An Alfvén velocity calculator finds the speed of Alfvén waves in a plasma from the strength of the magnetic field and the density of the plasma. Enter the field in tesla, gauss or nanotesla, and the density as a mass density or a particle count, and it gives the speed in metres and kilometres per second.
How to use the Alfvén velocity calculator
- Enter the magnetic field and choose its unit.
- Enter the density, as a mass density or a particle count.
- For a particle count, add the mass of each particle.
- Press Calculate.
The formula
The Alfvén speed is the speed at which waves travel along magnetic field lines in a plasma. It is v_A = B ÷ √(μ₀ ρ), where B is the magnetic field, ρ the mass density of the plasma and μ₀ the permeability of free space [1]. The page that we read does not give the value of μ₀, so we use 4π × 10⁻⁷ newtons per ampere squared, from our own knowledge.
A worked example
For a field of 1 tesla and a density of 1 kilogram per cubic metre, the speed is 1 ÷ √(1.2566 × 10⁻⁶), which is 892.06 metres per second. A stronger field raises the speed in proportion, and a denser plasma lowers it, by the square root of the density. Doubling the field doubles the speed, and quadrupling the density halves it. This example is our own calculation.
Particle count
In space and in the laboratory, the density of a plasma is often given as a number of particles per cubic metre. The mass density is then the number times the mass of each particle. For hydrogen, the mass of a proton is about 1.67262192 × 10⁻²⁷ kilograms. A field of 50 nanotesla and 10 million protons per cubic metre gives 344,879 metres per second, about 345 kilometres per second. The proton mass is our own figure.
Gauss and nanotesla
Space physicists measure fields in nanotesla and the older unit, the gauss. One gauss is 10⁻⁴ tesla, and one nanotesla is 10⁻⁹ tesla. The Earth's field at the surface is about 0.5 gauss. The calculator converts them to tesla. Note that the formula in this form uses SI units, so a field in gauss would give a wrong result if it were used in the formula without conversion.
Where it matters
The Alfvén speed is a key speed in magnetized plasmas, such as the solar wind, the Sun's corona and fusion devices. It is used to judge whether a flow is faster or slower than the Alfvén waves, and so whether the plasma can respond to a disturbance. The ratio of a flow speed to the Alfvén speed is called the Alfvén Mach number.
Limits
The formula is for the non-relativistic case, where the Alfvén speed is much less than the speed of light. In a very strong field or a very thin plasma the formula gives speeds near or above the speed of light, and a relativistic correction is needed. The calculator does not apply one. The density must also be the mass density of all of the plasma, including the ions and any heavier species.
Mixed plasmas
For a plasma of several kinds of ions, add up their mass densities before you enter them. In particle mode, use the average mass per particle in proton masses. Electrons add very little mass, so for a hydrogen plasma you can count the protons alone, as the calculator does by default. For helium, enter 4 for the mass of each particle.
Using the calculator
Choose the density form that your data has, enter the field with its unit and press the button. The working line shows the field in tesla and the density in kilograms per cubic metre that were used. Use it to compare conditions in the solar wind, the corona or a laboratory plasma, and to check the answers to exercises.
Check your inputs
If the result looks too big or too small by a large factor, check the unit of the field, and whether the density is per cubic metre or per cubic centimetre. A density per cubic centimetre is a million times smaller than the same density per cubic metre in value, which changes the answer by a factor of one thousand.
Scaling with the field and the density
The speed grows in proportion to the field and falls with the square root of the density. A field of 2 tesla and a density of 4 kilograms per cubic metre gives the same speed as 1 tesla and 1 kilogram per cubic metre, 892.06 metres per second, since doubling the field is cancelled by quadrupling the density. This scaling is a quick way to check a result by hand, and the example is our own.
The Alfvén Mach number
Divide the speed of a flow by the Alfvén speed to get the Alfvén Mach number. A value below 1 means that the magnetic field dominates the flow, and a value above 1 means that the flow dominates the field. The calculator gives the speed, so you can make this comparison yourself.
Common mistakes
- Using a field in gauss as tesla. Choose the right unit.
- Entering particles per cm³. The input is per m³.
- Forgetting the particle mass. Use proton masses.
- Using it for very strong fields. It is not relativistic.
What next
Use this often? Add Alfvén Veloc to your Home screen.
Frequently asked questions
What is an Alfvén velocity calculator?
A tool that finds the speed of Alfvén waves from the magnetic field and the density of a plasma.
What is the formula for the Alfvén speed?
v_A = B ÷ √(μ₀ ρ).
What happens if I double the field?
The Alfvén speed doubles.
How do I enter the density of a plasma?
As a mass density, or as a particle count per cubic metre with the mass of each particle.
Is the formula valid at relativistic speeds?
No. It is for speeds much below the speed of light.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.