θ, for polarized light on an ideal polarizer.
How much unpolarized light passes a polarizer?
Half, because the average of cos²θ over all angles is one half.
What angle blocks all the light?
90 degrees, where the polarization is at right angles to the polarizer axis.
Does the Malus law calculator allow for real polarizers?
No. It assumes an ideal polarizer, and real ones absorb and leak a little.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.