A Kd calculator finds the dissociation constant of a binding pair, such as a drug and its target or an antibody and its antigen. Enter the free concentrations of the two partners and of the complex and it gives Kd and the association constant. Or enter a Kd and a ligand concentration to find the fraction of sites that are occupied.
How to use the Kd calculator
- Choose a concentration unit and what to work out.
- For Kd, enter the free [A], the free [B] and the complex [AB]. For occupancy, enter the Kd and the free ligand concentration.
- Press Calculate.
What Kd is
The Wikipedia article on the dissociation constant says that for a protein and a ligand that form a 1 to 1 complex, K_D = [L][P] ÷ [LP], where the square brackets are molar concentrations at equilibrium, and that the dissociation constant has molar units.[1] In general, for a complex AxBy the constant is [A] to the power x times [B] to the power y divided by [AxBy].[1] Enter 2, 3 and 6 nanomolar for [A], [B] and [AB] and the calculator gives Kd = 2 × 3 ÷ 6 = 1 nM.
What the value means
The page says that the smaller the dissociation constant, the more tightly the ligand is bound, and that Kd is the concentration of ligand at which the concentration of protein with ligand bound equals the concentration of protein with none, which is half occupancy.[1] A ligand with a nanomolar Kd binds more tightly than one with a micromolar Kd.[1] The page gives the biotin and avidin pair at roughly 10 to the power −15 M, one femtomolar, and says that sub-picomolar constants for non-covalent binding are rare.[1] It also says that the target for drug design is typically 0.1 to 10 nM.[1]
The association constant
The page says that the affinity constant usually refers to the association constant, K_A = [AbAg] ÷ ([Ab][Ag]), which is 1 ÷ K_D, in the section on antibodies.[1] The calculator shows Ka as 1 divided by Kd in molar units. For a Kd of 1 nM, Ka is 10 to the power 9 per molar. The page warns that the symbol K_a, used for the acid dissociation constant, can lead to confusion with the association constant, so check which one a source means.[1]
Fraction bound
For a single site, the page gives the complex concentration as [AB] = [A]0 [B] ÷ (K_D + [B]), where [A]0 is the total concentration of the first partner.[1] The fraction of the first partner that is bound is therefore [L] ÷ (Kd + [L]), where [L] is the free ligand concentration. At [L] = Kd the fraction is one half, as the page says for half occupancy. At [L] = 9 × Kd it is 90 percent, and at 99 × Kd it is 99 percent. Enter a Kd of 10 nM and a ligand of 90 nM to see 90 percent.
Ligand for a target occupancy
To find the ligand concentration for a given fraction f, rearrange: [L] = Kd × f ÷ (1 − f). For 90 percent of the sites occupied with a Kd of 10 nM, the free ligand must be 10 × 0.9 ÷ 0.1 = 90 nM. This rearrangement is our own algebra from the page's formula.
Several identical sites
For a protein with n identical and independent sites, the page gives the bound ligand as n [M]0 [L] ÷ (K_D + [L]), where [M]0 is the total protein concentration.[1] The calculator shows the average number of ligands bound per protein, n [L] ÷ (Kd + [L]), if you enter the number of sites. For two sites at 90 percent occupancy this is 1.8 ligands per protein.
When the formula applies
The occupancy formula uses the free ligand concentration. If the ligand and the protein are at similar concentrations, binding removes ligand from the solution, and the free concentration is lower than the total that you added. The pages we read give mass-balance relations for this case but no quadratic solution, so this calculator expects the free concentration, which is accurate when the ligand is in large excess.[1]
Worked examples
An antibody with a Kd of 5 nM is used at a free concentration of 20 nM: the fraction bound is 20 ÷ 25 = 80 percent. A drug with a Kd of 0.5 nM needs a free concentration of 4.5 nM for 90 percent occupancy. A pair with a Kd of 1 pM is bound at 99 percent at a free ligand of 99 pM. A protein of 2 sites with a Kd of 10 µM at 10 µM free ligand has 1 ligand per protein on average. These are our own examples.
Units
Keep every concentration in the same unit, chosen in the unit box, and read the answer in the unit that suits it; the calculator converts the result to the nearest convenient unit. A Kd quoted in nanomolar is a thousand times smaller than one quoted in micromolar, so check the unit of any published value.
Common mistakes
- Using total instead of free concentrations. Kd uses the concentrations at equilibrium of the free partners.
- Mixing units. Use the same unit for every concentration.
- Confusing Kd and Ka. They are inverses of each other.
What next
Use this often? Add Kd to your Home screen.
Frequently asked questions
What is a Kd calculator?
A tool that finds the dissociation constant of a binding pair from equilibrium concentrations, and the fraction of binding sites occupied at a ligand concentration.
What is the formula for Kd?
Kd = [A][B] ÷ [AB], in molar units, with the concentrations at equilibrium.
What does a smaller Kd mean?
Tighter binding. A nanomolar Kd binds more tightly than a micromolar one.
How is Kd related to Ka?
The association constant Ka is 1 ÷ Kd.
How do I find the fraction bound?
Fraction bound = [L] ÷ (Kd + [L]). It is one half when the free ligand equals Kd.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.