Saved

Press the star next to a tool's name to save it.

All my tools

Lubricant Cost to Run Calculator

Use this lubricant cost to run calculator to add a bike chain lube's price to the chains, cassette and chainrings it wears out over a distance, from the wear that you measure.

Restored your last values ·

%
%

Enter how far you ride, how much your chain stretches per 1,000 miles or kilometres with a lube, what the lube costs for that distance, and the price of a chain. Add a cassette and chainring set if you want to count them. You get the cost of running the lube.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the distance, the chain wear and the prices, then press Calculate.

See full result

A lubricant cost to run calculator adds the price of a bike chain lube to the cost of the chains, cassettes and chainrings that it wears out over a distance. You enter the wear that you measure with a lube, its cost and your part prices, and the calculator gives the total and the cost per 1,000 miles or kilometres, so that two lubes can be compared fairly.

How to use the lubricant cost to run calculator

  1. Choose US or metric units, and exact or whole chains.
  2. Enter the distance and the chain wear per 1,000 units that you measured with the lube.
  3. Enter the lube cost for that distance and the price of a chain. Add a cassette and chainring set if you want them counted.
  4. Press Calculate.

What it works out

A cheap lube that wears out chains quickly can cost more than a dear one that protects them. This calculator puts the two costs together. It estimates how many chains your distance uses up, from the wear that you enter, adds the share of the cassette and chainrings that those chains wear out, and adds the price of the lube. The result is the total cost for the distance, and the cost per 1,000 miles or kilometres.

What the sources say

Park Tool, a bike tool maker, says that a chain used beyond its wear limit will wear out the cogs and chainrings early, and that a worn chain meshes poorly with them [1]. It gives general replacement points: 1.0 per cent wear for single-speed chains, 0.75 per cent for 10-speed and older drivetrains, and 0.5 per cent for 11-speed and newer [1]. It does not say how many chains a cassette or chainring set lasts, and it gives no wear figures for any lube. The wear ratios in this tool are therefore our own working, and so is the rest of the model.

Our model

The model has one idea: chains used = distance ÷ 1,000 × the wear per 1,000 ÷ the wear at which you replace a chain. The cost is the lube plus the chains used × (the price of a chain + the cassette ÷ 2 + the chainrings ÷ 6). The halves and sixths assume that a cassette lasts as long as two chains and a set of chainrings as long as six. That assumption is our own and no source we opened states it, so change the part prices to match your own experience. It has no lube presets, since we have no wear figures that we could cite.

The wear limit

The chain wear at which you replace a chain is a box with a default of 0.5 per cent. The default of 0.5 per cent is the replacement point that Park Tool gives for 11-speed and newer chains [1]. For a 10-speed or older chain use 0.75, and for a single-speed chain 1.0. Park Tool also says that every drivetrain maker has its own specifications [1], so change it to the figure that your chain maker uses. Chain wear is how much a chain has stretched, as a percentage of its length. You can measure it with a chain checker tool at the start and end of a test, and divide by the distance in thousands.

A worked example

You ride 5,000 kilometres, and your chain stretches 0.1 per cent per 1,000 kilometres with the lube. At a replacement limit of 0.5 per cent, that is 5 × 0.1 ÷ 0.5 = 1 chain. The lube costs 20, a chain 40, a cassette 120 and a chainring set 150. The parts cost 1 × (40 + 60 + 25) = 125, and the total is 145, or 29 per 1,000 kilometres. The numbers are our own, chosen to be easy to follow.

Comparing two lubes

Run the calculator twice. Suppose a dearer lube costs 30 for the same 5,000 kilometres but your chain stretches only 0.06 per cent per 1,000 kilometres. The chains used are 5 × 0.06 ÷ 0.5 = 0.6, the parts cost 0.6 × 125 = 75, and the total is 105, or 21 per 1,000 kilometres. That is cheaper than the first lube at 145, although the lube costs more. The wear figures here are only an illustration, not the results of a test.

Exact or whole chains

In the exact mode, the number of chains can be a fraction, which gives the average cost over a long time. In the whole chains mode, the tool rounds the number of chains up to a whole number, since you buy a chain at a time. Riding 2,000 kilometres at 0.1 per cent uses 0.4 of a chain, and the whole mode counts it as 1 chain. The rounding rule is our own.

Getting the wear figure

The wear per 1,000 kilometres is the number that matters most, and only your own measurements can supply it. Measure the chain with a wear gauge when it is clean, ride a known distance with one lube, measure again, and divide the change by the distance in thousands. Keep the conditions the same for each lube that you compare, as dirt, rain and cleaning habits change the wear a lot.

What is not in the model

The model does not rate any lube, and it does not know your terrain, your drivetrain or your weather. It ignores the time you spend on cleaning and re-applying, the cost of a cleaner, and the value of the efficiency of a lube. The ratios of two chains to a cassette and six to a set of chainrings are our own assumption, and your parts may last for longer or shorter.

Units and money

The distance can be in miles or kilometres, and the wear is then per 1,000 miles or per 1,000 kilometres. The calculation is the same in both, so only the labels change. Use one currency for all the prices. The result shows the cost with two decimals and no currency symbol.

Common mistakes

  • Entering the wear in the wrong distance unit. Use miles in US mode and kilometres in metric mode.
  • Forgetting the price of the lube for the same distance. Use the cost of the amount that you use over the ride.
  • Taking one wear measurement as exact. Repeat the test if you can.
  • Leaving out the cassette and chainrings. They are part of the real cost.

What next

Use this often? Add Lubricant Co to your Home screen.

Frequently asked questions

What is a lubricant cost to run calculator?

A tool that adds the price of a chain lube to the cost of the drivetrain parts that it wears out over a distance.

How many chains does a ride use?

Chains used = distance ÷ 1,000 × the wear per 1,000 ÷ the replacement wear, where the replacement wear is 0.5 per cent unless you change it.

How long do cassettes and chainrings last?

This tool assumes that a cassette lasts as long as two chains and a set of chainrings as long as six. That is our own assumption, not a published figure, so adjust the part prices to suit.

Does it rate any lube?

No. It has no lube presets. You enter the wear that you measured and the price.

Why does the tool not use published lube wear data?

We found no published wear data for lubes that we could cite, so this tool is a simple model of our own. You enter the wear that you measure.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools