Saved

Press the star next to a tool's name to save it.

All my tools

Magnetic Permeability Calculator

Use this magnetic permeability calculator to convert between permeability, relative permeability and magnetic susceptibility, or to find μ from the flux density B and field strength H.

Restored your last values ·

T
A/m

Choose what you know: the relative permeability, the permeability, the susceptibility, or the flux density together with the field strength. You get the other two quantities and a note on the type of magnetic response.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you know, fill in the box or boxes, then press Calculate.

See full result

A magnetic permeability calculator converts between the permeability of a material, its relative permeability and its magnetic susceptibility. Enter any one of them, or the flux density B and the field strength H, and you get the other quantities and a note on whether the response is diamagnetic, paramagnetic or ferromagnetic.

How to use the magnetic permeability calculator

  1. Choose what you know.
  2. Fill in the value or values that appear.
  3. Press Calculate.
  4. Read the permeability, relative permeability and susceptibility.

What permeability means

Magnetic permeability tells you how well a material supports a magnetic field inside it. The relation is B = μ H, where B is the magnetic flux density, H the magnetic field strength and μ the permeability [1]. A material with a high permeability concentrates the field, which is why iron cores are used in transformers and electromagnets.

The permeability of free space

The permeability of empty space is a constant, μ₀ ≈ 4π × 10⁻⁷ henries per metre [1]. The henry is a unit of inductance, so the unit of permeability is a henry per metre. Every result on this page is measured against that constant. The calculator uses the rounded value 4π × 10⁻⁷, which is accurate for everyday work.

Relative permeability

The relative permeability is the permeability divided by the permeability of free space: μᵣ = μ ÷ μ₀ [1]. It has no unit, and it is the number that you meet most often in data tables, because it says directly how many times better than a vacuum the material carries a field. A relative permeability of 1 means the material behaves like free space.

Magnetic susceptibility

The susceptibility χ links the magnetisation M of a material to the field: M = χ H [2]. In SI units, χ = μ ÷ μ₀ − 1 = μᵣ − 1 [1][2]. A susceptibility of zero means no response at all. A negative value means the material weakens the field inside it, and a positive one means it strengthens the field.

A worked example

Take a material with a relative permeability of 5,000. Its permeability is 5,000 × 4π × 10⁻⁷, which is 6.2832 × 10⁻³ henries per metre, or about 6,283 microhenries per metre. Its susceptibility is 5,000 − 1 = 4,999. This is our own example. The calculator shows all three values at once.

From B and H

If you have measured the flux density and the field strength, the permeability is μ = B ÷ H, from the relation above [1]. For B = 0.5 tesla and H = 400 amperes per metre, μ = 1.25 × 10⁻³ henries per metre, so μᵣ = 994.7 and χ = 993.7. The calculator also gives the magnetisation M = χ H, which is about 397,487 amperes per metre for this case.

Diamagnetic, paramagnetic, ferromagnetic

Materials are grouped into diamagnetic types, with a relative permeability below 1, and paramagnetic types, with a relative permeability above 1, besides the strongly magnetic ferromagnetic types [1]. A diamagnetic material has a negative susceptibility, a paramagnetic one a small positive value [2]. No numeric cut-off is given for ferromagnets, so our rule of thumb is to call a response ferromagnetic when μᵣ is 100 or more. This is our own working, not a standard.

Superconductors

A superconductor has zero permeability below its critical temperature, with a susceptibility of −1 [1]. That is the limiting case μᵣ = 0 and χ = −1, and the calculator accepts it. It tells you that the field is completely excluded from the material.

Limits of a single number

A single permeability value is a simplification. In a ferromagnetic material, μ changes with the field, because the material saturates, and it depends on the frequency and temperature. The ratio B ÷ H taken at one point is the value at that point only. We give no table of material values, so use the data sheet of your material for real design.

Using the calculator

Pick the quantity that you know and fill in the value. Remember that the permeability box takes microhenries per metre, so that 1.2566 µH/m is about the permeability of free space. The result lines show μᵣ, μ in henries per metre and µH/m, and χ. Try a relative permeability of 1 to confirm that the susceptibility is zero.

Reading the three results

The first line gives the relative permeability, the permeability in henries per metre and in microhenries per metre, and the susceptibility, so that you can copy whichever form your data sheet uses. The second line repeats the formulas with your numbers, and the third line classifies the response. If a result looks odd, compare it with the free space value: a relative permeability of 1 means that the material has no effect on the field.

Why the susceptibility can be negative

Because the relative permeability cannot be below zero, the susceptibility cannot be below minus one, and the calculator rejects anything lower. A value between minus one and zero is a diamagnetic material, which weakens the field slightly. A value of exactly minus one is the limiting case of a perfect superconductor, in which the field is completely pushed out [1].

A worked example from the permeability

Suppose a data sheet gives a permeability of 1,000 microhenries per metre, which is 1 × 10⁻³ henries per metre. Divide by μ₀ = 4π × 10⁻⁷ to get the relative permeability: 1 × 10⁻³ ÷ 1.2566 × 10⁻⁶ = 795.77 [1]. The susceptibility is χ = μᵣ − 1 = 794.77 [2]. This is our own example. Because μᵣ is above 100, the calculator labels the response as ferromagnetic under its rule of thumb. If you enter 795.77 as the relative permeability instead, you should get the same permeability back, which is a good way to check a result by working in the opposite direction.

Common mistakes

  • Entering the permeability in henries per metre. The box expects microhenries per metre.
  • Confusing μ and μᵣ. The relative value has no unit.
  • Treating a ferromagnet's μᵣ as fixed. It changes with the field.
  • Using a negative μ. A negative permeability is not accepted.

What next

Use this often? Add Magnetic Per to your Home screen.

Frequently asked questions

What is a magnetic permeability calculator?

A tool that converts between permeability, relative permeability and susceptibility, or finds μ from B and H.

What is the formula for relative permeability?

μᵣ = μ ÷ μ₀, with μ₀ = 4π × 10⁻⁷ H/m.

How is susceptibility related to relative permeability?

χ = μᵣ − 1.

What is the unit of magnetic permeability?

The henry per metre, H/m.

What is the permeability of free space?

4π × 10⁻⁷ henries per metre.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools