A laser linewidth calculator finds how far a laser is from perfect monochromatic light. It gives the linewidth from the output power, the bandwidth from a wavelength range, and the coherence length, which tells you how far the light stays in step with itself.
How to use the laser linewidth calculator
- Choose what to find.
- Enter the wavelength and the other values that appear.
- Press Calculate.
What linewidth is
The linewidth of a laser is the spectral width of its emitted line [1]; this tool treats it as a full width at half maximum. It measures how much of the output power lies away from the central frequency. A narrower linewidth means purer light. Linewidth is not the same as bandwidth: the bandwidth is the range of frequencies the laser can emit, and the linewidth is the part actually used.
The linewidth formula
The tool uses the simplified Schawlow–Townes expression Δν = π h ν Γ² ÷ P, where h is the Planck constant, ν is the frequency of the light, Γ is the cavity linewidth and P is the output power. Wikipedia gives the original Schawlow–Townes approximation with a factor of 2π for a full-width cavity linewidth, and calls it of mostly historical interest [1], so this tool's figure is an approximation and may differ from other definitions by a small factor. A higher power gives a narrower line. The Planck constant has the exact value 6.62607015 × 10⁻³⁴ joule seconds [3], and the frequency comes from ν = c ÷ λ, with the speed of light c as 299,792,458 metres per second [4].
A worked example
Take a helium-neon laser at 632.8 nanometres, which is about 473.755 terahertz, with an output of 1 watt and a cavity linewidth of 1 gigahertz. The result is 0.9862 hertz. A laser pointer of 635 nanometres, 5 milliwatts and 10 gigahertz gives about 19.7 kilohertz: enter 0.005 watts and 10 gigahertz to check.
Bandwidth
The tool finds the bandwidth from the edges of the wavelength range, using ν = c ÷ λ: Δν = c ÷ (λ₀ − Δλ ÷ 2) − c ÷ (λ₀ + Δλ ÷ 2) [4]. For a blue helium-cadmium laser with a centre of 411.6 nanometres and a range of 1 nanometre, the result is about 1.77 terahertz. In general the bandwidth of a real device is normally taken from its specification.
Coherence length
Coherence length is the distance over which the light keeps a fixed phase relation. The Wikipedia page gives the approximation L ≈ c ÷ (n Δf) ≈ λ² ÷ (n Δλ), where n is the refractive index, Δf the bandwidth and Δλ the wavelength range [2]. The calculator offers both forms. For a linewidth of 100 megahertz in a vacuum, the coherence length is about 3 metres.
A sodium lamp
The Wikipedia page gives a sodium lamp with a line width of about 0.052 angstroms, or 0.0052 nanometres, per D line, and a coherence length of about 67 millimetres [2]. With a wavelength of 589 nanometres, the formula λ² ÷ Δλ gives 66.7 millimetres, so the wavelength form reproduces the page's number. Enter 589 and 0.0052 in the wavelength mode to see it.
Long coherence
The page says that single-mode fibre lasers with linewidths of a few kilohertz can have coherence lengths of more than 100 kilometres, and single longitudinal mode lasers can exceed 1 kilometre [2]. Multimode helium-neon lasers typically have a coherence length of the order of centimetres. These figures show why narrow linewidth lasers are used in interferometry and sensing, where the path difference must stay within the coherence length.
What this page does not give
This calculator does not show a coherence time, because we did not find a relation between coherence time and linewidth that we could check. The coherence length shown for the linewidth mode uses c ÷ Δν, with a refractive index of 1, and is an order-of-magnitude figure. Different definitions of linewidth change the factor by a number near 1.
The refractive index
In a medium, the speed of light is lower, and the coherence length in the formula shrinks by the refractive index n [2]. The box is optional and equals 1 if left blank, which is the case for a vacuum and nearly so for air. For glass with n of 1.5, the sodium lamp example gives 44.5 millimetres. Values below 1 are rejected.
Using the calculator
Pick the quantity, enter the wavelength and the other values, and read the result with its working. Compare a narrow laser with a broad lamp to see the size of the difference. For a real device, take the linewidth from its data sheet or from a measurement, since the simplified formula of this tool depends on the cavity linewidth that you give it.
Choosing between the modes
Use the linewidth mode when you know the output power and the cavity linewidth, as in the examples above. Use the bandwidth mode when a data sheet gives a wavelength range, and the coherence modes when you need a length scale for interference work. A path difference larger than the coherence length washes out interference fringes, so compare it with the figure you get [2]. The results are only as good as the inputs, and the linewidth formula is a simplified expression.
Why the units matter
Wavelengths are entered in nanometres and the power in watts. Linewidths come out in hertz, kilohertz, megahertz, gigahertz or terahertz, whichever fits the size. A small slip, such as milliwatts for watts, changes the linewidth by a factor of a thousand, so check the units of the boxes before you press the button and compare the answer with the examples on this page.
Common mistakes
- Confusing linewidth with bandwidth. The linewidth is the width of the emitted line, the bandwidth the range the laser can cover.
- Using milliwatts for the power. Enter the power in watts.
- Treating the coherence length as exact. It depends on the definition.
- Entering the wavelength range in picometres. Use nanometres.
What next
Use this often? Add Laser Linewi to your Home screen.
Frequently asked questions
What is a laser linewidth calculator?
A tool that finds the linewidth, bandwidth or coherence length of a laser.
What is the laser linewidth formula?
Δν = π h ν Γ² ÷ P, from the frequency, the cavity linewidth and the output power.
How do you find the coherence length from the linewidth?
L ≈ c ÷ (n Δf), with the speed of light, the refractive index and the linewidth.
What is the difference between linewidth and bandwidth?
Linewidth is the width of the emitted line, and bandwidth is the range of frequencies the laser can emit.
Is the coherence length exact?
No. It is an approximation that depends on how linewidth is defined.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.